kern/88859: ACPI broken on Compaq DL360

[Ted Mittelstaedt]

>Number:         88859
>Category:       kern
>Synopsis:       ACPI broken on Compaq DL360
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Fri Nov 11 20:40:18 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Ted Mittelstaedt
>Release:        FreeBSD 6.0-RELEASE i386
>Organization:
Internet Partners, Inc.
>Environment:
System: FreeBSD www.bignow.com 6.0-RELEASE FreeBSD 6.0-RELEASE #0: Thu Nov 3 09:36:13 UTC 2005 root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC i386


	
>Description:

  Machine will not boot unless the following is in /boot/loader.conf

hint.acpi.0.disabled=1

	

  The system is an original Compaq DL360, not the later G1, etc.  It is running BIOS version
P21 dated 11/15/2002 which is the latest version of the BIOS for this system.  I have tried setting
the Operating System type in the BIOS configuration to UNIX/LINUX and OTHER with no effect.

  There is only 1 CPU installed in this system.

  When ACPI is enabled the system halts during boot with the following message:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (996.85-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073725440 (1023 MB)
avail memory = 1041846272 (993 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <COMPAQ MICRO> on motherboard
acpi0: Power Button (fixed)
pci_link0: <ACPI PCI Link FAKE> on acpi0
pci_link1: <ACPI PCI Link INA0> on acpi0

and it prints nothing further.

Here is a dmesg output from when the system is booted with acpi disabled:

Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.0-RELEASE #0: Thu Nov  3 09:36:13 UTC 2005
    root at x64.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (996.85-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x68a  Stepping = 10
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 1073725440 (1023 MB)
avail memory = 1041846272 (993 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
cpu0 on motherboard
pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
ida0: <Compaq Integrated Array controller> port 0x2000-0x20ff mem 0xc5000000-0xc5ffffff,0xc4000000-0xc4ffffff irq 3 at device 1.0 on pci0
ida0: [GIANT-LOCKED]
ida0: drives=1 firm_rev=1.50
idad0: <Compaq Logical Drive> on ida0
idad0: 70001MB (143363040 sectors), blocksize=512
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <base peripheral> at device 4.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <ServerWorks ROSB4 UDMA33 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2800-0x280f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pcib3: <ServerWorks NB6635 3.0LE host to PCI bridge> pcibus 3 on motherboard
pci3: <PCI bus> on pcib3
fxp0: <Intel 82559 Pro/100 Ethernet> port 0x3000-0x303f mem 0xc6fff000-0xc6ffffff,0xc6e00000-0xc6efffff irq 5 at device 4.0 on pci3
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: Ethernet address: 00:50:8b:e0:4b:77
fxp1: <Intel 82559 Pro/100 Ethernet> port 0x3040-0x307f mem 0xc6dff000-0xc6dfffff,0xc6c00000-0xc6cfffff irq 7 at device 5.0 on pci3
miibus1: <MII bus> on fxp1
inphy1: <i82555 10/100 media interface> on miibus1
inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1: Ethernet address: 00:50:8b:e0:4b:74
eisa0: <EISA bus> on motherboard
mainboard0: <CPQ0685 (System Board)> on eisa0 slot 0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xcbfff,0xe8000-0xedfff,0xee000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 996848440 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <CD-224E/9.0B> at ata1-master PIO4
Trying to mount root from ufs:/dev/idad0s1a


>How-To-Repeat:
	
>Fix:

Disable ACPI

	


>Release-Note:
>Audit-Trail:
>Unformatted: