Cannot pair Nokia E61

ml-vic ml-vic at de-martino.it
Thu Mar 22 21:17:07 UTC 2007


Unfortunately, after the modification  it still doesn't work
here you are the log of the session after the modification you suggested. I 
would like to pinpoint the following

1) l2control: Could not bind socket, bdaddr=00:12:d2:65:c2:03: Network is down

2) I was able to introduce the pin in my phone only after issuing:
hccontrol -n ubt0hci write_authentication_enable 1 
and
hccontrol -n ubt0hci read_authentication_enable

Nevertheless the phone still says that is unable to connect, to pair with 
NbBSD.domain  (ubt0)

Viao - Vittorio


Script started on Thu Mar 22 21:57:54 2007
NbBSD# /etc/rc.d/rc.bluetooth start ubt0

BD_ADDR: 00:11:f6:07:cb:b8
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 00 0x80 
<3-Slot> <5-Slot> <Encryption> <Slot offset>
<Timing accuracy> <Switch> <Hold mode> <Sniff mode>
<Park mode> <RSSI> <Channel quality> <SCO link>
<HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD>
<Paging scheme> <Power control> <Transparent SCO data>
<Unknown2.7> 
Max. ACL packet size: 384 bytes
Number of ACL packets: 8
Max. SCO packet size: 64 bytes
Number of SCO packets: 8
device {
        bdaddr  00:12:d2:65:c2:03;
        name    "NokiaVic";
        key     nokey;
        pin     "0000";
}
 hccontrol -n ubt0hci inquiry
BSD#  hccontrol -n ubt0hci inquiry

Inquiry result, num_responses=1
Inquiry result #0
	BD_ADDR: e61
	Page Scan Rep. Mode: 0x1
	Page Scan Period Mode: 0x2
	Page Scan Mode: 00
	Class: 50:02:0c
	Clock offset: 0x7bc9
Inquiry complete. Status: No error [00]
NbBSD# hccontrol -n ubt0hci remote_name_request e61
Status: Page timeout [0x4]

NbBSD# hccontrol -n ubt0hci create_connection e61

Status: Page timeout [0x4]
NbBSD#  hccontrol -n ubt0hci read_connection_list

Remote BD_ADDR    Handle Type Mode Role Encrypt Pending Queue State
NbBSD# l2ping -a e61

0 bytes from e61 seq_no=0 time=1113.650 ms result=0 
0 bytes from e61 seq_no=1 time=45.989 ms result=0 
0 bytes from e61 seq_no=2 time=59.159 ms result=0 
0 bytes from e61 seq_no=3 time=63.355 ms result=0 
^C

NbBSD# l2control -a e61 read_connection_list

l2control: Could not bind socket, bdaddr=00:12:d2:65:c2:03: Network is down
hccontrol -n ubt0hci write_authentication_enable 1
sNbBSD# hccontrol -n ubt0hci write_authentication_enable 1

NbBSD# shccontrol -n ubt0hci write_authentication_enable 1

NbBSD# hccontrol -n ubt0hci write_authentication_enable 1
[Krea
[4hd

Authentication Enable: Enabled [1]
NbBSD# exit

exit

Script done on Thu Mar 22 22:04:23 2007


Alle 15:19, giovedì 22 marzo 2007, Anton Stamenov ha scritto:
> Try to uncomment this line in /etc/rc.bluetooth script
>
>         # Enable this if you have trouble with accepting incomming
> connections. # By default we will try to perform role switch and become
> Master on # incomming connection (if local device supports it). Some
> devices # do not support role switch and thus incomming connection from
> such # devices will fail.
>
> #       ${hccontrol} -n ${dev}hci write_node_role_switch 0       || exit 1
>
> On Thu, 22 Mar 2007, ml-vic wrote:
> > I'm trying to connect my Nokia E61 (called 'e61' in /etc/bluetooth/host
> > and 'NokiaVic' in  /etc/bluetooth/hcsecd.conf, see below) to a laptop
> > with the latest 6.2 thru a usb bluetooth dongle.
> > The bottom line of it is that - form the E61 standpoint - the phone sees
> > the computer as 'NbBSD.dom (ubt0)', but it fails to pair upon
> > introduction of the pin 0000.
> > In rc.conf I enabled hcsecd.
> >
> > Here you are a detailed script ofa long useless session (I'm connected as
> > root) that for an expert can be useful to understand what's wrong with
> > it.
> >
> > Please help.
> > Ciao from Rome - Vittorio
> >
> > Script started on Thu Mar 22 14:00:43 2007
> >
> > NbBSD# /etc/rc.bluetooth start ubt0
> > BD_ADDR: 00:11:f6:07:cb:b8
> > Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 00 0x80
> > <3-Slot> <5-Slot> <Encryption> <Slot offset>
> > <Timing accuracy> <Switch> <Hold mode> <Sniff mode>
> > <Park mode> <RSSI> <Channel quality> <SCO link>
> > <HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD>
> > <Paging scheme> <Power control> <Transparent SCO data>
> > <Unknown2.7>
> > Max. ACL packet size: 384 bytes
> > Number of ACL packets: 8
> > Max. SCO packet size: 64 bytes
> > Number of SCO packets: 8
> >
> > NbBSD# cat /etc/bluetooth/hcsecd.conf
> > device {
> >         bdaddr  00:11:f6:07:c8:b8;
> >         name    "CompaqPC";
> >         key     nokey;
> >         pin     "0000";
> > }
> >
> > device {
> >         bdaddr  00:12:d2:65:c2:03;
> >         name    "NokiaVic";
> >         key     nokey;
> >         pin     "0000";
> > }
> > NbBSD# cat /etc/bluetooth/hcsecd.conf /etc/bluetooth/hcsecd.conf
> >
> > # BD_ADDR               Name [ alias0 alias1 ... ]
> > # **localhost**
> > 00:11:f6:07:c8:b8	compaq
> > #The Nokia E61 cell
> > 00:12:d2:65:c2:03	e61
> > NbBSD# usbdevs -v -d
> >
> > Controller /dev/usb0:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > Intel(0x0000), rev 1.00
> >   uhub0
> >  port 1 addr 2: full speed, self powered, config 1, product
> > 0x4482(0x4482), vendor 0x04b3(0x04b3), rev 0.00
> >    uhub3
> >   port 1 powered
> >   port 2 powered
> >   port 3 powered
> >   port 4 powered
> >  port 2 powered
> > Controller /dev/usb1:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > Intel(0x0000), rev 1.00
> >   uhub1
> >  port 1 powered
> >  port 2 addr 2: full speed, self powered, config 1, product
> > 0x0001(0x0001), vendor 0x0a12(0x0a12), rev 19.58
> >    ubt0
> > Controller /dev/usb2:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
> > Intel(0x0000), rev 1.00
> >   uhub2
> >  port 1 powered
> >  port 2 powered
> > Controller /dev/usb3:
> > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> > NEC(0x0000), rev 1.00
> >   uhub4
> >  port 1 powered
> > Controller /dev/usb4:
> > addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
> > NEC(0x0000), rev 1.00
> >   uhub5
> >  port 1 addr 2: full speed, power 100 mA, config 1, Fusion UMTS
> > Quad-GPRS(0x6300), Option N.V.(0x0af0), rev 0.00
> >    ucom0
> >
> > NbBSD# hccontrol -n ubt0hci inquiry
> >
> > Inquiry result, num_responses=1
> > Inquiry result #0
> > 	BD_ADDR: e61
> > 	Page Scan Rep. Mode: 0x1
> > 	Page Scan Period Mode: 0x2
> > 	Page Scan Mode: 00
> > 	Class: 50:02:0c
> > 	Clock offset: 0xf48
> > Inquiry complete. Status: No error [00]
> >
> > NbBSD# hccontrol -n ubt0hci remote_name_request
> > BD_ADDR: e61
> > Name: NokiaVic
> >
> > NbBSD# hccontrol -n ubt0hci create_connection e61
> > BD_ADDR: e61
> > Connection handle: 42
> > Encryption mode: Disabled [0]
> >
> > NbBSD# hccontrol -n ubt0hci read_connection_list
> > Remote BD_ADDR    Handle Type Mode Role Encrypt Pending Queue State
> >
> > NbBSD# hccontrol -n ubt0hci create_connection NokiaVic
> > 00:12:d2:65:c2:03
> > BD_ADDR: e61
> > Connection handle: 42
> > Encryption mode: Disabled [0]
> >
> > NbBSD# hccontrol -n ubt0hci read_connection_list
> > Remote BD_ADDR    Handle Type Mode Role Encrypt Pending Queue State
> >
> > NbBSD# hccontrol -n ubt0hci get_link_quality 42
> > Status: No connection [0x2]
> >
> > NbBSD# l2ping -a e61
> > 0 bytes from e61 seq_no=0 time=1430.404 ms result=0
> > 0 bytes from e61 seq_no=1 time=60.359 ms result=0
> > 0 bytes from e61 seq_no=2 time=58.552 ms result=0
> > 0 bytes from e61 seq_no=3 time=61.747 ms result=0
> > ^C
> >
> > NbBSD# l2control -a e61 read_connection_list
> > l2control: Could not bind socket, bdaddr=00:12:d2:65:c2:03: Network is
> > down
> >
> > NbBSD# hccontrol -n ubt0hci write_authentication_enable 1
> >
> > NbBSD# hccontrol -n ubt0hci write_authentication_enable l
> > Authentication Enable: Enabled [1]
> >
> > NbBSD# sdpcontrol -a e61 browse
> >
> > Record Handle: 0x00010000
> > Service Class ID List:
> > 	A/V Remote Control (0x110e)
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 		Protocol specific parameter #1: u/int/uuid16 23
> > 	AVCTP (0x0017)
> > 		Protocol specific parameter #1: u/int/uuid16 256
> > 		Protocol specific parameter #2: u/int/uuid16 3840
> >
> > Record Handle: 0x00010001
> > Service Class ID List:
> > 	OBEX Object Push (0x1105)
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 9
> > 	OBEX (0x0008)
> > Bluetooth Profile Descriptor List:
> > 	OBEX Object Push (0x1105) ver. 1.0
> >
> > Record Handle: 0x00010002
> > Service Class ID List:
> > 	Dial-Up Networking (0x1103)
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 2
> > Bluetooth Profile Descriptor List:
> > 	Dial-Up Networking (0x1103) ver. 1.0
> >
> > Record Handle: 0x00010003
> > Service Class ID List:
> > Invalid Service Class ID List. Not a UUID, type=0x35
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 1
> >
> > Record Handle: 0x00010006
> > Service Class ID List:
> > 	Imaging Responder (0x111b)
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 15
> > 	OBEX (0x0008)
> > Bluetooth Profile Descriptor List:
> > 	Imaging (0x111a) ver. 1.0
> >
> > Record Handle: 0x00010007
> > Service Class ID List:
> > 	0x00000002-0000-1000-8000-0002ee000002
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 10
> > 	OBEX (0x0008)
> > Bluetooth Profile Descriptor List:
> > 	0x00000002-0000-1000-8000-0002ee000002 ver. 1.0
> >
> > Record Handle: 0x00010008
> > Service Class ID List:
> > 	OBEX File Transfer (0x1106)
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 11
> > 	OBEX (0x0008)
> > Bluetooth Profile Descriptor List:
> > 	OBEX File Transfer (0x1106) ver. 1.0
> >
> > Record Handle: 0x00010009
> > Service Class ID List:
> > 	0x00005005-0000-1000-8000-0002ee000001
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 12
> > 	OBEX (0x0008)
> > Bluetooth Profile Descriptor List:
> > 	0x00005005-0000-1000-8000-0002ee000001 ver. 1.0
> >
> > Record Handle: 0x0001000a
> > Service Class ID List:
> > 	0x00000004-0000-1000-8000-0002ee000002
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 13
> > 	OBEX (0x0008)
> > Bluetooth Profile Descriptor List:
> > 	0x00000004-0000-1000-8000-0002ee000002 ver. 1.0
> >
> > Record Handle: 0x0001000b
> > Service Class ID List:
> > 	0x00005601-0000-1000-8000-0002ee000001
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 14
> > 	OBEX (0x0008)
> > Bluetooth Profile Descriptor List:
> > 	0x00005601-0000-1000-8000-0002ee000001 ver. 1.0
> >
> > Record Handle: 0x0001000c
> > Service Class ID List:
> > 	SIM Access (0x112d)
> > 	Generic Telephony (0x1204)
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 8
> > Bluetooth Profile Descriptor List:
> > 	SIM Access (0x112d) ver. 1.1
> >
> > Record Handle: 0x0001000d
> > Service Class ID List:
> > 	Handsfree Audio Gateway (0x111f)
> > 	Generic Audio (0x1203)
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 28
> > Bluetooth Profile Descriptor List:
> > 	Handsfree Audio Gateway (0x111f) ver. 1.1
> >
> > Record Handle: 0x0001000e
> > Service Class ID List:
> > 	Headset Audio Gateway (0x1112)
> > 	Generic Audio (0x1203)
> > Protocol Descriptor List:
> > 	L2CAP (0x0100)
> > 	RFCOMM (0x0003)
> > 		Protocol specific parameter #1: u/int8/bool 29
> > Bluetooth Profile Descriptor List:
> > 	Headset (0x1108) ver. 1.0
> > Script done on Thu Mar 22 14:22:04 2007
> >
> > _______________________________________________
> > freebsd-bluetooth at freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-bluetooth
> > To unsubscribe, send any mail to
> > "freebsd-bluetooth-unsubscribe at freebsd.org"


More information about the freebsd-bluetooth mailing list