kern/54495: ACPI problem on Compaq Evo N620c

Tue Jul 15 02:30:16 PDT 2003

>Number:         54495
>Category:       kern
>Synopsis:       ACPI problem on Compaq Evo N620c
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-bugs
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Tue Jul 15 02:30:08 PDT 2003
>Closed-Date:
>Last-Modified:
>Originator:     Heikki Suonsivu
>Release:        FreeBSD 5.1-CURRENT i386
>Organization:
Wireless LAN Systems
>Environment:

System: FreeBSD evoluutio.bbnetworks.net 5.1-CURRENT FreeBSD 5.1-CURRENT #2: Sun Jul 13 18:38:34 CEST 2003 hsu at evoluutio.bbnetworks.net:/usr/obj/usr/src/sys/OLDCARD i386

Compaq Evo N620c laptop.  It does not seem to have apm (or apm fails
to load).

With The BIOS image it had when shipped, the computer did not even
boot to FreeBSD, not being able to mount root.  The computer BIOS has
been upgraded to latest available on Compaq WWW page, F.07A, which
allows it to boot, but it crashes in ACPI-related code.

>Description:

After booting, the computer crashes with the following:

Jul 13 21:10:25 evoluutio kernel: Copyright (c) 1992-2003 The FreeBSD Project.
Jul 13 21:10:25 evoluutio kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Jul 13 21:10:25 evoluutio kernel: The Regents of the University of California. All rights reserved.
Jul 13 21:10:25 evoluutio kernel: FreeBSD 5.1-CURRENT #2: Sun Jul 13 18:38:34 CEST 2003
Jul 13 21:10:25 evoluutio kernel: hsu at evoluutio.bbnetworks.net:/usr/obj/usr/src/sys/OLDCARD
Jul 13 21:10:25 evoluutio kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc0732000.
Jul 13 21:10:25 evoluutio kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07321f4.
Jul 13 21:10:25 evoluutio kernel: Timecounter "i8254"  frequency 1193182 Hz
Jul 13 21:10:25 evoluutio kernel: Timecounter "TSC"  frequency 1498733691 Hz
Jul 13 21:10:25 evoluutio kernel: CPU: Intel(R) Pentium(R) M processor 1500MHz (1498.73-MHz 686-class CPU)
Jul 13 21:10:25 evoluutio kernel: Origin = "GenuineIntel"  Id = 0x695  Stepping = 5
Jul 13 21:10:25 evoluutio kernel: Features=0xa7e9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,TM,PBE>
Jul 13 21:10:25 evoluutio kernel: real memory  = 536674304 (511 MB)
Jul 13 21:10:25 evoluutio kernel: avail memory = 513478656 (489 MB)
Jul 13 21:10:25 evoluutio kernel: Pentium Pro MTRR support enabled
Jul 13 21:10:25 evoluutio kernel: npx0: <math processor> on motherboard
Jul 13 21:10:25 evoluutio kernel: npx0: INT 16 interface
Jul 13 21:10:25 evoluutio kernel: acpi0: <COMPAQ CPQ0058 > on motherboard
Jul 13 21:10:25 evoluutio kernel: pcibios: BIOS version 2.10
Jul 13 21:10:25 evoluutio kernel: ACPI-0351: *** Error: Could not install PciConfig handler for C046, AE_ALREADY_EXISTS
Jul 13 21:10:25 evoluutio last message repeated 3 times
Jul 13 21:10:25 evoluutio kernel: acpi0: power button is handled as a fixed feature programming model.
Jul 13 21:10:25 evoluutio kernel: Timecounter "ACPI-fast"  frequency 3579545 Hz
Jul 13 21:10:25 evoluutio kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
Jul 13 21:10:25 evoluutio kernel: acpi_cpu0: <CPU> on acpi0
Jul 13 21:10:25 evoluutio kernel: acpi_tz0: <thermal zone> on acpi0
Jul 13 21:10:25 evoluutio kernel: acpi_tz1: <thermal zone> on acpi0
Jul 13 21:10:25 evoluutio kernel: acpi_tz2: <thermal zone> on acpi0
Jul 13 21:10:25 evoluutio kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Jul 13 21:10:25 evoluutio kernel: pci0: <ACPI PCI bus> on pcib0
Jul 13 21:10:25 evoluutio kernel: pcib0: slot 29 INTA is routed to irq 10
Jul 13 21:10:25 evoluutio kernel: pcib0: slot 29 INTB is routed to irq 10
Jul 13 21:10:25 evoluutio kernel: pcib0: slot 29 INTC is routed to irq 10
Jul 13 21:10:25 evoluutio kernel: pcib0: slot 29 INTD is routed to irq 10
Jul 13 21:10:25 evoluutio kernel: pcib0: slot 31 INTA is routed to irq 10
Jul 13 21:10:25 evoluutio kernel: pcib0: slot 31 INTB is routed to irq 11
Jul 13 21:10:25 evoluutio kernel: pcib0: slot 31 INTB is routed to irq 11
Jul 13 21:10:25 evoluutio kernel: agp0: <Intel 82855 host to AGP bridge> mem 0xb0000000-0xbfffffff at device 0.0 on pci0
Jul 13 21:10:25 evoluutio kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
Jul 13 21:10:25 evoluutio kernel: pci1: <ACPI PCI bus> on pcib1
Jul 13 21:10:25 evoluutio kernel: pcib1: slot 0 INTA is routed to irq 10
Jul 13 21:10:25 evoluutio kernel: pci1: <display, VGA> at device 0.0 (no driver attached)
Jul 13 21:10:25 evoluutio kernel: uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x38c0-0x38df irq 10 at device 29.0 on pci0
Jul 13 21:10:25 evoluutio kernel: usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
Jul 13 21:10:25 evoluutio kernel: usb0: USB revision 1.0
Jul 13 21:10:25 evoluutio kernel: uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jul 13 21:10:25 evoluutio kernel: uhub0: 2 ports with 2 removable, self powered
Jul 13 21:10:25 evoluutio kernel: uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x38e0-0x38ff irq 10 at device 29.1 on pci0
Jul 13 21:10:25 evoluutio kernel: usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
Jul 13 21:10:25 evoluutio kernel: usb1: USB revision 1.0
Jul 13 21:10:25 evoluutio kernel: uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jul 13 21:10:25 evoluutio kernel: uhub1: 2 ports with 2 removable, self powered
Jul 13 21:10:25 evoluutio kernel: uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x3c00-0x3c1f irq 10 at device 29.2 on pci0
Jul 13 21:10:25 evoluutio kernel: usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
Jul 13 21:10:25 evoluutio kernel: usb2: USB revision 1.0
Jul 13 21:10:25 evoluutio kernel: uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jul 13 21:10:25 evoluutio kernel: uhub2: 2 ports with 2 removable, self powered
Jul 13 21:10:25 evoluutio kernel: pci0: <serial bus, USB> at device 29.7 (no driver attached)
Jul 13 21:10:25 evoluutio kernel: pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
Jul 13 21:10:25 evoluutio kernel: pci2: <ACPI PCI bus> on pcib2
Jul 13 21:10:25 evoluutio kernel: pcib2: slot 6 INTA is routed to irq 10
Jul 13 21:10:25 evoluutio kernel: pcib2: slot 6 INTA is routed to irq 10
Jul 13 21:10:25 evoluutio kernel: pcib2: slot 14 INTA is routed to irq 11
Jul 13 21:10:25 evoluutio kernel: pcic0: <O2micro 6933 PCI-Cardbus Bridge> mem 0x90080000-0x90080fff irq 10 at device 6.0 on pci2
Jul 13 21:10:25 evoluutio kernel: pcic0: Warning: O2micro OZ68xx chips may not work
Jul 13 21:10:25 evoluutio kernel: pccard0: <PC Card 16-bit bus (classic)> on pcic0
Jul 13 21:10:25 evoluutio kernel: pcic1: <O2micro 6933 PCI-Cardbus Bridge> mem 0x90100000-0x90100fff irq 10 at device 6.1 on pci2
Jul 13 21:10:25 evoluutio kernel: pcic1: Warning: O2micro OZ68xx chips may not work
Jul 13 21:10:25 evoluutio kernel: pccard1: <PC Card 16-bit bus (classic)> on pcic1
Jul 13 21:10:25 evoluutio kernel: pci2: <network, ethernet> at device 14.0 (no driver attached)
Jul 13 21:10:25 evoluutio kernel: isab0: <PCI-ISA bridge> at device 31.0 on pci0
Jul 13 21:10:25 evoluutio kernel: isa0: <ISA bus> on isab0
Jul 13 21:10:25 evoluutio kernel: atapci0: <Intel ICH4 UDMA100 controller> port 0x3c20-0x3c2f,0-0x3,0-0x7,0-0x3,0-0x7 irq 10 at device 31.1 on pci0
Jul 13 21:10:25 evoluutio kernel: ata0: at 0x1f0 irq 14 on atapci0
Jul 13 21:10:25 evoluutio kernel: ata1: at 0x170 irq 15 on atapci0
Jul 13 21:10:25 evoluutio kernel: pci0: <multimedia, audio> at device 31.5 (no driver attached)
Jul 13 21:10:25 evoluutio kernel: pci0: <simple comms> at device 31.6 (no driver attached)
Jul 13 21:10:25 evoluutio kernel: acpi_cmbat0: <Control method Battery> on acpi0
Jul 13 21:10:25 evoluutio kernel: acpi_cmbat1: <Control method Battery> on acpi0
Jul 13 21:10:25 evoluutio kernel: acpi_acad0: <AC adapter> on acpi0
Jul 13 21:10:25 evoluutio kernel: acpi_button0: <Sleep Button> on acpi0
Jul 13 21:10:25 evoluutio kernel: acpi_lid0: <Control Method Lid Switch> on acpi0
Jul 13 21:10:25 evoluutio kernel: atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
Jul 13 21:10:25 evoluutio kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Jul 13 21:10:25 evoluutio kernel: kbd0 at atkbd0
Jul 13 21:10:25 evoluutio kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Jul 13 21:10:25 evoluutio kernel: sio0: type 16550A
Jul 13 21:10:25 evoluutio kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
Jul 13 21:10:25 evoluutio kernel: fdc0: FIFO enabled, 8 bytes threshold
Jul 13 21:10:25 evoluutio kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Jul 13 21:10:25 evoluutio kernel: sio1 port 0-0x7,0x3e8-0x3ef irq 3 drq 3 on acpi0
Jul 13 21:10:25 evoluutio kernel: sio1: type 16550A
Jul 13 21:10:25 evoluutio kernel: ppc0 port 0x778-0x77a,0x378-0x37f irq 7 drq 1 on acpi0
Jul 13 21:10:25 evoluutio kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Jul 13 21:10:25 evoluutio kernel: ppc0: FIFO with 16/16/8 bytes threshold
Jul 13 21:10:25 evoluutio kernel: ppbus0: <Parallel port bus> on ppc0
Jul 13 21:10:25 evoluutio kernel: plip0: <PLIP network interface> on ppbus0
Jul 13 21:10:25 evoluutio kernel: lpt0: <Printer> on ppbus0
Jul 13 21:10:25 evoluutio kernel: lpt0: Interrupt-driven port
Jul 13 21:10:25 evoluutio kernel: ppi0: <Parallel I/O> on ppbus0
Jul 13 21:10:25 evoluutio kernel: orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0
Jul 13 21:10:25 evoluutio kernel: pmtimer0 on isa0
Jul 13 21:10:25 evoluutio kernel: sc0: <System console> at flags 0x100 on isa0
Jul 13 21:10:25 evoluutio kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Jul 13 21:10:25 evoluutio kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jul 13 21:10:25 evoluutio kernel: Timecounters tick every 10.000 msec
Jul 13 21:10:25 evoluutio kernel: acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
Jul 13 21:10:25 evoluutio kernel: ACPI-0331: *** Error: Cannot release Mutex [_GL_], not acquired
Jul 13 21:10:25 evoluutio kernel: ACPI-1287: *** Error: Method execution failed [\_SB_.C046.C059.C0E4.C141] (Node 0xc4078a80), AE_AML_MUTEX_NOT_ACQUIRED
Jul 13 21:10:25 evoluutio kernel: ACPI-1287: *** Error: Method execution failed [\_SB_.C046.C059.C0E4.C153] (Node 0xc4078860), AE_AML_MUTEX_NOT_ACQUIRED
Jul 13 21:10:25 evoluutio kernel: ACPI-1287: *** Error: Method execution failed [\_SB_.C046.C059.C0E4.C159] (Node 0xc40787e0), AE_AML_MUTEX_NOT_ACQUIRED
Jul 13 21:10:25 evoluutio kernel: ACPI-1287: *** Error: Method execution failed [\_SB_.C046.C059.C0E4.C160] (Node 0xc4078780), AE_AML_MUTEX_NOT_ACQUIRED
Jul 13 21:10:25 evoluutio kernel: ACPI-1287: *** Error: Method execution failed [\_SB_.C160] (Node 0xc407e120), AE_AML_MUTEX_NOT_ACQUIRED
Jul 13 21:10:25 evoluutio kernel: ACPI-1287: *** Error: Method execution failed [\_SB_.C1B1._BST] (Node 0xc407e000), AE_AML_MUTEX_NOT_ACQUIRED
Jul 13 21:10:25 evoluutio kernel: ad0: 57231MB <TOSHIBA MK6022GAX> [116280/16/63] at ata0-master UDMA100
Jul 13 21:10:25 evoluutio kernel: acd0: CD-RW <SD-R2312> at ata1-master PIO4
Jul 13 21:10:25 evoluutio kernel: Mounting root from ufs:/dev/ad0s2a
Jul 13 21:10:25 evoluutio kernel: pccard: card inserted, slot 0
Jul 13 21:10:25 evoluutio kernel: pccard: card removed, slot 0
Jul 13 21:10:25 evoluutio kernel: pccard: card inserted, slot 0
Jul 13 21:10:25 evoluutio kernel: 
Jul 13 21:10:25 evoluutio kernel: 
Jul 13 21:10:25 evoluutio kernel: Fatal trap 12: page fault while in kernel mode
Jul 13 21:10:25 evoluutio kernel: fault virtual address	= 0x10ff
Jul 13 21:10:25 evoluutio kernel: fault code		= supervisor read, page not present
Jul 13 21:10:25 evoluutio kernel: instruction pointer	= 0x8:0xc0701ab0
Jul 13 21:10:25 evoluutio kernel: stack pointer	        = 0x10:0xd67adbe0
Jul 13 21:10:25 evoluutio kernel: frame pointer	        = 0x10:0xd67adbe0
Jul 13 21:10:25 evoluutio kernel: code segment		= base 0x0, limit 0xfffff, type 0x1b
Jul 13 21:10:25 evoluutio kernel: = DPL 0, pres 1, def32 1, gran 1
Jul 13 21:10:25 evoluutio kernel: processor eflags	= interrupt enabled, resume, IOPL = 0
Jul 13 21:10:25 evoluutio kernel: current process		= 23 (acpi_thermal)
Jul 13 21:10:25 evoluutio kernel: 

The crash occurs slightly after booting, and the time seems to vary
from few seconds to tens of seconds.  I would guess the problem is
related to cpu or computer temperature.

>How-To-Repeat:

Likely to in all Compaq Evo N620c's, as Linux people have been
complaining about something related to ACPI and thermal stuff.

>Fix:

>Release-Note:
>Audit-Trail:
>Unformatted: