kern/74136: FreeBSD 5.3 does not see RAID 1 drive only Physical's with 6300ESB

Thu Mar 2 02:00:24 PST 2006

The following reply was made to PR kern/74136; it has been noted by GNATS.

From: "KSA Technologies" <ksatechnologies at comcast.net>
To: "'Internet Partners, Inc. Tech Support'" <support at ipinc.net>,
	<bug-followup at FreeBSD.org>
Cc:  
Subject: RE: kern/74136: FreeBSD 5.3 does not see RAID 1 drive only Physical's with 6300ESB
Date: Thu, 2 Mar 2006 04:57:16 -0500

 I have successfully installed 6.0 on an ASUS NCCH-DR motherboard.  It is
 using the RAID1 metadata from the Adaptec bios and the ICH controller =
 with
 SATA drives.  I only have one anomaly and that is a warning of " =
 atapci1:
 failed to enable memory mapping!" but it still seems to work.

 Good job and thanks,

 Kev

 Here is the dmesg output for reference.

 Copyright (c) 1992-2005 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights =
 reserved.
 FreeBSD 6.0-RELEASE-p4 #0: Sun Feb 26 08:32:59 EST 2006
     root at mx01.barsproducts.com:/usr/obj/usr/src/sys/Bars-MX01
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Xeon(TM) CPU 3.00GHz (3000.12-MHz 686-class CPU)
   Origin =3D "GenuineIntel"  Id =3D 0xf34  Stepping =3D 4
 =20
 Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
 E,MCA
 ,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=3D0x441d<SSE3,RSVD2,MON,DS_CPL,CNTX-ID,<b14>>
   AMD Features=3D0x20000000<LM>
   Hyperthreading: 2 logical CPUs
 real memory  =3D 1072562176 (1022 MB)
 avail memory =3D 1044758528 (996 MB)
 ACPI APIC Table: <IntelR AWRDACPI>
 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  6
  cpu3 (AP): APIC ID:  7
 ioapic0: Changing APIC ID to 4
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 ioapic1 <Version 2.0> irqs 24-47 on motherboard
 npx0: [FAST]
 npx0: <math processor> on motherboard
 npx0: INT 16 interface
 acpi0: <IntelR AWRDACPI> on motherboard
 acpi0: Power Button (fixed)
 pci_link0: <ACPI PCI Link LNKA> irq 10 on acpi0
 pci_link1: <ACPI PCI Link LNKB> irq 5 on acpi0
 pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
 pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
 pci_link4: <ACPI PCI Link LNKE> irq 0 on acpi0
 pci_link5: <ACPI PCI Link LNKF> irq 0 on acpi0
 pci_link6: <ACPI PCI Link LNK0> irq 0 on acpi0
 pci_link7: <ACPI PCI Link LNK1> irq 9 on acpi0
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
 cpu0: <ACPI CPU> on acpi0
 cpu1: <ACPI CPU> on acpi0
 cpu2: <ACPI CPU> on acpi0
 cpu3: <ACPI CPU> on acpi0
 acpi_button0: <Power Button> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 em0: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
 0xa000-0xa01f mem 0xf1020000-0xf103ffff,0xf1000000-0xf101ffff irq 18 at
 device 1.0 on pci1
 em0: Ethernet address: 00:11:2f:5a:7e:e7
 em0:  Speed:N/A  Duplex:N/A
 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 uhci0: <UHCI (generic) USB controller> port 0xc400-0xc41f irq 16 at =
 device
 29.0 on pci0
 uhci0: [GIANT-LOCKED]
 usb0: <UHCI (generic) USB controller> on uhci0
 usb0: USB revision 1.0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1: <UHCI (generic) USB controller> port 0xc000-0xc01f irq 19 at =
 device
 29.1 on pci0
 uhci1: [GIANT-LOCKED]
 usb1: <UHCI (generic) USB controller> on uhci1
 usb1: USB revision 1.0
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 pci0: <base peripheral> at device 29.4 (no driver attached)
 pci0: <base peripheral, interrupt controller> at device 29.5 (no driver
 attached)
 pci0: <serial bus, USB> at device 29.7 (no driver attached)
 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci3: <ACPI PCI bus> on pcib3
 pci3: <display, VGA> at device 4.0 (no driver attached)
 em1: <Intel(R) PRO/1000 Network Connection, Version - 2.1.7> port
 0xb400-0xb43f mem 0xf4000000-0xf401ffff,0xf4020000-0xf403ffff irq 16 at
 device 5.0 on pci3
 em1: Ethernet address: 00:11:2f:5a:7e:e8
 em1:  Speed:N/A  Duplex:N/A
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 atapci0: <Intel 6300ESB UDMA100 controller> port
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f at device 31.1 on pci0
 ata0: <ATA channel 0> on atapci0
 ata1: <ATA channel 1> on atapci0
 atapci1: <Intel 6300ESB SATA150 controller> port
 0xc800-0xc807,0xcc00-0xcc03,0xd000-0xd007,0xd400-0xd403,0xd800-0xd80f =
 irq 18
 at device 31.2 on pci0
 atapci1: failed to enable memory mapping!
 ata2: <ATA channel 0> on atapci1
 ata3: <ATA channel 1> on atapci1
 ichsmb0: <Intel 6300ESB (ICH) SMBus controller> port 0x500-0x51f irq 17 =
 at
 device 31.3 on pci0
 ichsmb0: [GIANT-LOCKED]
 smbus0: <System Management Bus> on ichsmb0
 smb0: <SMBus generic I/O> on smbus0
 fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on =
 acpi0
 fdc0: [FAST]
 fd0: <1440-KB 3.5" drive> on fdc0 drive 0
 sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
 acpi0
 sio0: type 16550A
 sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
 sio1: type 16550A
 ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq =
 7 on
 acpi0
 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
 ppbus0: <Parallel port bus> on ppc0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 psm0: [GIANT-LOCKED]
 psm0: model IntelliMouse Explorer, device ID 4
 pmtimer0 on isa0
 orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcc7ff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=3D0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
 isa0
 Timecounters tick every 1.000 msec
 acd0: CDROM <CD-224E/1.9A> at ata0-master UDMA33
 ad4: 238475MB <WDC WD2500JD-00HBB0 08.02D08> at ata2-master SATA150
 ad6: 238475MB <WDC WD2500JD-00HBB0 08.02D08> at ata3-master SATA150
 ar0: 238475MB <Adaptec HostRAID RAID1> status: READY
 ar0: disk0 READY (master) using ad4 at ata2-master
 ar0: disk1 READY (mirror) using ad6 at ata3-master
 SMP: AP CPU #3 Launched!
 SMP: AP CPU #1 Launched!
 SMP: AP CPU #2 Launched!

 -----Original Message-----
 From: Internet Partners, Inc. Tech Support [mailto:support at ipinc.net]=20
 Sent: Tuesday, October 04, 2005 9:04 PM
 To: bug-followup at FreeBSD.org; ksatechnologies at comcast.net
 Subject: Re: kern/74136: FreeBSD 5.3 does not see RAID 1 drive only
 Physical's with 6300ESB

 Hi All,

   Have you tried this with FreeBSD 6.0 beta?  S=F8ren Schmidt apparently =
 added
 support for
 the ICH5R controller RAID recently.

 Ted Mittelstaedt