kern/69752: LOR in sk(4) when booting
Maxim Maximov
mcsi at mcsi.pp.ru
Thu Jul 29 02:00:56 PDT 2004
>Number: 69752
>Category: kern
>Synopsis: LOR in sk(4) when booting
>Confidential: no
>Severity: non-critical
>Priority: low
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Thu Jul 29 09:00:37 GMT 2004
>Closed-Date:
>Last-Modified:
>Originator: Maxim Maximov
>Release: 5.2-CURRENT
>Organization:
>Environment:
# uname -a
FreeBSD 5.2-CURRENT FreeBSD 5.2-CURRENT #15: Thu Jul 29 12:08:34 MSD 2004 mcsi at ultra.domain:/usr/obj/usr/src/sys/ULTRA i386
>Description:
/boot/kernel/acpi.ko text=0x3f4b8 data=0x1a84+0xe2c syms=[0x4+0x6fd0+0x4+0x9132]
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #15: Thu Jul 29 12:08:34 MSD 2004
mcsi at ultra.domain:/usr/obj/usr/src/sys/ULTRA
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: Kernel preemption is disabled, expect reduced performance.
ACPI APIC Table: <A M I OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (2992.51-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,
HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory = 536674304 (511 MB)
avail memory = 514596864 (490 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <A M I OEMRSDT> on motherboard
acpi0: [GIANT-LOCKED]
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x66,0x62 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
cpu1: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xe000-0xe01f irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xe400-0xe41f irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech Optical USB Mouse, rev 2.00/3.40, addr 2, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xe800-0xe81f irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xec00-0xec1f irq 16 at device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
skc0: <3Com 3C940 Gigabit Ethernet> port 0xa800-0xa8ff mem 0xfeafc000-0xfeafffff irq 18 at device 0.0 on pci2
skc0: 3Com Gigabit LOM (3C940)
sk0: <Marvell Semiconductor, Inc. Yukon> on skc0
malloc(M_WAITOK) of "512", forcing M_NOWAIT with the following non-sleepable locks held:
exclusive sleep mutex skc0 (network driver) r = 0 (0xc1b86ec0) locked @ /usr/src/sys/pci/if_sk.c:1335
KDB: stack backtrace:
kdb_backtrace(1,1,1,110,c112d9a0) at kdb_backtrace+0x29
witness_warn(5,0,c0829130,c07e537c) at witness_warn+0x19a
uma_zalloc_arg(c112d9a0,0,102) at uma_zalloc_arg+0x38
malloc(110,c0878c00,102,38,c1bc3000) at malloc+0xae
if_attach(c1bc3000,c1bc3000,0,c0c219d8,c07188d6) at if_attach+0x20e
ether_ifattach(c1bc3000,c1bc3224,c1bc3260,c1bc3000,c1afd46c,0) at ether_ifattach+0x1d
sk_attach(c1ba2000) at sk_attach+0x30a
device_attach(c1ba2000,c1b86680,c1ba2000,c1b86e80,c1b86780) at device_attach+0x58
device_probe_and_attach(c1ba2000) at device_probe_and_attach+0xb4
bus_generic_attach(c1b86780,0,1700,0,c1b86780) at bus_generic_attach+0x16
skc_attach(c1b86780) at skc_attach+0x3ce
device_attach(c1b86780,c1a4ec00,c1b86780,c1b86680,c1b86680) at device_attach+0x58
device_probe_and_attach(c1b86780) at device_probe_and_attach+0xb4
bus_generic_attach(c1b86680,6,c1a4ec00,1,c0a26154) at bus_generic_attach+0x16
acpi_pci_attach(c1b86680) at acpi_pci_attach+0xec
device_attach(c1b86680,c1b80780,c1b86680,c1b86280,0) at device_attach+0x58
device_probe_and_attach(c1b86680) at device_probe_and_attach+0xb4
bus_generic_attach(c1b86280,c1b86280,c1bb4f70,2,c0a25dcd) at bus_generic_attach+0x16
acpi_pcib_attach(c1b86280,c1bb4f70,2,c1b86280,c1a4ec00) at acpi_pcib_attach+0x14e
acpi_pcib_pci_attach(c1b86280) at acpi_pcib_pci_attach+0x88
device_attach(c1b86280,c1b86100,c1b86280,c1b80780,c1b80780) at device_attach+0x58
device_probe_and_attach(c1b86280) at device_probe_and_attach+0xb4
bus_generic_attach(c1b80780,6,c1a42480,1,c0a26154) at bus_generic_attach+0x16
acpi_pci_attach(c1b80780) at acpi_pci_attach+0xec
device_attach(c1b80780,c1b62800,c1b80780,c1aaac00,0) at device_attach+0x58
device_probe_and_attach(c1b80780) at device_probe_and_attach+0xb4
bus_generic_attach(c1aaac00,c1aaac00,c1b72f14,0,0) at bus_generic_attach+0x16
acpi_pcib_attach(c1aaac00,c1b72f14,0,c0c21c5c,c0654ca0) at acpi_pcib_attach+0x14e
acpi_pcib_acpi_attach(c1aaac00) at acpi_pcib_acpi_attach+0x20a
device_attach(c1aaac00,c0a3c948,c1aaac00,c1b62800,0) at device_attach+0x58
device_probe_and_attach(c1aaac00) at device_probe_and_attach+0xb4
bus_generic_attach(c1b62800,c1b62800,c1a42e40,1,c1b62780) at bus_generic_attach+0x16
acpi_probe_children(c1b62800,1acb0,c1b62800,c1b62800,0) at acpi_probe_children+0x63
acpi_attach(c1b62800) at acpi_attach+0x52b
device_attach(c1b62800,c0a3bae0,c1b62800,c1b62980,0) at device_attach+0x58
device_probe_and_attach(c1b62800) at device_probe_and_attach+0xb4
bus_generic_attach(c1b62980,c1b62980,c1b62980,c0c21d44,c06510a0) at bus_generic_attach+0x16
nexus_attach(c1b62980) at nexus_attach+0x13
device_attach(c1b62980,c08a8410,c1b62980,c08a8410,c29000) at device_attach+0x58
device_probe_and_attach(c1b62980) at device_probe_and_attach+0xb4
root_bus_configure(c1a55800,c082ebe3,0) at root_bus_configure+0x16
configure(0,c1ec00,c1e000,0,c0443195) at configure+0x1b
mi_startup() at mi_startup+0x96
begin() at begin+0x2c
sk0: Ethernet address: 00:0e:a6:b9:f9:f8
.. many-many KB of the same messages skipped
e1000phy0: <Marvell 88E1000 Gigabit PHY> on miibus0
lock order reversal
1st 0xc1b86ec0 skc0 (network driver) @ /usr/src/sys/pci/if_sk.c:673
2nd 0xc08d4b20 kernel environment (kernel environment) @ /usr/src/sys/kern/kern_environment.c:285
KDB: stack backtrace:
kdb_backtrace(0,ffffffff,c08e1998,c08e2320,c0871858) at kdb_backtrace+0x29
witness_checkorder(c08d4b20,1,c080fb0c,11d) at witness_checkorder+0x544
_sx_slock(c08d4b20,c080fb0c,11d,c0c21878,a) at _sx_slock+0x50
getenv(c07f5f5e,c1bc7170,c1ba2700,c1ba2700,0) at getenv+0x2f
getenv_quad(c07f5f5e,c0c218b8,c083acb0,c083acb0,c0c218e0) at getenv_quad+0x11
getenv_int(c07f5f5e,c08cb0e8,c083acb0,c1ba2700,c1ba2700) at getenv_int+0x12
e1000phy_attach(c1ba2700) at e1000phy_attach+0x18
device_attach(c1ba2700,c0651a34,c1ba2700,c1bb4380,0) at device_attach+0x58
device_probe_and_attach(c1ba2700) at device_probe_and_attach+0xb4
bus_generic_attach(c1ba2380,c1bb4380,f0000000,c0718104,c0718134) at bus_generic_attach+0x16
miibus_attach(c1ba2380) at miibus_attach+0x3d
device_attach(c1ba2380,c0716fcc,c1ba2380,0,c1ba2000) at device_attach+0x58
device_probe_and_attach(c1ba2380) at device_probe_and_attach+0xb4
bus_generic_attach(c1ba2000,c1bc3000,0,c1bc3000,c0c219d8) at bus_generic_attach+0x16
mii_phy_probe(c1ba2000,c1bc3234,c0718104,c0718134) at mii_phy_probe+0xd4
sk_attach(c1ba2000) at sk_attach+0x34c
device_attach(c1ba2000,c1b86680,c1ba2000,c1b86e80,c1b86780) at device_attach+0x58
device_probe_and_attach(c1ba2000) at device_probe_and_attach+0xb4
bus_generic_attach(c1b86780,0,1700,0,c1b86780) at bus_generic_attach+0x16
skc_attach(c1b86780) at skc_attach+0x3ce
device_attach(c1b86780,c1a4ec00,c1b86780,c1b86680,c1b86680) at device_attach+0x58
device_probe_and_attach(c1b86780) at device_probe_and_attach+0xb4
bus_generic_attach(c1b86680,6,c1a4ec00,1,c0a26154) at bus_generic_attach+0x16
acpi_pci_attach(c1b86680) at acpi_pci_attach+0xec
device_attach(c1b86680,c1b80780,c1b86680,c1b86280,0) at device_attach+0x58
device_probe_and_attach(c1b86680) at device_probe_and_attach+0xb4
bus_generic_attach(c1b86280,c1b86280,c1bb4f70,2,c0a25dcd) at bus_generic_attach+0x16
acpi_pcib_attach(c1b86280,c1bb4f70,2,c1b86280,c1a4ec00) at acpi_pcib_attach+0x14e
acpi_pcib_pci_attach(c1b86280) at acpi_pcib_pci_attach+0x88
device_attach(c1b86280,c1b86100,c1b86280,c1b80780,c1b80780) at device_attach+0x58
device_probe_and_attach(c1b86280) at device_probe_and_attach+0xb4
bus_generic_attach(c1b80780,6,c1a42480,1,c0a26154) at bus_generic_attach+0x16
acpi_pci_attach(c1b80780) at acpi_pci_attach+0xec
device_attach(c1b80780,c1b62800,c1b80780,c1aaac00,0) at device_attach+0x58
device_probe_and_attach(c1b80780) at device_probe_and_attach+0xb4
bus_generic_attach(c1aaac00,c1aaac00,c1b72f14,0,0) at bus_generic_attach+0x16
acpi_pcib_attach(c1aaac00,c1b72f14,0,c0c21c5c,c0654ca0) at acpi_pcib_attach+0x14e
acpi_pcib_acpi_attach(c1aaac00) at acpi_pcib_acpi_attach+0x20a
device_attach(c1aaac00,c0a3c948,c1aaac00,c1b62800,0) at device_attach+0x58
device_probe_and_attach(c1aaac00) at device_probe_and_attach+0xb4
bus_generic_attach(c1b62800,c1b62800,c1a42e40,1,c1b62780) at bus_generic_attach+0x16
acpi_probe_children(c1b62800,1acb0,c1b62800,c1b62800,0) at acpi_probe_children+0x63
acpi_attach(c1b62800) at acpi_attach+0x52b
device_attach(c1b62800,c0a3bae0,c1b62800,c1b62980,0) at device_attach+0x58
device_probe_and_attach(c1b62800) at device_probe_and_attach+0xb4
bus_generic_attach(c1b62980,c1b62980,c1b62980,c0c21d44,c06510a0) at bus_generic_attach+0x16
nexus_attach(c1b62980) at nexus_attach+0x13
device_attach(c1b62980,c08a8410,c1b62980,c08a8410,c29000) at device_attach+0x58
device_probe_and_attach(c1b62980) at device_probe_and_attach+0xb4
root_bus_configure(c1a55800,c082ebe3,0) at root_bus_configure+0x16
configure(0,c1ec00,c1e000,0,c0443195) at configure+0x1b
mi_startup() at mi_startup+0x96
begin() at begin+0x2c
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX-FDX, auto
skc0: [GIANT-LOCKED]
cbb0: <RF5C476 PCI-CardBus Bridge> irq 16 at device 1.0 on pci2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <RF5C476 PCI-CardBus Bridge> irq 17 at device 1.1 on pci2
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
fwohci0: <Ricoh R5C552> mem 0xfeafb000-0xfeafb7ff irq 18 at device 1.2 on pci2
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:18:00:03:18:f3:bc
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:e0:18:18:f3:bc
fwe0: Ethernet address: 02:e0:18:18:f3:bc
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pci2: <base peripheral> at device 1.3 (no driver attached)
pci2: <base peripheral> at device 1.4 (no driver attached)
pci2: <network> at device 2.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 UDMA100 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel ICH5 (82801EB)> port 0xd000-0xd03f,0xd400-0xd4ff mem 0xfebff400-0xfebff4ff,0xfebff800-0xfebff9ff irq 17 at device 31.5
on pci0
pcm0: [GIANT-LOCKED]
pcm0: <Avance Logic ALC650 AC97 Codec>
pci0: <simple comms> at device 31.6 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcffff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
ATAPI_RESET time = 100us
acd0: DVDR <TOSHIBA DVD-ROM SD-R6112> at ata0-slave PIO4
ad2: 57231MB <IC25N060ATMR04-0> [116280/16/63] at ata1-master UDMA100
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad2s3a
Kernel config follows:
machine i386
cpu I486_CPU
cpu I586_CPU
cpu I686_CPU
ident GENERIC
# To statically compile in device wiring instead of /boot/device.hints
#hints "GENERIC.hints" # Default places to look for devices.
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols
options SCHED_ULE # ULE scheduler
options INET # InterNETworking
#options INET6 # IPv6 communications protocols
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options MD_ROOT # MD is a potential root device
options NFSCLIENT # Network Filesystem Client
options NFSSERVER # Network Filesystem Server
options NFS_ROOT # NFS usable as /, requires NFSCLIENT
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_GPT # GUID Partition Tables.
options COMPAT_43 # Compatible with BSD 4.3 [KEEP THIS!]
options COMPAT_FREEBSD4 # Compatible with FreeBSD4
options SCSI_DELAY=15000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
options PFIL_HOOKS # pfil(9) framework
# Debugging for use in -current
options KDB # Enable kernel debugger support.
options DDB # Support DDB.
options GDB # Support remote GDB.
options INVARIANTS # Enable calls of extra sanity checking
options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
options WITNESS # Enable checks to detect deadlocks and cycles
options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
# To make an SMP kernel, the next two are needed
options SMP # Symmetric MultiProcessor Kernel
device apic # I/O APIC
# Bus support. Do not remove isa, even if you have no isa slots
device isa
device eisa
device pci
# Floppy drives
device fdc
# ATA and ATAPI devices
device ata
device atadisk # ATA disk drives
device ataraid # ATA RAID drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID # Static device numbering
# SCSI Controllers
device ahb # EISA AHA1742 family
device ahc # AHA2940 and onboard AIC7xxx devices
device ahd # AHA39320/29320 and onboard AIC79xx devices
device amd # AMD 53C974 (Tekram DC-390(T))
device isp # Qlogic family
device mpt # LSI-Logic MPT-Fusion
#device ncr # NCR/Symbios Logic
device sym # NCR/Symbios Logic (newer chipsets + those of `ncr')
device trm # Tekram DC395U/UW/F DC315U adapters
device adv # Advansys SCSI adapters
device adw # Advansys wide SCSI adapters
device aha # Adaptec 154x SCSI adapters
device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
device bt # Buslogic/Mylex MultiMaster SCSI adapters
device ncv # NCR 53C500
device nsp # Workbit Ninja SCSI-3
device stg # TMC 18C30/18C50
# SCSI peripherals
device scbus # SCSI bus (required for SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct SCSI access)
device ses # SCSI Environmental Services (and SAF-TE)
# RAID controllers interfaced to the SCSI subsystem
device amr # AMI MegaRAID
device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
device ciss # Compaq Smart RAID 5*
device dpt # DPT Smartcache III, IV - See NOTES for options
device iir # Intel Integrated RAID
device ips # IBM (Adaptec) ServeRAID
device mly # Mylex AcceleRAID/eXtremeRAID
device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
device aac # Adaptec FSA RAID
device aacp # SCSI passthrough for aac (requires CAM)
device ida # Compaq Smart RAID
device mlx # Mylex DAC960 family
device pst # Promise Supertrak SX6000
device twe # 3ware ATA RAID
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc # AT keyboard controller
device atkbd # AT keyboard
device psm # PS/2 mouse
device vga # VGA video card driver
device splash # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device sc
# Enable this for the pcvt (VT220 compatible) console driver
#device vt
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx
# Power management support (see NOTES for more options)
device apm
# Add suspend/resume support for the i8254.
device pmtimer
# PCCARD (PCMCIA) support
# PCMCIA and cardbus bridge support
device cbb # cardbus (yenta) bridge
#device pcic # ExCA ISA and PCI bridges
device pccard # PC Card (16-bit) bus
device cardbus # CardBus (32-bit) bus
# Serial (COM) ports
device sio # 8250, 16[45]50 based serial ports
# Parallel port
device ppc
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# If you've got a "dumb" serial or parallel PCI card that is
# supported by the puc(4) glue driver, uncomment the following
# line to enable it (connects to the sio and/or ppc drivers):
#device puc
# PCI Ethernet NICs.
device de # DEC/Intel DC21x4x (``Tulip'')
device em # Intel PRO/1000 adapter Gigabit Ethernet Card
device ixgb # Intel PRO/10GbE Ethernet Card
device txp # 3Com 3cR990 (``Typhoon'')
device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device miibus # MII bus support
device bfe # Broadcom BCM440x 10/100 Ethernet
device bge # Broadcom BCM570xx Gigabit Ethernet
device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc')
device re # RealTek 8139C+/8169/8169S/8110S
device rl # RealTek 8129/8139
device sf # Adaptec AIC-6915 (``Starfire'')
device sis # Silicon Integrated Systems SiS 900/SiS 7016
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
device ste # Sundance ST201 (D-Link DFE-550TX)
device ti # Alteon Networks Tigon I/II gigabit Ethernet
device tl # Texas Instruments ThunderLAN
device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
device wb # Winbond W89C840F
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# ISA Ethernet NICs. pccard NICs included.
device cs # Crystal Semiconductor CS89x0 NIC
# 'device ed' requires 'device miibus'
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
device ex # Intel EtherExpress Pro/10 and Pro/10+
device ep # Etherlink III based cards
device fe # Fujitsu MB8696x based cards
device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc.
device lnc # NE2100, NE32-VL Lance Ethernet cards
device sn # SMC's 9000 series of Ethernet chips
device xe # Xircom pccard Ethernet
# ISA devices that use the old ISA shims
#device le
# Wireless NIC cards
device wlan # 802.11 support
device an # Aironet 4500/4800 802.11 wireless NICs.
device awi # BayStack 660 and others
device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs.
#device wl # Older non 802.11 Wavelan wireless NIC.
# Pseudo devices - the number indicates how many units to allocate.
device random # Entropy device
device loop # Network loopback
device ether # Ethernet support
device sl # Kernel SLIP
device ppp # Kernel PPP
device tun # Packet tunnel.
device pty # Pseudo-ttys (telnet etc)
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device faith # IPv6-to-IPv4 relaying (translation)
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
device bpf # Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and da)
device fwe # Ethernet over FireWire (non-standard!)
######
device pf
device pflog
options ALTQ
options ALTQ_CBQ # Class Bases Queueing
options ALTQ_RED # Random Early Drop
options ALTQ_RIO # RED In/Out
options ALTQ_HFSC # Hierarchical Packet Scheduler
options ALTQ_CDNR # Traffic conditioner
options ALTQ_PRIQ # Priority Queueing
options ALTQ_NOPCC # Required for SMP build
options ALTQ_DEBUG
device radeondrm
device acpi_asus
device sound
device snd_ich
options ALT_BREAK_TO_DEBUGGER
options MSGBUF_SIZE=1048576
options CONSPEED=115200
>How-To-Repeat:
Boot CURRENT on ASUS L5F00Ga
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list