Cannot pair Nokia E61
ml-vic
ml-vic at de-martino.it
Thu Mar 22 14:34:34 UTC 2007
I'm trying to connect my Nokia E61 (called 'e61' in /etc/bluetooth/host
and 'NokiaVic' in /etc/bluetooth/hcsecd.conf, see below) to a laptop with
the latest 6.2 thru a usb bluetooth dongle.
The bottom line of it is that - form the E61 standpoint - the phone sees the
computer as 'NbBSD.dom (ubt0)', but it fails to pair upon introduction of the
pin 0000.
In rc.conf I enabled hcsecd.
Here you are a detailed script ofa long useless session (I'm connected as
root) that for an expert can be useful to understand what's wrong with it.
Please help.
Ciao from Rome - Vittorio
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Script started on Thu Mar 22 14:00:43 2007
NbBSD# /etc/rc.bluetooth start ubt0
BD_ADDR: 00:11:f6:07:cb:b8
Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 00 0x80
<3-Slot> <5-Slot> <Encryption> <Slot offset>
<Timing accuracy> <Switch> <Hold mode> <Sniff mode>
<Park mode> <RSSI> <Channel quality> <SCO link>
<HV2 packets> <HV3 packets> <u-law log> <A-law log> <CVSD>
<Paging scheme> <Power control> <Transparent SCO data>
<Unknown2.7>
Max. ACL packet size: 384 bytes
Number of ACL packets: 8
Max. SCO packet size: 64 bytes
Number of SCO packets: 8
NbBSD# cat /etc/bluetooth/hcsecd.conf
device {
bdaddr 00:11:f6:07:c8:b8;
name "CompaqPC";
key nokey;
pin "0000";
}
device {
bdaddr 00:12:d2:65:c2:03;
name "NokiaVic";
key nokey;
pin "0000";
}
NbBSD# cat /etc/bluetooth/hcsecd.conf /etc/bluetooth/hcsecd.conf
# BD_ADDR Name [ alias0 alias1 ... ]
# **localhost**
00:11:f6:07:c8:b8 compaq
#The Nokia E61 cell
00:12:d2:65:c2:03 e61
NbBSD# usbdevs -v -d
Controller /dev/usb0:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
uhub0
port 1 addr 2: full speed, self powered, config 1, product 0x4482(0x4482),
vendor 0x04b3(0x04b3), rev 0.00
uhub3
port 1 powered
port 2 powered
port 3 powered
port 4 powered
port 2 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
uhub1
port 1 powered
port 2 addr 2: full speed, self powered, config 1, product 0x0001(0x0001),
vendor 0x0a12(0x0a12), rev 19.58
ubt0
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000),
Intel(0x0000), rev 1.00
uhub2
port 1 powered
port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
NEC(0x0000), rev 1.00
uhub4
port 1 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, OHCI root hub(0x0000),
NEC(0x0000), rev 1.00
uhub5
port 1 addr 2: full speed, power 100 mA, config 1, Fusion UMTS
Quad-GPRS(0x6300), Option N.V.(0x0af0), rev 0.00
ucom0
NbBSD# hccontrol -n ubt0hci inquiry
Inquiry result, num_responses=1
Inquiry result #0
BD_ADDR: e61
Page Scan Rep. Mode: 0x1
Page Scan Period Mode: 0x2
Page Scan Mode: 00
Class: 50:02:0c
Clock offset: 0xf48
Inquiry complete. Status: No error [00]
NbBSD# hccontrol -n ubt0hci remote_name_request
BD_ADDR: e61
Name: NokiaVic
NbBSD# hccontrol -n ubt0hci create_connection e61
BD_ADDR: e61
Connection handle: 42
Encryption mode: Disabled [0]
NbBSD# hccontrol -n ubt0hci read_connection_list
Remote BD_ADDR Handle Type Mode Role Encrypt Pending Queue State
NbBSD# hccontrol -n ubt0hci create_connection NokiaVic
00:12:d2:65:c2:03
BD_ADDR: e61
Connection handle: 42
Encryption mode: Disabled [0]
NbBSD# hccontrol -n ubt0hci read_connection_list
Remote BD_ADDR Handle Type Mode Role Encrypt Pending Queue State
NbBSD# hccontrol -n ubt0hci get_link_quality 42
Status: No connection [0x2]
NbBSD# l2ping -a e61
0 bytes from e61 seq_no=0 time=1430.404 ms result=0
0 bytes from e61 seq_no=1 time=60.359 ms result=0
0 bytes from e61 seq_no=2 time=58.552 ms result=0
0 bytes from e61 seq_no=3 time=61.747 ms result=0
^C
NbBSD# l2control -a e61 read_connection_list
l2control: Could not bind socket, bdaddr=00:12:d2:65:c2:03: Network is down
NbBSD# hccontrol -n ubt0hci write_authentication_enable 1
NbBSD# hccontrol -n ubt0hci write_authentication_enable l
Authentication Enable: Enabled [1]
NbBSD# sdpcontrol -a e61 browse
Record Handle: 0x00010000
Service Class ID List:
A/V Remote Control (0x110e)
Protocol Descriptor List:
L2CAP (0x0100)
Protocol specific parameter #1: u/int/uuid16 23
AVCTP (0x0017)
Protocol specific parameter #1: u/int/uuid16 256
Protocol specific parameter #2: u/int/uuid16 3840
Record Handle: 0x00010001
Service Class ID List:
OBEX Object Push (0x1105)
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 9
OBEX (0x0008)
Bluetooth Profile Descriptor List:
OBEX Object Push (0x1105) ver. 1.0
Record Handle: 0x00010002
Service Class ID List:
Dial-Up Networking (0x1103)
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 2
Bluetooth Profile Descriptor List:
Dial-Up Networking (0x1103) ver. 1.0
Record Handle: 0x00010003
Service Class ID List:
Invalid Service Class ID List. Not a UUID, type=0x35
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 1
Record Handle: 0x00010006
Service Class ID List:
Imaging Responder (0x111b)
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 15
OBEX (0x0008)
Bluetooth Profile Descriptor List:
Imaging (0x111a) ver. 1.0
Record Handle: 0x00010007
Service Class ID List:
0x00000002-0000-1000-8000-0002ee000002
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 10
OBEX (0x0008)
Bluetooth Profile Descriptor List:
0x00000002-0000-1000-8000-0002ee000002 ver. 1.0
Record Handle: 0x00010008
Service Class ID List:
OBEX File Transfer (0x1106)
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 11
OBEX (0x0008)
Bluetooth Profile Descriptor List:
OBEX File Transfer (0x1106) ver. 1.0
Record Handle: 0x00010009
Service Class ID List:
0x00005005-0000-1000-8000-0002ee000001
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 12
OBEX (0x0008)
Bluetooth Profile Descriptor List:
0x00005005-0000-1000-8000-0002ee000001 ver. 1.0
Record Handle: 0x0001000a
Service Class ID List:
0x00000004-0000-1000-8000-0002ee000002
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 13
OBEX (0x0008)
Bluetooth Profile Descriptor List:
0x00000004-0000-1000-8000-0002ee000002 ver. 1.0
Record Handle: 0x0001000b
Service Class ID List:
0x00005601-0000-1000-8000-0002ee000001
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 14
OBEX (0x0008)
Bluetooth Profile Descriptor List:
0x00005601-0000-1000-8000-0002ee000001 ver. 1.0
Record Handle: 0x0001000c
Service Class ID List:
SIM Access (0x112d)
Generic Telephony (0x1204)
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 8
Bluetooth Profile Descriptor List:
SIM Access (0x112d) ver. 1.1
Record Handle: 0x0001000d
Service Class ID List:
Handsfree Audio Gateway (0x111f)
Generic Audio (0x1203)
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 28
Bluetooth Profile Descriptor List:
Handsfree Audio Gateway (0x111f) ver. 1.1
Record Handle: 0x0001000e
Service Class ID List:
Headset Audio Gateway (0x1112)
Generic Audio (0x1203)
Protocol Descriptor List:
L2CAP (0x0100)
RFCOMM (0x0003)
Protocol specific parameter #1: u/int8/bool 29
Bluetooth Profile Descriptor List:
Headset (0x1108) ver. 1.0
Script done on Thu Mar 22 14:22:04 2007
More information about the freebsd-bluetooth
mailing list