Compiling u-boot-rpi3 on an rpi3

[James Shuriff]

Bob,

Which version of FreeBSD are you running? What is the output of `uname -p`? The Das U-Boot tools (where your issue is) are compiled using the host system's toolchain.

- James Shuriff
Managing Member
OpenTech.cc LLC
Direct #: +1 631 333 7437
Main #: +1 631 333 7260

-----Original Message-----
From: bob prohaska <fbsd at www.zefox.net>
Sent: Sunday, May 5, 2019 10:16 PM
To: James Shuriff <james at opentech.cc>
Cc: bob prohaska <fbsd at www.zefox.net>
Subject: Re: Compiling u-boot-rpi3 on an rpi3

Hi James,

That seems rather drastic. I'd like to stay within the ports system since this isn't a "must do" situation. At one time building u-boot on an rpi worked, though that was a while ago.

Thanks for writing!

bob prohaska

On Mon, May 06, 2019 at 02:08:34AM +0000, James Shuriff wrote:
> Try building it directly from the repo. This is how I build for rpi3:
>
> Clone the git repo https://github.com/u-boot/u-boot
>
> In configs/rpi_3_defconfig:
> * Change CONFIG_OF_EMBED=y to CONFIG_OF_EMBED =n
> * Add CONFIG_OF_BOARD=y
> * Change CONFIG_ENV_FAT_DEVICE_AND_PART="0:1" to CONFIG_ENV_FAT_DEVICE_AND_PART="1:1"
>
> Make sure you have the aarch64-none-elf-gcc package.
>
> Use these commands to build:
> gmake CROSS_COMPILE=aarch64-none-elf- rpi_3_defconfig gmake
> CROSS_COMPILE=aarch64-none-elf- u-boot.bin
>
> - James Shuriff
>
> -----Original Message-----
> From: owner-freebsd-arm at freebsd.org <owner-freebsd-arm at freebsd.org> On
> Behalf Of bob prohaska
> Sent: Sunday, May 5, 2019 10:01 PM
> To: freebsd-arm at freebsd.org; freebsd-ports at freebsd.org
> Subject: Compiling u-boot-rpi3 on an rpi3
>
> With FreeBSD at r347055 and ports at 500862 attempts to compile
> sysutils/u-boot-rpi3 stop with a string of errors starting with
> ld: error: undefined symbol: EVP_MD_CTX_new
> >>> referenced by mxsimage.c
> >>>               tools/mxsimage.o:(mxsimage_generate)
>
> ld: error: undefined symbol: EVP_MD_CTX_free
> >>> referenced by mxsimage.c
> >>>               tools/mxsimage.o:(mxsimage_generate)
>
> ld: error: undefined symbol: EVP_MD_CTX_new
> >>> referenced by mxsimage.c
> >>>               tools/mxsimage.o:(mxsimage_generate)
>
> ld: error: undefined symbol: EVP_CIPHER_CTX_reset
> >>> referenced by mxsimage.c
> >>>               tools/mxsimage.o:(mxsimage_generate)
>
> Is there a fix or workaround?
>
> Thanks for reading,
>
> bob prohaska
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
> ________________________________
>  DISCLAIMER: This message and any attachments are intended solely for the use of the recipient and may contain confidential information. If you have received this message in error please delete it and promptly notify the sender, James Shuriff (james at opentech.cc<mailto:james at opentech.cc>).
>
________________________________
 DISCLAIMER: This message and any attachments are intended solely for the use of the recipient and may contain confidential information. If you have received this message in error please delete it and promptly notify the sender, James Shuriff (james at opentech.cc<mailto:james at opentech.cc>).