kern/61370: System hangs during boot with ATAPICAM
Kevin Oberman
oberman at es.net
Wed Jan 14 14:00:38 PST 2004
>Number: 61370
>Category: kern
>Synopsis: System hangs during boot with ATAPICAM
>Confidential: no
>Severity: serious
>Priority: medium
>Responsible: freebsd-bugs
>State: open
>Quarter:
>Keywords:
>Date-Required:
>Class: sw-bug
>Submitter-Id: current-users
>Arrival-Date: Wed Jan 14 14:00:32 PST 2004
>Closed-Date:
>Last-Modified:
>Originator: Kevin Oberman
>Release: FreeBSD 5.2-CURRENT i386
>Organization:
ESnet-THe Energy Sciences Network
>Environment:
System: FreeBSD kzin.es.net 5.2-CURRENT FreeBSD 5.2-CURRENT #19: Tue Jan 13 06:09:09 PST 2004 root at kzin.es.net:/usr/obj/usr/src/sys/KZIN i386
>Description:
When I boot a system with a recent kernel, it hangs during
device probe on the ata1 slave device.
I have an ASUS P5A mobo with MAD K6-3 CPU. Everything boots if I
remove ATAPICAM from the kernel.
A verbose boot of the current kernel follows:
SMAP type=01 base=0000000000000000 len=000000000009fc00
SMAP type=02 base=000000000009fc00 len=0000000000000400
SMAP type=02 base=00000000000f0000 len=0000000000010000
SMAP type=01 base=0000000000100000 len=0000000005efc000
SMAP type=03 base=0000000005ffc000 len=0000000000003000
SMAP type=04 base=0000000005fff000 len=0000000000001000
SMAP type=02 base=00000000ffff0000 len=0000000000010000
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #16: Sat Dec 27 13:04:46 PST 2003
oberman at kzin.es.net:/usr/obj/usr/src/sys/KZIN
Preloaded elf kernel "/boot/kernel/kernel.cam" at 0xc081e000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc081e208.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc081e258.
Calibrating clock(s) ... i8254 clock: 1193208 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 451024062 Hz
CPU: AMD-K6(tm) 3D+ Processor (451.02-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x591 Stepping = 1
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
Data TLB: 128 entries, 2-way associative
Instruction TLB: 64 entries, 1-way associative
L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative
L2 internal cache: 256 kbytes, 32 bytes/line, 2 lines/tag, 4-way associative
Write Allocate Enable Limit: 96M bytes
Write Allocate 15-16M bytes: Enable
real memory = 100646912 (95 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x0000000005e23fff, 85975040 bytes (20990 pages)
avail memory = 88760320 (84 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f9d50
bios32: Entry = 0xf0690 (c00f0690) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x6c0
pnpbios: Found PnP BIOS data at 0xc00fd1d0
pnpbios: Entry = f0000:d200 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
K6-family MTRR support enabled (2 registers)
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P5A > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=154110b9)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00f0ca0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 12 A 0x01 3 4 5 7 9 10 11 12
slot 1 0 12 B 0x02 3 4 5 7 9 10 11 12
slot 1 0 12 C 0x03 3 4 5 7 9 10 11 12
slot 1 0 12 D 0x04 3 4 5 7 9 10 11 12
slot 2 0 11 A 0x02 3 4 5 7 9 10 11 12
slot 2 0 11 B 0x03 3 4 5 7 9 10 11 12
slot 2 0 11 C 0x04 3 4 5 7 9 10 11 12
slot 2 0 11 D 0x01 3 4 5 7 9 10 11 12
slot 3 0 10 A 0x03 3 4 5 7 9 10 11 12
slot 3 0 10 B 0x04 3 4 5 7 9 10 11 12
slot 3 0 10 C 0x01 3 4 5 7 9 10 11 12
slot 3 0 10 D 0x02 3 4 5 7 9 10 11 12
slot 4 0 9 A 0x04 3 4 5 7 9 10 11 12
slot 4 0 9 B 0x01 3 4 5 7 9 10 11 12
slot 4 0 9 C 0x02 3 4 5 7 9 10 11 12
slot 4 0 9 D 0x03 3 4 5 7 9 10 11 12
slot 5 0 13 A 0x04 3 4 5 7 9 10 11 12
slot 5 0 13 B 0x01 3 4 5 7 9 10 11 12
slot 5 0 13 C 0x02 3 4 5 7 9 10 11 12
slot 5 0 13 D 0x03 3 4 5 7 9 10 11 12
embedded 0 2 A 0x59 3 4 5 7 9 10 11 12
embedded 0 1 A 0x01 3 4 5 7 9 10 11 12
embedded 0 1 B 0x02 3 4 5 7 9 10 11 12
embedded 0 1 C 0x03 3 4 5 7 9 10 11 12
embedded 0 1 D 0x04 3 4 5 7 9 10 11 12
embedded 0 6 A 0x03 3 4 5 7 9 10 11 12
embedded 0 6 B 0x04 3 4 5 7 9 10 11 12
embedded 0 6 C 0x01 3 4 5 7 9 10 11 12
embedded 0 6 D 0x02 3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 3, max = 13, width = 10
ACPI timer looks BAD min = 3, max = 8, width = 5
ACPI timer looks BAD min = 3, max = 8, width = 5
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks BAD min = 5, max = 16777213, width = 16777208
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks BAD min = 2, max = 16777191, width = 16777189
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks BAD min = 5, max = 16777206, width = 16777201
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xec08-0xec0b on acpi0
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
acpi_cpu0: <CPU> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.1
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.2
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.3
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.1
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.2
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.3
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.0
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.2
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.3
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.1\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.2\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.3
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.2
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.3
\_SB_.LNKE irq 0: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.2\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.3
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.1\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.2
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.3
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.2\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.3---- before setting priority for links ------------
\_SB_.LNKE:
interrupts: 1 3 4 5 6 7 9 10 11 12 14 15
penalty: 100110 1110 1110 910 1810 1110 110 910 910 1110 10110 10110
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\_SB_.LNKE:
interrupts: 1 3 4 5 6 7 9 10 11 12 14 15
penalty: 100110 1110 1110 910 1810 1110 110 910 910 1110 10110 10110
references: 1
priority: 10785
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.0
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.1
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.2
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.3
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.1
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.2
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.3
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.0
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.2
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.3
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.1\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.2\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.3
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.1
\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.2
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.13.3
\_SB_.LNKE irq 9: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.0
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.1\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.2\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.2.3
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.1\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.2
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.3
\_SB_.LNKC irq 5: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.0
\_SB_.LNKD irq 6: [ 1 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.1
\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.2\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.6.3pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base e0000000, size 26, enabled
found-> vendor=0x10b9, dev=0x1541, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2410, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10b9, dev=0x5243, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0400, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=3, func=0
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x10b9, dev=0x1533, revid=0xc3
bus=0, slot=7, func=0
class=06-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x000f, statreg=0x3200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000d800, size 6, enabled
pcib0: matched entry for 0.9.INTA (source \_SB_.LNKD)
pcib0: slot 9 INTA is routed to irq 6
found-> vendor=0x1274, dev=0x1371, revid=0x08
bus=0, slot=9, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0c (3000 ns), maxlat=0x80 (32000 ns)
intpin=a, irq=6
powerspec 1 supports D0 D2 D3 current D3
map[10]: type 4, range 32, base 0000d400, size 7, enabled
map[14]: type 1, range 32, base de000000, size 7, enabled
pcib0: matched entry for 0.11.INTA (source \_SB_.LNKB)
pcib0: slot 11 INTA is routed to irq 10
found-> vendor=0x10b7, dev=0x9055, revid=0x30
bus=0, slot=11, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x0a (2500 ns)
intpin=a, irq=10
powerspec 1 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 0000d000, size 4, enabled
found-> vendor=0x10b9, dev=0x5229, revid=0xc1
bus=0, slot=15, func=0
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=255
agp0: <Ali M1541 host to AGP bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 64M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xdf000000-0xdfffffff
pcib1: prefetched decode 0xe5f00000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base e6000000, size 25, enabled
map[14]: type 1, range 32, base df800000, size 14, enabled
map[18]: type 1, range 32, base df000000, size 23, enabled
pcib0: matched entry for 0.1.INTA (source \_SB_.LNKA)
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x102b, dev=0x0525, revid=0x04
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x10 (4000 ns), maxlat=0x20 (8000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <bridge, PCI-unknown> at device 3.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pcm0: <AudioPCI ES1373-8> port 0xd800-0xd83f irq 6 at device 9.0 on pci0
pcm0: <Cirrus Logic CS4297A AC97 Codec (id = 0x43525913)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement
pcm0: Primary codec extended features AMAP
pcm0: sndbuf_setmap 182000, 1000; 0xc1c0e000 -> 182000
pcm0: sndbuf_setmap 1c4000, 1000; 0xc1c10000 -> 1c4000
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xd400-0xd47f mem 0xde000000-0xde00007f irq 10 at device 11.0 on pci0
xl0: using memory mapped I/O
xl0: Ethernet address: 00:50:da:80:4b:43
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: bpf attached
atapci0: <AcerLabs Aladdin UDMA33 controller> port 0xd000-0xd00f at device 15.0 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=50
ata1-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=50 stat1=00 devices=0x9<ATAPI_SLAVE,ATA_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
mss_probe: no address given, try 0x530
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/7 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 00 00 64
psm: status 00 03 64
psm: status 00 03 64
psm: data 08 00 00
psm: status 10 00 64
psm: status 00 02 64
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
mss_detect, busy still set (0xff)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: cannot reserve I/O port range (6 ports)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 451024062 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: setting PIO4 on AcerLabs Aladdin chip
ata0-master: setting UDMA33 on AcerLabs Aladdin chip
GEOM: create disk ad0 dp=0xc1c54b60
ad0: <FUJITSU MPE3136AT/ED-90-06> ATA-4 disk at ata0-master
ad0: 13031MB (26688576 sectors), 26476 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ata1-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/15/63 s:63 l:26687745
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 13664125440 end 13664157695
ata1-master: setting PIO4 on AcerLabs Aladdin chip
ata1-master: setting UDMA33 on AcerLabs Aladdin chip
ata1-slave: setting PIO4 on AcerLabs Aladdin chip
ata1-slave: setting UDMA33 on AcerLabs Aladdin chip
GEOM: create disk ad2 dp=0xc1c5dc60
ad2: <Maxtor 91366U4/RA530JN0> ATA-5 disk at ata1-master
ad2: 13029MB (26684784 sectors), 26473 C, 16 H, 63 S, 512 B
ad2: 16 secs/int, 1 depth queue, UDMA33
GEOM: Configure ad0s1a, start 0 length 104857600 end 104857599
GEOM: Configure ad0s1b, start 104857600 length 213909504 end 318767103
GEOM: Configure ad0s1c, start 0 length 13662577152 end 13662577151
GEOM: Configure ad0s1e, start 318767104 length 5242880000 end 5561647103
GEOM: Configure ad0s1f, start 5561647104 length 8100930048 end 13662577151
GEOM: new disk ad2
acd0: <SONY CD-ROM CDU4821/S0.M> CDROM drive at ata1 as slave
acd0: 128KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe2:ata1:0:0:0): error 22
(probe2:ata1:0:0:0): Unretryable Error
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
[0] f:00 typ:165 s(CHS):0/1/1 e(CHS):872/15/63 s:63 l:26684721
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad2s1, start 32256 length 13662577152 end 13662609407
(probe3:ata1:0:1:0): Retrying Command
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
(probe1:ata0:0:1:0): error 22
(probe1:ata0:0:1:0): Unretryable Error
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
GEOM: Configure ad2s1a, start 0 length 104857600 end 104857599
GEOM: Configure ad2s1b, start 104857600 length 213909504 end 318767103
GEOM: Configure ad2s1c, start 0 length 13662577152 end 13662577151
GEOM: Configure ad2s1e, start 318767104 length 5242880000 end 5561647103
GEOM: Configure ad2s1f, start 5561647104 length 8100930048 end 13662577151
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
(probe3:ata1:0:1:0): Retrying Command
>How-To-Repeat:
Boot the system with ATAPICAM in the kernel
>Fix:
Not known
>Release-Note:
>Audit-Trail:
>Unformatted:
More information about the freebsd-bugs
mailing list