kern/68351: bge0 watchdog timeout on 5.2.1 and -current, 5.1 is ok

[John Baldwin]

The following reply was made to PR kern/68351; it has been noted by GNATS.

From: John Baldwin <jhb at FreeBSD.org>
To: Vadim Mikhailov <freebsd-bugs at mikhailov.org>
Cc: freebsd-gnats-submit at FreeBSD.org
Subject: Re: kern/68351: bge0 watchdog timeout on 5.2.1 and -current, 5.1 is ok
Date: Fri, 6 Aug 2004 14:15:21 -0400

 On Friday 06 August 2004 02:02 pm, Vadim Mikhailov wrote:
 > John Baldwin wrote:
 >  > Have you tried disabling ACPI to see if it works better?
 >
 >    Can not try it now - this is production server under load,
 > and it is working fine since I installed Intel Pro/1000 XT card to overcome
 > bge problems.
 >    But, as stated in my original report, I did try it disabling ACPI about
 > month ago with current - didn't make any difference.
 >
 >  > Also, can you provide mptable output?
 >
 >    Here it is:
 
 Thanks, can you also provide a full dmesg output?  The two bge's are routed to 
 pins 0 and 1 of the second I/O APIC which should be IRQs 16 and 17 if the 
 first I/O APIC has 16 interrupt pins (dmesg will tell me that).
 
 -- 
 John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
 "Power Users Use the Power to Serve"  =  http://www.FreeBSD.org