Kmod driver at iicbus. attach() and config_intrhook(9)

[John-Mark Gurney]

Andriy Gapon wrote this message on Wed, Aug 26, 2020 at 23:55 +0300:
> On 25/08/2020 23:33, John-Mark Gurney wrote:
> > Andriy Gapon wrote this message on Tue, Aug 25, 2020 at 10:21 +0300:
> >> On 24/08/2020 23:47, John-Mark Gurney wrote:
> >>> What driver is used for i2c on the Orange?  I've tried to firgure it
> >>> out from dts + source, but it isn't clear.
> >>
> >> a10_twsi
> > 
> > Thanks.  And this explains why I couldn't find it in arm/allwinner.. :)
> > 
> > Yeah, this is using bus_generic_attach...
> > 
> > But it looks like it supports interruptless operation.  Is there a flag
> > for when interrupts are enabled?
> > 
> > Because the check in sys/dev/iicbus/twsi/twsi.c:twsi_transfer could be
> > changed from:
> >         if (sc->have_intr == false)
> > 
> > to:
> >         if (sc->have_intr == false || interrupts_not_enabled)
> > 
> > And that could fix things.
> > 
> 
> sc->have_intr is already enabled from the interrupt enable hook.

But that only detects if the interrupt are used, NOT that they are
currently active and working which the "|| cold" would provide...

-- 
  John-Mark Gurney				Voice: +1 415 225 5579

     "All that I will do, has been done, All that I have, has not."