GoFlexHome not booting from disk

[Balanga Bar]

I got my U-Boot from the doozan list - https://forum.doozan.com/list.php?3.
It is one which includes the U-Boot API.

By goflexhome_defconfig do you mean this?

https://github.com/sbabic/u-boot-imx/blob/master/configs/goflexhome_defconfig

I've never heard of it and don't know how it works.

Are there any instructions?

On Wed, May 22, 2019 at 11:41 PM James Shuriff <james at opentech.cc> wrote:

> U-Boot supports many different boards through “defconfigs”. The
> goflexhome_defconfig sets up U-Boot to build for GoFlexHome. How did you
> build/acquire U-Boot?
>
>
>
> - James Shuriff
>
>
>
> *From:* Balanga Bar <balanga.bar at gmail.com>
> *Sent:* Wednesday, May 22, 2019 6:20 PM
> *To:* James Shuriff <james at opentech.cc>
> *Cc:* freebsd-arm at freebsd.org
> *Subject:* Re: GoFlexHome not booting from disk
>
>
>
> Not sure what goflexhome_defconfig is - can't say I've ever heard of it.
>
>
>
> I'm using DOCKSTAR.
>
>
>
> On Wed, May 22, 2019 at 11:14 PM James Shuriff <james at opentech.cc> wrote:
>
> What kernconf are you using? I assume you built U-Boot using
> goflexhome_defconfig.
>
> - James Shuriff
>
> -----Original Message-----
> From: owner-freebsd-arm at freebsd.org <owner-freebsd-arm at freebsd.org> On
> Behalf Of Balanga Bar
> Sent: Wednesday, May 22, 2019 6:02 PM
> To: freebsd-arm at freebsd.org
> Subject: GoFlexHome not booting from disk
>
> I've managed to build FreeBSD 11.1 for armv5 so that I can boot up my
> GoFlex Home from USB but when I copy the same files to a hard disk it will
> not boot.
>
> Could anyone suggest what I need to check?
>
> I have logs for both instances and can display them if necessary, but the
> main difference is the when attempting to boot from USB I get the
> following:-
>
> ***********************************   USB
> ************************************************************
>
> Initializing devices...
> starting USB...
> USB0:   USB EHCI 1.00
> scanning bus 0 for devices... 2 USB Device(s) found
>        scanning usb for storage devices....
> Use USB retry period from the environment: 15 second(s)
> 1 Storage Device(s) found
>
> Reset IDE: ide_preinit failed
> Loading envs from usb 0...
> reading /boot/uEnv.txt
> 146 bytes read in 63 ms (2 KiB/s)
> ... envs loaded
> importing envs ...
>
> reading ubldr
> 295973 bytes read in 85 ms (3.3 MiB/s)
> ## Starting application at 0x01000098 ...
> Consoles: U-Boot console..
> Compatible U-Boot API signature found @0x7b12860
>
> FreeBSD/arm U-Boot loader, Revision 1.2
> (Thu Nov 30 14:06:37 GMT 2017 root at Test)
>
> DRAM: 128MB
> Number of U-Boot devices: 2
> U-Boot env: loaderdev not set, will probe all devices.
> Found U-Boot device: disk
>   Probing all disk devices...
>   Checking unit=0 slice=<auto> partition=<auto>... good.
> Booting from disk0s2a:
>
> ***********************************   IDE
> ************************************************************
> Initializing devices...
> starting USB...
> USB0:   USB EHCI 1.00
> canning bus 0 for devices... 1 USB Device(s) found
>        scanning usb for storage devices... 0 Storage Device(s) found
>
> Reset IDE: Bus 0: .OK Bus 1: not available..
>   Device 0: Model: HTS541020G9SA00  Firm: MB1OC60J Ser#: MPBAL0X1C5LD1M
>             Type: Hard Disk
>             Supports 48-bit addressing
>             Capacity: 19077.1 MB = 18.6 GB (39070080 x 512) Loading envs
> from ide 0...
> reading /boot/uEnv.txt
> 134 bytes read in 46 ms (2 KiB/s)
> ... envs loaded
> importing envs ...
>
> * Bad device ide 1 **
> reading ubldr
> 295973 bytes read in 140 ms (2 MiB/s)
> ## Starting application at 0x01000098 ...
> Consoles: U-Boot console
> Compatible U-Boot API signature found @0x7b12860
>
> FreeBSD/arm U-Boot loader, Revision 1.2
> (Thu Nov 30 14:06:37 GMT 2017 root at Test)
>
> DRAM: 128MB
> Number of U-Boot devices: 1
> U-Boot env: loaderdev not set, will probe all devices.
> Found U-Boot device: net
> Booting from net0:
>
> can't load 'kernel'
>
>
> ******************************************************************************************************
>
> Not sure why it doesn't identify the IDE disk as a U-Boot device....
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
> ________________________________
>  DISCLAIMER: This message and any attachments are intended solely for the
> use of the recipient and may contain confidential information. If you have
> received this message in error please delete it and promptly notify the
> sender, James Shuriff (james at opentech.cc<mailto:james at opentech.cc>).
>
> ------------------------------
> DISCLAIMER: This message and any attachments are intended solely for the
> use of the recipient and may contain confidential information. If you have
> received this message in error please delete it and promptly notify the
> sender, James Shuriff (james at opentech.cc).
>