kern/53481: 5.1R does not recognise xl0 at every startup

[User &]

>Number:         53481
>Category:       kern
>Synopsis:       5.1R does not recognise xl0 at every startup
>Confidential:   no
>Severity:       serious
>Priority:       low
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Wed Jun 18 23:20:06 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator:     Oliver Fischer
>Release:        FreeBSD 5.1-RELEASE i386
>Organization:
privat
>Environment:
System: FreeBSD warpgondel2.xshare.com 5.1-RELEASE FreeBSD 5.1-RELEASE #0: Sat Jun 14 11:51:54 CEST 2003 root at warpgondel2.xshare.com:/usr/obj/usr/RELENG_5_1/sys/GENERIC i386


>Description:
        The system can't always initialise xl0 on my IBM T20. Sometimes
        I have to reboot up to three times.

>How-To-Repeat:
        Simply boot the laptop.
>Fix:

        Reboot the system until xl0 is initialised.

--- dmesg begins here ---
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Sat Jun 14 11:51:54 CEST 2003
    root at warpgondel2.xshare.com:/usr/obj/usr/RELENG_5_1/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d41f4.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 148245937 Hz
CPU: Intel Pentium III (148.25-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 402587648 (383 MB)
avail memory = 383623168 (365 MB)
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD    RSDT  > on motherboard
pcibios: BIOS version 2.10
Using $PIR table, 11 entries at 0xc00fdee0
acpi0: power button is handled as a fixed feature programming model.
Timecounter "ACPI-safe"  frequency 3579545 Hz
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <thermal zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 at device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
xl0: <3Com 3c556B Fast Etherlink XL> port 0-0xff at device 3.0 on pci0
xl0: chip is in D3 power mode -- setting to D0
xl0: couldn't map ports/memory
device_probe_and_attach: xl0 attach returned 6
pci0: <simple comms> at device 3.1 (no driver attached)
pci0: <multimedia, audio> at device 5.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0x1c00-0x1c0f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1c20-0x1c3f irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ums0: Logitech USB-PS/2 Mouse M-BA47, rev 1.00/1.20, addr 2, iclass 3/1
ums0: 4 buttons and Z dir.
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
ppc0 port 0x3bc-0x3c3 irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
acpi_cmbat1: <Control method Battery> on acpi0
acpi_acad0: <AC adapter> on acpi0
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xcc000-0xcc7ff,0xc0000-0xcbfff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
system power profile changed to 'economy'
ad0: 38154MB <IC25N040ATCS04-0> [77520/16/63] at ata0-master UDMA33
acd0: DVD-ROM <MATSHITADVD-ROM SR-8174> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.BAT1._STA] (Node 0xc3337080), AE_ERROR
    ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.BAT1._STA] (Node 0xc3337080), AE_ERROR
    ACPI-0432: *** Error: Handler for [EmbeddedControl] returned AE_ERROR
    ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.ISA_.EC__.AC__._PSR] (Node 0xc3336ee0), AE_ERROR
--- dmesg ends here ---


>Release-Note:
>Audit-Trail:
>Unformatted: