u-boot 2018-09 and nano pi air

[Luc Hondareyte]

Le 11/11/2018 à 15:41, Emmanuel Vadot a écrit :
>   Hello,
>
> On Sun, 11 Nov 2018 12:44:25 +0100
> Luc Hondareyte via freebsd-arm <freebsd-arm at freebsd.org> wrote:
>
>> Hello,
>>
>> I just tested generics images 12-BETA4 and 13-CURRENT (r340239) with
>> u-boot 2018-09 package for nanopi-neo-air. Apparently, the USB stack
>> does not work with this release. However, this works with the 2018-09
>> version for nano-pi-neo (not air). I did not have this problem with the
>> 2018-03 version.
>   I doubt that this worked since there is only an otg port and u-boot
> (and FreeBSD) doesn't support this.
>
You made me doubt. I just retry with u-boot 2018-03 (neo air), and 
actually, the ports do not work. They work with u-boot for neopi. I am 
talking about the two USB ports on the header, not the OTG port.
>> U-Boot SPL 2018.09 (Oct 22 2018 - 20:09:02 +0000)
>> DRAM: 512 MiB
>> Trying to boot from MMC1
>>
>>
>> U-Boot 2018.09 (Oct 22 2018 - 20:09:02 +0000) Allwinner Technology
>>
>> CPU:   Allwinner H3 (SUN8I 1680)
>> Model: FriendlyARM NanoPi NEO Air
>> DRAM:  512 MiB
>> MMC:   SUNXI SD/MMC: 0
>> Loading Environment from FAT... *** Warning - bad CRC, using default
>> environment
>>
>> In:    serial
>> Out:   serial
>> Err:   serial
>> Net:   No ethernet found.
>> starting USB...
>> No controllers found
>> Hit any key to stop autoboot:  0
>> => usb info
>> USB is stopped. Please issue 'usb start' first.
>> => usb start
>> starting USB...
>> No controllers found
>>
>> Another question, what is the status for the eMMC for this board. Here
>> is the dmesg with 13-CURRENT r340239:
>   There is no eMMC defined in the board DTS so it doesn't get probed.
>
Ok, thanks