kern/55678: IDE-CDROM not recognised

[Ceri Davies]

The following reply was made to PR kern/55678; it has been noted by GNATS.

From: Ceri Davies <ceri at FreeBSD.org>
To: FreeBSD Gnats Submit <freebsd-gnats-submit at FreeBSD.org>
Cc:  
Subject: Re: kern/55678: IDE-CDROM not recognised
Date: Mon, 25 Aug 2003 19:54:34 +0100

 Adding to audit trail, from misfiled PR kern/55681:
 
 Date: Sun, 17 Aug 2003 21:57:38 +0200 (CEST)
 From: Soeren Schmidt <sos at spider.deepcore.dk>
 Message-Id: <200308171957.h7HJvc13027749 at spider.deepcore.dk>
 Subject: pending/55681: Re: IDE-CDROM not recognised
 
  It seems Volker Stolz wrote:
  > >Description:
  > On this -CURRENT machine, the IDE-CDROM is not detected (although IIRC it was in
  > previous versions -- sorry, can't pin down the exact date :/). It's connected
  > as slave and works flawless in W2k on the same machine.
  > 
  > # atacontrol info 0
  > Master:  ad0 <MAXTOR 6L040J2/A93.0300> ATA/ATAPI rev 5
  > Slave:       <4X4X32/3.KR> ATA/ATAPI rev 0
  > 
  > Snippets from dmesg:
  > ...
  > atapci0: <VIA 82C686B UDMA100 controller> port 0xa000-0xa00f at device 7.1 on pci0
  > ata0: at 0x1f0 irq 14 on atapci0
  > ata1: at 0x170 irq 15 on atapci0
  > ...
  > ad0: DMA limited to UDMA33, non-ATA66 cable or device
  > ad0: 32253MB <MAXTOR 6L040J2> [69899/15/63] at ata0-master UDMA33
  > ad2: 19623MB <IBM-DTLA-305020> [39870/16/63] at ata1-master UDMA100
  
  You should try the ATAnf driver thats in the works, look at
  ftp.deepcore.dk/pub/ATAng
  
  -Søren