RPi4B: modern firmware vs. Device tree loaded to 0x4000 (size 0xbe0c) [fails] vs. to 0x1f0000 (size 0xbd90) [works]?

[Klaus Cucinauomo]

> Am 11.10.2020 um 15:38 schrieb Robert Crowston <crowston at protonmail.com>:
> 
> (I have not tried updating u-boot yet.) … All I did was remove the device_tree_address=0x4000 from config.txt.

In boot 2020.10 the whole armstubs-stuff should or has to be removed when using modern firmware
so 
….MESS:00:00:08.221028:0: Loading ‚armstub8-gic.bin' to 0x0 size 0x1700...
will result in a hdmi-rainbow - screen - hang ( or console-hang)(`ve tested it with your removed device_tree_address=0x4000 also(still hangs))
If you want to test I`ve uploaded the u-boot2020.10 to spare you some compile-time on your nice weekend ;-) :
https://wiki.freebsd.org/arm/Raspberry%20Pi#RPI4
(Best to test directly boot from SSD because that’s the purpose to upgrade u-boot)

Regards

K.