misc/74066: acd driver fault: READ_BIG timeout

[Vlad Manilici]

>Number:         74066
>Category:       misc
>Synopsis:       acd driver fault: READ_BIG timeout
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Nov 18 10:50:27 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator:     Vlad Manilici
>Release:        5.3
>Organization:
>Environment:
FreeBSD fx.homeunix.org 5.3-STABLE FreeBSD 5.3-STABLE #5: Sun Nov 14 17:27:38 CET 2004     root at fx.homeunix.org:/usr/obj/usr/src/sys/FX  i386
>Description:
when mounting a CD, the following error is output:

% grep READ_BIG /var/log/messages
Nov 15 13:18:24 fx kernel: acd0: TIMEOUT - READ_BIG retrying (2 retries left)
Nov 15 13:18:24 fx kernel: acd0: FAILURE - READ_BIG timed out
Nov 15 13:18:54 fx kernel: acd0: TIMEOUT - READ_BIG retrying (2 retries left)

please do not dismiss this as a hardware error: 5.2.1 works perfectly on
the same machine.

% dmesg

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.3-STABLE #5: Sun Nov 14 17:27:38 CET 2004
    root at fx.homeunix.org:/usr/obj/usr/src/sys/FX
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Mobile Intel(R) Celeron(R) CPU 2.20GHz (2193.09-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf29  Stepping = 9
  Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,
HTT,TM,PBE>
real memory  = 251068416 (239 MB)
avail memory = 240152576 (229 MB)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP-1S> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1c, ECDT> port 0x66,0x62 on acpi0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (3 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 5.0 (no driver attached)
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe8010000-0xe8010fff irq 11 at device 2.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <simple comms> at device 3.0 (no driver attached)
pcm0: <Acer Labs M5451> port 0x8800-0x88ff mem 0xe8012000-0xe8012fff irq 11 at device 4.0 on pci0
pcm0: <Analog Devices AD1981B AC97 Codec>
pcm0: [GIANT-LOCKED]
pci0: <bridge, PCI-unknown> at device 6.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
bge0: <Broadcom BCM5901 Fast Ethernet, ASIC rev. 0x3001> mem 0xe8000000-0xe800ffff irq 11 at device 11.0 on pci0
miibus0: <MII bus> on bge0
brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDXauto
bge0: Ethernet address: 00:06:1b:df:87:b9
cbb0: <TI1510 PCI-CardBus Bridge> mem 0xb0000000-0xb0000fff irq 11 at device 12.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x8080-0x808f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
ppc0: <Standard parallel printer port> port 0x3bc-0x3be irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROMs> at iomem 0xdc000-0xdffff,0xce800-0xcf7ff,0xcd000-0xce7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <10 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 2193094960 Hz quality 800
Timecounters tick every 1.000 msec
ipfw2 initialized, divert disabled, rule-based forwarding disabled, default to deny, logging unlimited
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ad0: 28615MB <IC25N030ATMR04-0/MOAOAD4A> [62016/15/63] at ata0-master UDMA100
acd0: CDRW <DW-224E/B.2A> at ata1-master UDMA33
Mounting root from ufs:/dev/ad0s1a
wi0: <NETGEAR MA401RA Wireless PC Card> at port 0x100-0x13f irq 11 function 0 config 1 on pccard0
wi0: using RF:PRISM2.5 MAC:ISL3873
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: Ethernet address: 00:09:5b:55:00:e9
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps

>How-To-Repeat:

>Fix:
unknown
>Release-Note:
>Audit-Trail:
>Unformatted: