bluetooth not worked after upgrade to xorg 7.4

Subscriber subscr1024 at mail.ru
Sun Feb 8 04:19:12 PST 2009


Excuse me for too short message. I use 8-CURRENT on MSI GX710 notebook. Basic 
info follows.

Subscriber пишет:
> I'm not sure about proper mail list...
> 
> After update xorg my bluetooth mouse (Logitech v470) won't work in 
> graphic mode. Just after boot up, when in console, mouse work as 
> expected, but after typing 'startx\n' I can use only built-in touchpad. 
> However randomly (with probability, say, 1/10) it work in graphic mode 
> too - until next reboot.
> 
> If mouse not work, I tried to restart hcsecd and bthidd, bring mouse 
> visible via 'connect' button. All this actions seems no effect in 
> graphic mode.
> 
> 
> -- 
> Best regards.

# uname -a
FreeBSD user 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Fri Feb  6 04:25:02 MSK 2009 
user at user:/usr/obj/usr/src/sys/GX710.8  amd64


#dmesg
Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Fri Feb  6 04:25:02 MSK 2009
     user at user:/usr/obj/usr/src/sys/GX710.8
link_elf_obj: symbol unit2minor undefined
KLD file kqemu.ko - could not finalize loading
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-64 (798.00-MHz K8-class CPU)
   Origin = "AuthenticAMD"  Id = 0x60f81  Stepping = 1
 
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
   Features2=0x2001<SSE3,CX16>
   AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
   AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
   Cores per package: 2
usable memory = 4284547072 (4086 MB)
avail memory  = 4120961024 (3930 MB)
ACPI APIC Table: <MSI_NB MEGABOOK>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.1> irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
acpi0: <MSI_NB MEGABOOK> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff000166cc80) 
[EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]

**** Exception AE_NOT_EXIST during execution of method 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880)

Method Execution Stack:
     Method [_STA] executing: MBTS

Local Variables for method [_STA]:
     Local0: 0 <Null Object>
     Local1: 0 <Null Object>
     Local2: 0 <Null Object>
     Local3: 0 <Null Object>
     Local4: 0 <Null Object>
     Local5: 0 <Null Object>
     Local6: 0 <Null Object>
     Local7: 0 <Null Object>

Arguments for Method [_STA]:  (0 arguments defined, max concurrency = 0)
     Arg0:   0 <Null Object>
     Arg1:   0 <Null Object>
     Arg2:   0 <Null Object>
     Arg3:   0 <Null Object>
     Arg4:   0 <Null Object>
     Arg5:   0 <Null Object>
     Arg6:   0 <Null Object>

ACPI Error (psparse-0626): Method parse/execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff000166cc80) 
[EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]

**** Exception AE_NOT_EXIST during execution of method 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880)

Method Execution Stack:
     Method [_STA] executing: MBTS

Local Variables for method [_STA]:
     Local0: 0 <Null Object>
     Local1: 0 <Null Object>
     Local2: 0 <Null Object>
     Local3: 0 <Null Object>
     Local4: 0 <Null Object>
     Local5: 0 <Null Object>
     Local6: 0 <Null Object>
     Local7: 0 <Null Object>

Arguments for Method [_STA]:  (0 arguments defined, max concurrency = 0)
     Arg0:   0 <Null Object>
     Arg1:   0 <Null Object>
     Arg2:   0 <Null Object>
     Arg3:   0 <Null Object>
     Arg4:   0 <Null Object>
     Arg5:   0 <Null Object>
     Arg6:   0 <Null Object>

ACPI Error (psparse-0626): Method parse/execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff000166cc80) 
[EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]

**** Exception AE_NOT_EXIST during execution of method 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880)

Method Execution Stack:
     Method [_STA] executing: MBTS

Local Variables for method [_STA]:
     Local0: 0 <Null Object>
     Local1: 0 <Null Object>
     Local2: 0 <Null Object>
     Local3: 0 <Null Object>
     Local4: 0 <Null Object>
     Local5: 0 <Null Object>
     Local6: 0 <Null Object>
     Local7: 0 <Null Object>

Arguments for Method [_STA]:  (0 arguments defined, max concurrency = 0)
     Arg0:   0 <Null Object>
     Arg1:   0 <Null Object>
     Arg2:   0 <Null Object>
     Arg3:   0 <Null Object>
     Arg4:   0 <Null Object>
     Arg5:   0 <Null Object>
     Arg6:   0 <Null Object>

ACPI Error (psparse-0626): Method parse/execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff000166cc80) 
[EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]

**** Exception AE_NOT_EXIST during execution of method 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880)

Method Execution Stack:
     Method [_STA] executing: MBTS

Local Variables for method [_STA]:
     Local0: 0 <Null Object>
     Local1: 0 <Null Object>
     Local2: 0 <Null Object>
     Local3: 0 <Null Object>
     Local4: 0 <Null Object>
     Local5: 0 <Null Object>
     Local6: 0 <Null Object>
     Local7: 0 <Null Object>

Arguments for Method [_STA]:  (0 arguments defined, max concurrency = 0)
     Arg0:   0 <Null Object>
     Arg1:   0 <Null Object>
     Arg2:   0 <Null Object>
     Arg3:   0 <Null Object>
     Arg4:   0 <Null Object>
     Arg5:   0 <Null Object>
     Arg6:   0 <Null Object>

ACPI Error (psparse-0626): Method parse/execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff000166cc80) 
[EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]

**** Exception AE_NOT_EXIST during execution of method 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880)

Method Execution Stack:
     Method [_STA] executing: MBTS

Local Variables for method [_STA]:
     Local0: 0 <Null Object>
     Local1: 0 <Null Object>
     Local2: 0 <Null Object>
     Local3: 0 <Null Object>
     Local4: 0 <Null Object>
     Local5: 0 <Null Object>
     Local6: 0 <Null Object>
     Local7: 0 <Null Object>

Arguments for Method [_STA]:  (0 arguments defined, max concurrency = 0)
     Arg0:   0 <Null Object>
     Arg1:   0 <Null Object>
     Arg2:   0 <Null Object>
     Arg3:   0 <Null Object>
     Arg4:   0 <Null Object>
     Arg5:   0 <Null Object>
     Arg6:   0 <Null Object>

ACPI Error (psparse-0626): Method parse/execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff000166cc80) 
[EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]

**** Exception AE_NOT_EXIST during execution of method 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880)

Method Execution Stack:
     Method [_STA] executing: MBTS

Local Variables for method [_STA]:
     Local0: 0 <Null Object>
     Local1: 0 <Null Object>
     Local2: 0 <Null Object>
     Local3: 0 <Null Object>
     Local4: 0 <Null Object>
     Local5: 0 <Null Object>
     Local6: 0 <Null Object>
     Local7: 0 <Null Object>

Arguments for Method [_STA]:  (0 arguments defined, max concurrency = 0)
     Arg0:   0 <Null Object>
     Arg1:   0 <Null Object>
     Arg2:   0 <Null Object>
     Arg3:   0 <Null Object>
     Arg4:   0 <Null Object>
     Arg5:   0 <Null Object>
     Arg6:   0 <Null Object>

ACPI Error (psparse-0626): Method parse/execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (evregion-0427): No handler for Region [EC__] (0xffffff000166cc80) 
[EmbeddedControl] [20070320]
ACPI Error (exfldio-0390): Region EmbeddedControl(3) has no handler [20070320]

**** Exception AE_NOT_EXIST during execution of method 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880)

Method Execution Stack:
     Method [_STA] executing: MBTS

Local Variables for method [_STA]:
     Local0: 0 <Null Object>
     Local1: 0 <Null Object>
     Local2: 0 <Null Object>
     Local3: 0 <Null Object>
     Local4: 0 <Null Object>
     Local5: 0 <Null Object>
     Local6: 0 <Null Object>
     Local7: 0 <Null Object>

Arguments for Method [_STA]:  (0 arguments defined, max concurrency = 0)
     Arg0:   0 <Null Object>
     Arg1:   0 <Null Object>
     Arg2:   0 <Null Object>
     Arg3:   0 <Null Object>
     Arg4:   0 <Null Object>
     Arg5:   0 <Null Object>
     Arg6:   0 <Null Object>

ACPI Error (psparse-0626): Method parse/execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
ACPI Error (uteval-0309): Method execution failed 
[\\_SB_.PCI0.SBRG.EC__.BAT1._STA] (Node 0xffffff000166f880), AE_NOT_EXIST
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
ACPI HPET table warning: Sequence is non-zero (2)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x6> port 0x62,0x66 on acpi0
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xb000-0xb0ff mem 
0xd0000000-0xdfffffff,0xfd6f0000-0xfd6fffff irq 18 at device 0.0 on pci1
acpi_video0: <ACPI video extension> on vgapci0
hdac0: <ATI RV630 High Definition Audio Controller> mem 0xfd6ec000-0xfd6effff 
irq 19 at device 0.1 on pci1
hdac0: HDA Driver Revision: 20090131_0127
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 5424/2424> mem 0xfd7f0000-0xfd7fffff irq 16 at device 0.0 on pci2
ath0: [ITHREAD]
ath0: WARNING: using obsoleted if_watchdog interface
ath0: mac 14.2 phy 7.0 radio 10.2
pcib3: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pci5: <ACPI PCI bus> on pcib4
re0: <RealTek 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit 
Ethernet> port 0xc800-0xc8ff mem 0xfe2ff000-0xfe2fffff irq 19 at device 0.0 on 
pci5
re0: turning off MSI enable bit.
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 
1000baseT-FDX, auto
re0: Ethernet address: 00:1d:92:4b:18:11
re0: [FILTER]
atapci0: <ATI IXP600 SATA300 controller> port 
0xa000-0xa007,0x9000-0x9003,0x8000-0x8007,0x7000-0x7003,0x6000-0x600f mem 
0xfd5ff800-0xfd5ffbff irq 22 at device 18.0 on pci0
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports PM supported
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xfd5fe000-0xfd5fefff irq 16 at 
device 19.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xfd5fd000-0xfd5fdfff irq 17 at 
device 19.1 on pci0
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xfd5fc000-0xfd5fcfff irq 18 at 
device 19.2 on pci0
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xfd5fb000-0xfd5fbfff irq 17 at 
device 19.3 on pci0
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xfd5fa000-0xfd5fafff irq 18 at 
device 19.4 on pci0
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfd5ff000-0xfd5ff0ff irq 19 at 
device 19.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
ugen0: <vendor 0x0402 USB2.0 Camera, class 0/0, rev 2.00/1.00, addr 2> on uhub5
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel 0> on atapci1
ata0: [ITHREAD]
hdac1: <ATI SB600 High Definition Audio Controller> mem 0xfd5f4000-0xfd5f7fff 
irq 16 at device 20.2 on pci0
hdac1: HDA Driver Revision: 20090131_0127
hdac1: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib5
cbb0: <PCI-CardBus Bridge> irq 20 at device 4.0 on pci6
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
pci6: <base peripheral, SD host controller> at device 4.2 (no driver attached)
pci6: <bridge> at device 4.3 (no driver attached)
fwohci0: <1394 Open Host Controller Interface> mem 
0xfe3fd000-0xfe3fdfff,0xfe3ff000-0xfe3ff7ff irq 20 at device 4.4 on pci6
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 8.
fwohci0: EUI64 00:dc:10:00:af:43:34:01
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x15fc000
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:dc:10:43:34:01
fwe0: Ethernet address: 02:dc:10:43:34:01
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:dc:10:00:af:43:34:01 @ 0xfffe00000000, S400, 
maxrec 2048
fwohci0: Initiate bus reset
fwohci0: BUS reset
fwohci0: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
k8temp0: <AMD K8 Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: CLK_VAL field overlaps THT_EN bit
device_attach: acpi_throttle0 attach returned 6
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ugen1: <Formosa21 SnowflakeEmulation, class 0/0, rev 2.00/1.30, addr 2> on uhub3
ubt0: <vendor 0x0db0 product 0xa97a, class 224/1, rev 2.00/31.64, addr 3> on uhub3
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 5) endpoints: isoc-in=0x83, isoc-out=0x3; 
wMaxPacketSize=49; nframes=10, buffer size=490
Timecounters tick every 1.000 msec
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
acd0: DVDR <Optiarc DVD RW AD-7530B/NX02> at ata0-master UDMA33
ad4: 238475MB <WDC WD2500BEVS-00UST0 01.01A01> at ata2-master SATA150
hdac0: HDA Codec #0: ATI R6xx HDMI
pcm0: <HDA ATI R6xx HDMI PCM #0 Digital> at cad 0 nid 1 on hdac0
hdac1: HDA Codec #0: Realtek ALC888
hdac1: HDA Codec #1: Lucent/Agere Systems (Unknown)
pcm1: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac1
pcm2: <HDA Realtek ALC888 PCM #1 Digital> at cad 0 nid 1 on hdac1
GEOM: ad4s1: geometry does not match label (255h,63s != 16h,63s).
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe7:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe7:ata0:0:0:0): CAM Status: SCSI Status Error
(probe7:ata0:0:0:0): SCSI Status: Check Condition
(probe7:ata0:0:0:0): NOT READY asc:3a,0
(probe7:ata0:0:0:0): Medium not present
(probe7:ata0:0:0:0): Unretryable error
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <Optiarc DVD RW AD-7530B NX02> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad4s1a
This module (opensolaris) contains code covered by the
Common Development and Distribution License (CDDL)
see http://opensolaris.org/os/licensing/opensolaris_license/
WARNING: ZFS is considered to be an experimental feature in FreeBSD.
ZFS filesystem version 13
ZFS storage pool version 13
wlan0: Ethernet address: 00:15:af:54:f6:25
wlan0: link state changed to UP
acpi_ec0: wait timed out (response), forcing polled mode

# pkg_info | grep "xorg\|xf86"
libXxf86dga-1.0.2   X DGA Extension
libXxf86misc-1.0.1  X XF86-Misc Extension
libXxf86vm-1.0.2    X Vidmode Extension
linux-xorg-libs-6.8.2_5 Xorg libraries, linux binaries
xf86-input-keyboard-1.3.2 X.Org keyboard input driver
xf86-input-mouse-1.4.0_3 X.Org mouse input driver
xf86-video-radeonhd-1.2.4_1 X.Org ati RadeonHD display driver
xf86-video-vesa-2.1.0 X.Org vesa display driver
xf86bigfontproto-1.1.2 XFree86-Bigfont extension headers
xf86dga-1.0.2_1     Test program for the XFree86-DGA extension
xf86dgaproto-2.0.3  XFree86-DGA extension headers
xf86driproto-2.0.4  XFree86-DRI extension headers
xf86miscproto-0.9.2 XFree86-Misc extension headers
xf86rushproto-1.1.2 XFree86-Rush extension headers
xf86vidmodeproto-2.2.2 XFree86-VidModeExtension extension headers
xorg-7.4            X.Org complete distribution metaport
xorg-apps-7.4_1     X.org apps meta-port
xorg-cf-files-1.0.2_3 X.org cf files for use with imake builds
xorg-docs-1.4,1     X.org documentation files
xorg-drivers-7.4    X.org drivers meta-port
xorg-fonts-100dpi-7.4 X.Org 100dpi bitmap fonts
xorg-fonts-7.4      X.org fonts meta-port
xorg-fonts-75dpi-7.4 X.Org 75dpi bitmap fonts
xorg-fonts-cyrillic-7.4 X.Org Cyrillic bitmap fonts
xorg-fonts-miscbitmaps-7.4 X.Org miscellaneous bitmap fonts
xorg-fonts-truetype-7.4 X.Org TrueType fonts
xorg-fonts-type1-7.4 X.Org Type1 fonts
xorg-libraries-7.4  X.org libraries meta-port
xorg-macros-1.2.1   X.Org development aclocal macros
xorg-server-1.5.3_4,1 X.Org X server and related programs




More information about the freebsd-bluetooth mailing list