pci0: <serial bus, SMBus> at device 31.3 (no driver attached)

Tapac Янчук dtla307045 at ukr.net
Sun Oct 14 07:10:47 PDT 2007


Hello, Bugbsters!    
After a series of sudden reboots, it became necessary to check the temperature of processor and chipset, voltage, and the work of fans. But that was not the driver for SMBus (S5000VSA INTEL)    
    
После серии внезапных перезагрузок, возникла необходимость проверять температуру процессоров и чипсета, напряжение, и работу вентиляторов. Но оказалось что нет драйвера для SMBus (INTEL S5000VSA)    
    
gala-net# dmesg    
Copyright (c) 1992-2006 The FreeBSD Project.    
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994    
The Regents of the University of California. All rights reserved.    
FreeBSD is a registered trademark of The FreeBSD Foundation.    
FreeBSD 6.2-PRERELEASE #1: Thu Jan 25 12:20:13 EET 2007    
taras at gala-net.poltava.ua:/usr/src/sys/i386/compile/GATE-SMP    
Timecounter "i8254" frequency 1193182 Hz quality 0    
CPU: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (2002.99-MHz 686-class CPU)    
Origin = "GenuineIntel" Id = 0x6f6 Stepping = 6    
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>    
Features2=0x4e33d<SSE3,RSVD2,MON,DS_CPL,VMX,TM2,<b9>,CX16,<b14>,<b15>,<b18>>    
AMD Features=0x20100000<NX,LM>    
AMD Features2=0x1<LAHF>    
Cores per package: 2    
real memory = 2143289344 (2044 MB)    
avail memory = 2090860544 (1994 MB)    
ACPI APIC Table: <INTEL S5000VSA>    
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs    
cpu0 (BSP): APIC ID: 0    
cpu1 (AP): APIC ID: 1    
cpu2 (AP): APIC ID: 6    
cpu3 (AP): APIC ID: 7    
ioapic0 <Version 2.0> irqs 0-23 on motherboard    
ioapic1 <Version 2.0> irqs 24-47 on motherboard    
lapic0: Forcing LINT1 to edge trigger    
kbd1 at kbdmux0    
acpi0: <INTEL S5000VSA> on motherboard    
acpi0: Power Button (fixed)    
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000    
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0    
cpu0: <ACPI CPU> on acpi0    
acpi_throttle0: <ACPI CPU Throttling> on cpu0    
cpu1: <ACPI CPU> on acpi0    
acpi_throttle1: <ACPI CPU Throttling> on cpu1    
acpi_throttle1: failed to attach P_CNT    
device_attach: acpi_throttle1 attach returned 6    
cpu2: <ACPI CPU> on acpi0    
acpi_throttle2: <ACPI CPU Throttling> on cpu2    
acpi_throttle2: failed to attach P_CNT    
device_attach: acpi_throttle2 attach returned 6    
cpu3: <ACPI CPU> on acpi0    
acpi_throttle3: <ACPI CPU Throttling> on cpu3    
acpi_throttle3: failed to attach P_CNT    
device_attach: acpi_throttle3 attach returned 6    
acpi_button0: <Sleep Button> on acpi0    
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0    
pci0: <ACPI PCI bus> on pcib0    
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0    
pci1: <ACPI PCI bus> on pcib1    
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci1    
pci2: <ACPI PCI bus> on pcib2    
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 0.0 on pci2    
pci3: <ACPI PCI bus> on pcib3    
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 1.0 on pci2    
pci4: <ACPI PCI bus> on pcib4    
pcib5: <ACPI PCI-PCI bridge> irq 18 at device 2.0 on pci2    
pci5: <ACPI PCI bus> on pcib5    
em0: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3020-0x303f mem 0xb8820000-0xb883ffff,0xb8400000-0xb87fffff irq 18 at device 0.0 on pci5    
em0: Ethernet address: 00:15:17:0c:be:e4    
em1: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x3000-0x301f mem 0xb8800000-0xb881ffff,0xb8000000-0xb83fffff irq 19 at device 0.1 on pci5    
em1: Ethernet address: 00:15:17:0c:be:e5    
pcib6: <ACPI PCI-PCI bridge> at device 0.3 on pci1    
pci6: <ACPI PCI bus> on pcib6    
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x2000-0x20ff mem 0xb8900000-0xb891ffff,0xb8920000-0xb893ffff irq 27 at device 2.0 on pci6    
mpt0: [GIANT-LOCKED]    
mpt0: MPI Version=1.2.15.0    
mpt0: Capabilities: ( RAID-0 SAFTE )    
mpt0: 1 Active Volume (1 Max)    
mpt0: 2 Hidden Drive Members (6 Max)    
pcib7: <PCI-PCI bridge> at device 3.0 on pci0    
pci7: <PCI bus> on pcib7    
pci0: <base peripheral> at device 8.0 (no driver attached)    
pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0    
pci8: <ACPI PCI bus> on pcib8    
uhci0: <UHCI (generic) USB controller> port 0x4080-0x409f irq 23 at device 29.0 on pci0    
uhci0: [GIANT-LOCKED]    
usb0: <UHCI (generic) USB controller> on uhci0    
usb0: USB revision 1.0    
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1    
uhub0: 2 ports with 2 removable, self powered    
uhci1: <UHCI (generic) USB controller> port 0x4060-0x407f irq 22 at device 29.1 on pci0    
uhci1: [GIANT-LOCKED]    
usb1: <UHCI (generic) USB controller> on uhci1    
usb1: USB revision 1.0    
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1    
uhub1: 2 ports with 2 removable, self powered    
uhci2: <UHCI (generic) USB controller> port 0x4040-0x405f irq 23 at device 29.2 on pci0    
uhci2: [GIANT-LOCKED]    
usb2: <UHCI (generic) USB controller> on uhci2    
usb2: USB revision 1.0    
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1    
uhub2: 2 ports with 2 removable, self powered    
uhci3: <UHCI (generic) USB controller> port 0x4020-0x403f irq 22 at device 29.3 on pci0    
uhci3: [GIANT-LOCKED]    
usb3: <UHCI (generic) USB controller> on uhci3    
usb3: USB revision 1.0    
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1    
uhub3: 2 ports with 2 removable, self powered    
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xb8c00400-0xb8c007ff irq 23 at device 29.7 on pci0    
ehci0: [GIANT-LOCKED]    
usb4: EHCI version 1.0    
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3    
usb4: <EHCI (generic) USB 2.0 controller> on ehci0    
usb4: USB revision 2.0    
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1    
uhub4: 8 ports with 8 removable, self powered    
pcib9: <ACPI PCI-PCI bridge> at device 30.0 on pci0    
pci9: <ACPI PCI bus> on pcib9    
pci9: <display, VGA> at device 12.0 (no driver attached)    
em2: <Intel(R) PRO/1000 Network Connection Version - 6.2.9> port 0x1400-0x143f mem 0xb8b20000-0xb8b3ffff,0xb8b00000-0xb8b1ffff irq 16 at device 13.0 on pci9    
em2: Ethernet address: 00:0e:0c:d8:60:23    
isab0: <PCI-ISA bridge> at device 31.0 on pci0    
isa0: <ISA bus> on isab0    
atapci0: <Intel 63XXESB2 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x40b0-0x40bf irq 20 at device 31.1 on pci0    
ata0: <ATA channel 0> on atapci0    
ata1: <ATA channel 1> on atapci0    
atapci1: <Intel 63XXESB2 SATA300 controller> port 0x40c8-0x40cf,0x40e4-0x40e7,0x40c0-0x40c7,0x40e0-0x40e3,0x40a0-0x40af mem 0xb8c00000-0xb8c003ff irq 20 at device 31.2 on pci0    
ata2: <ATA channel 0> on atapci1    
ata3: <ATA channel 1> on atapci1    
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)    
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0    
atkbd0: <AT Keyboard> irq 1 on atkbdc0    
kbd0 at atkbd0    
atkbd0: [GIANT-LOCKED]    
psm0: <PS/2 Mouse> irq 12 on atkbdc0    
psm0: [GIANT-LOCKED]    
psm0: model Generic PS/2 mouse, device ID 0    
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0    
sio0: type 16550A    
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0    
sio1: type 16550A    
pmtimer0 on isa0    
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xccfff,0xcd000-0xcdfff,0xce000-0xcefff,0xcf000-0xcffff on isa0    
sc0: <System console> at flags 0x100 on isa0    
sc0: VGA <16 virtual consoles, flags=0x300>    
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0    
Timecounters tick every 1.000 msec    
IP Filter: v4.1.13 initialized. Default = pass all, Logging = enabled    
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding enabled, default to accept, logging unlimited    
ad4: 238475MB <Seagate ST3250620AS 3.AAE> at ata2-master SATA150    
Waiting 5 seconds for SCSI devices to settle    
mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares )    
mpt0:vol0(mpt0:0:0): 2 Members:    
(mpt0:0:0): Stripe Position 0    
(mpt0:0:2): Stripe Position 1    
mpt0:vol0(mpt0:0:0): RAID-0 - Optimal    
mpt0:vol0(mpt0:0:0): Status ( Enabled )    
(mpt0:vol0:0): Physical (mpt0:0:0), Pass-thru (mpt0:1:0)    
(mpt0:vol0:0): Online    
(mpt0:vol0:1): Physical (mpt0:0:2), Pass-thru (mpt0:1:1)    
(mpt0:vol0:1): Online    
lapic1: Forcing LINT1 to edge trigger    
SMP: AP CPU #1 Launched!    
lapic7: Forcing LINT1 to edge trigger    
SMP: AP CPU #3 Launched!    
lapic6: Forcing LINT1 to edge trigger    
SMP: AP CPU #2 Launched!    
da0 at mpt0 bus 0 target 0 lun 0    
da0: <LSILOGIC 1030 IS 1000> Fixed Direct Access SCSI-2 device    
da0: 320.000MB/s transfers (160.000MHz, offset 63, 16bit), Tagged Queueing Enabled    
da0: 139756MB (286220288 512 byte sectors: 255H 63S/T 17816C)    
Trying to mount root from ufs:/dev/da0s1a    
WARNING: / was not properly dismounted    
WARNING: /backup1 was not properly dismounted    
WARNING: /backup2 was not properly dismounted    
WARNING: /datas was not properly dismounted    
WARNING: /tmp was not properly dismounted    
WARNING: /usr was not properly dismounted    
WARNING: /var was not properly dismounted    
/var: mount pending error: blocks 128 files 4    
em2: link state changed to UP    
em1: link state changed to UP    
ipfw: pullup failed    
ipfw: pullup failed    
    
HELP ME!!!    
  


More information about the freebsd-bugbusters mailing list