misc/95993: Cyrix 5530 unable to map interrupt

Tue Apr 18 09:40:37 UTC 2006

>Number:         95993
>Category:       misc
>Synopsis:       Cyrix 5530 unable to map interrupt
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Apr 18 09:40:22 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator:     Kirill Yelizarov
>Release:        FreeBSD 6.0 RELEASE
>Organization:
home
>Environment:
Installed from CD FreeBSD 6.0 RELEASE, I can't run uname because system hangs before login
>Description:
I installed system on another computer and then plugged harddrive to singleplate PC (Advantech). System hangs just after it starts to mount root. I tried with or without ACPI. I managed to start in single mode but system hangs right after i tried to mount filesystem.

Here is dmesg which i managed to get via serial console

Here is part of dmesg with ACPI enabled

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Cyrix GXm (299.24-MHz 586-class CPU)
  Origin = "CyrixInstead"  Id = 0x540  DIR=0x8244  Stepping=8  Revision=2
real memory  = 133169152 (127 MB)
avail memory = 120770560 (115 MB)
    ACPI-0159: *** Error: AcpiLoadTables: Could not get RSDP, AE_NO_ACPI_TABLES
    ACPI-0213: *** Error: AcpiLoadTables: Could not load tables: AE_NO_ACPI_TABLES
ACPI: table load failed: AE_NO_ACPI_TABLES
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 2 Entries> on motherboard
pci0: <PCI bus> on pcib0
the rest is the same as without ACPI

This one without ACPI

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Cyrix GXm (299.24-MHz 586-class CPU)
  Origin = "CyrixInstead"  Id = 0x540  DIR=0x8244  Stepping=8  Revision=2
real memory  = 133169152 (127 MB)
avail memory = 120786944 (115 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 3 Entries> on motherboard
pci0: <PCI bus> on pcib0
fxp0: <Intel 82559ER Embedded 10/100 Ethernet> port 0xe000-0xe03f mem 0xe2040000
-0xe2040fff,0xe2020000-0xe203ffff irq 11 at device 11.0 on pci0
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:0b:ab:06:19:9a
fxp1: <Intel 82559ER Embedded 10/100 Ethernet> port 0xe400-0xe43f mem 0xe2041000
-0xe2041fff,0xe2000000-0xe201ffff irq 10 at device 12.0 on pci0
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:0b:ab:06:19:99
isab0: <PCI-ISA bridge> at device 18.0 on pci0
isa0: <ISA bus> on isab0
pci0: <bridge> at device 18.1 (no driver attached)
atapci0: <Cyrix 5530 ATA33 controller> port 0xf000-0xf00f at device 18.2 on pci0
atapci0: unable to map interrupt
ata2: <ATA channel 0> on atapci0
device_attach: ata2 attach returned 6
pci0: <multimedia, audio> at device 18.3 (no driver attached)
pci0: <display, VGA> at device 18.4 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xe2045000-0xe2045fff irq 11 at devic
e 19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc7fff on isa0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0c01> can't assign resources (memory)
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0400> can't assign resources (port)
unknown: <PNP0501> can't assign resources (port)
Timecounter "TSC" frequency 299237422 Hz quality 800
Timecounters tick every 1.000 msec
ad0: 38154MB <HTS541040G9AT00 MB2OA60A> at ata0-master PIO4
Trying to mount root from ufs:/dev/ad0s2a

I can provide with other information if necessary
>How-To-Repeat:
Single plate PC Advantech PCM-5823-G0A2
FreeBSD 6.0 RELEASE
>Fix:
Not known
>Release-Note:
>Audit-Trail:
>Unformatted: