eMMC issues on Allwiner A20-OLinuXino-LIME2-eMMC
Jookia
166291 at gmail.com
Thu Nov 8 06:40:07 UTC 2018
Hi there,
I've been working on getting FreeBSD to run on Olimex's LIME2 board.
Unfortunately I'm having some trouble when booting it with the eMMC
device tree.
The eMMC card (mmc1, 4GB) keeps giving off
AW_MMC_INT_RESP_TIMEOUT while the SD card (mmc0, 32GB) works fine.
I've looked through the source code for the driver but it's over my
head, so I was wondering if anyone here knows what's going on?
I tested the eMMC and it works fine in Linux and OpenBSD.
Jookia.
-------------- next part --------------
aw_mmc0: Powering up sd/mmc
mmc0: Probing bus
mmc0: REQUEST: CMD0 arg 0 flags 0x40
ugen0.1: <Allwinner EHCI root HUB> at usbus0
uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Generic OHCI root HUB> at usbus1
uhub1: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Allwinner EHCI root HUB> at usbus2
uhub2: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Generic OHCI root HUB> at usbus3
uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ahcich0: AHCI reset...
ahcich0: SATA connect timeout time=10000us status=00000000
ahcich0: AHCI reset: device not found
mmc0: REQUEST: CMD8 arg 0x1aa flags 0x75
mmc0: SD 2.0 interface conditions: OK
mmc0: REQUEST: CMD55 arg 0 flags 0x15
mmc0: REQUEST: CMD41 arg 0 flags 0x61
mmc0: SD probe: OK (OCR: 0x00ff8000)
mmc0: REQUEST: CMD0 arg 0 flags 0x40
mmc0: Current OCR: 0x00ff8000
mmc0: REQUEST: CMD8 arg 0x1aa flags 0x75
mmc0: REQUEST: CMD55 arg 0 flags 0x15
mmc0: REQUEST: CMD41 arg 0x40ff8000 flags 0x61
mmc0: REQUEST: CMD55 arg 0 flags 0x15
mmc0: REQUEST: CMD41 arg 0x40ff8000 flags 0x61
mmc0: Probing cards
mmc0: REQUEST: CMD2 arg 0 flags 0x67
mmc0: New card detected (CID 015041534433324730010a34d80112ef)
mmc0: REQUEST: CMD3 arg 0 flags 0x75
mmc0: REQUEST: CMD9 arg 0x70000 flags 0x67
mmc0: New card detected (CSD 400e00325b590000e68f7f800a400019)
mmc0: REQUEST: CMD13 arg 0x70000 flags 0x15
mmc0: REQUEST: CMD7 arg 0x70000 flags 0x1d
mmc0: REQUEST: CMD55 arg 0x70000 flags 0x15
mmc0: REQUEST: CMD51 arg 0 flags 0x35 data 8
mmc0: REQUEST: CMD6 arg 0xffffff flags 0x35 data 64
mmc0: REQUEST: CMD7 arg 0 flags 0
mmc0: REQUEST: CMD7 arg 0x70000 flags 0x1d
mmc0: REQUEST: CMD55 arg 0x70000 flags 0x15
mmc0: REQUEST: CMD13 arg 0 flags 0x35 data 64
mmc0: Card at relative address 0x0007 added:
mmc0: card: SDHC SD32G 3.0 SN 010A34D8 MFG 02/2017 by 1 PA
mmc0: quirks: 0
mmc0: bus: 4bit, 50MHz (high speed timing)
mmc0: memory: 60440576 blocks, erase sector 8192 blocks
mmc0: REQUEST: CMD7 arg 0 flags 0
mmc0: REQUEST: CMD7 arg 0x70000 flags 0x1d
mmc0: REQUEST: CMD7 arg 0 flags 0
mmc0: setting transfer rate to 50.000MHz (high speed timing)
mmc0: REQUEST: CMD7 arg 0x70000 flags 0x1d
mmc0: REQUEST: CMD6 arg 0x80fffff1 flags 0x35 data 64
mmc0: REQUEST: CMD7 arg 0 flags 0
mmcsd0: 31GB <SDHC SD32G 3.0 SN 010A34D8 MFG 02/2017 by 1 PA> at mmc0 50.0MHz/4bit/32768-block
aw_mmc1: Powering up sd/mmc
mmc1: Probing bus
mmc1: REQUEST: CMD0 arg 0 flags 0x40
uhub1: 1 port with 1 removable, self powered
uhub3: 1 port with 1 removable, self powered
mmc1: REQUEST: CMD8 arg 0x1aa flags 0x75
GEOM: new disk mmcsd0
aw_mmc1: error rint: 0x00000104
AW_MMC_INT_RESP_TIMEOUT
mmc1: CMD8 RESULT: 1
mmc1: REQUEST: CMD8 arg 0x1aa flags 0x75
aw_mmc1: error rint: 0x00000100
AW_MMC_INT_RESP_TIMEOUT
mmc1: CMD8 RESULT: 1
mmc1: REQUEST: CMD8 arg 0x1aa flags 0x75
mmc0: REQUEST: CMD7 arg 0x70000 flags 0x1daw_mmc1: error rint: 0x00000104
AW_MMC_INT_RESP_TIMEOUT
mmc0: setting bus width to 4 bits high speed timing
mmc0: REQUEST: CMD55 arg 0x70000 flags 0x15
mmc0: REQUEST: CMD42 arg 0 flags 0x15
mmc1: CMD8 RESULT: 1
mmc1: REQUEST: CMD8 arg 0x1aa flags 0x75
mmc0: REQUEST: CMD55 arg 0x70000 flags 0x15aw_mmc1: error rint: 0x00000104
AW_MMC_INT_RESP_TIMEOUT
mmc1: CMD8 RESULT: 1
mmc1: REQUEST: CMD55 arg 0 flags 0x15
mmc0: REQUEST: CMD6 arg 0x2 flags 0x15aw_mmc1: error rint: 0x00000104
AW_MMC_INT_RESP_TIMEOUT
mmc0: Failed to set VCCQ for card at relative address 7
mmc0: REQUEST: CMD17 arg 0x1 flags 0x35 data 512
mmc1: CMD55 RESULT: 1
mmc1: REQUEST: CMD55 arg 0 flags 0x15
mmc0: REQUEST: CMD17 arg 0 flags 0x35aw_mmc1: error rint: 0x00000104
AW_MMC_INT_RESP_TIMEOUT
data 512
mmc1: CMD55 RESULT: 1
mmc1: REQUEST: CMD55 arg 0 flags 0x15
mmc0: REQUEST: CMD17 arg 0x1 flags 0x35aw_mmc1: error rint: 0x00000104
AW_MMC_INT_RESP_TIMEOUT
data 512
mmc1: CMD55 RESULT: 1
mmc1: REQUEST: CMD55 arg 0 flags 0x15
mmc0: REQUEST: CMD17 arg 0x39a3fff flags 0x35aw_mmc1: error rint: 0x00000104
AW_MMC_INT_RESP_TIMEOUT
data 512
mmc1: CMD55 RESULT: 1
mmc1: SD probe: failed
mmc1: REQUEST: CMD1 arg 0 flags 0x61
mmc0: REQUEST: CMD17 arg 0 flags 0x35 data 512
mmc1: MMC probe: OK (OCR: 0x00ff8080)
mmc1: REQUEST: CMD0 arg 0 flags 0x40
mmc0: REQUEST: CMD17 arg 0 flags 0x35 data 512
mmc1: Current OCR: 0x00ff8080
mmc1: REQUEST: CMD1 arg 0x40ff8080 flags 0x61
GEOM_PART: partition 1 on (mmcsd0, MBR) is not aligned on 4194304 bytes
mmc1: REQUEST: CMD1 arg 0x40ff8080 flags 0x61
GEOM_PART: partition 2 on (mmcsd0, MBR) is not aligned on 4194304 bytes
mmc1: Probing cards
mmc1: REQUEST: CMD2 arg 0 flags 0x67
mmc0: REQUEST: CMD17 arg 0x39a3fff flags 0x35 data 512
mmc1: New card detected (CID fe014e503158585858130de13ff025ef)
mmc1: REQUEST: CMD3 arg 0x20000 flags 0x75
mmc0: REQUEST: CMD18 arg 0x80 flags 0x35 data 8192
mmc1: REQUEST: CMD9 arg 0x20000 flags 0x67
mmc0: REQUEST: CMD18 arg 0x10 flags 0x35 data 8192
mmc1: New card detected (CSD d04f01320f5913ffffffffe78a40008f)
mmc1: REQUEST: CMD13 arg 0x20000 flags 0x15
mmc0: REQUEST: CMD18 arg 0 flags 0x35 data 8192
mmc1: REQUEST: CMD7 arg 0x20000 flags 0x1d
mmc0: REQUEST: CMD18 arg 0x200 flags 0x35 data 8192
mmc1: REQUEST: CMD8 arg 0 flags 0x35 data 512
mmc0: REQUEST: CMD18 arg 0x80 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x10 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0 flags 0x35 data 8192
mmc1: REQUEST: CMD19 arg 0 flags 0x35 data 4
mmc0: aw_mmc1: error rint: 0x0000801C
AW_MMC_INT_DATA_END_BIT_ERR
REQUEST: CMD18 arg 0x200 flags 0x35 data 8192
mmc1: CMD19 RESULT: 4
mmc1: REQUEST: CMD14 arg 0 flags 0x35 data 4
mmc0: REQUEST: CMD17 arg 0x40 flags 0x35 data 512
mmc1: REQUEST: CMD6 arg 0x3af0101 flags 0x1d
mmc0: REQUEST: CMD17 arg 0 flags 0x35 data 512
mmc1: REQUEST: CMD13 arg 0x20000 flags 0x15
mmc0: REQUEST: CMD17 arg 0x2 flags 0x35 data 512
mmc1: Card at relative address 0x0002 added:
mmc1: card: MMCHC P1XXXX 1.3 SN 0DE13FF0 MFG 02/2018 by 254 0x004e
mmc1: quirks: 0
mmc1: bus: 4bit, 200MHz (HS200 timing)
mmc1: memory: 7553024 blocks, erase sector 8192 blocks
mmc1: REQUEST: CMD7 arg 0 flags 0
mmc0: REQUEST: CMD17 arg 0x10 flags 0x35 data 512
mmc1: REQUEST: CMD2 arg 0 flags 0x67
mmc0: REQUEST: CMD17 arg 0x80 flags 0x35aw_mmc1: error rint: 0x00000104
AW_MMC_INT_RESP_TIMEOUT
data 512
mmc1: CMD2 RESULT: 1
mmc1: REQUEST: CMD2 arg 0 flags 0x67
mmc0: REQUEST: CMD17 arg 0 flags 0x35aw_mmc1: error rint: 0x00000104
AW_MMC_INT_RESP_TIMEOUT
uhub2: 1 port with 1 removable, self powered
data 512
mmc1: CMD2 RESULT: 1
mmc1: REQUEST: CMD2 arg 0 flags 0x67
aw_mmc1: error rint: 0x00000100
AW_MMC_INT_RESP_TIMEOUT
mmc1: CMD2 RESULT: 1
mmc1: REQUEST: CMD7 arg 0x20000 flags 0x1d
mmc0: REQUEST: CMD17 arg 0x820 flags 0x35 data 512
mmc1: REQUEST: CMD7 arg 0 flags 0
mmc1: setting transfer rate to 52.000MHz (dual data rate timing)
mmc1: REQUEST: CMD7 arg 0x20000 flags 0x1d
mmc0: REQUEST: CMD17 arg 0x197c6 flags 0x35 data 512
mmc1: REQUEST: CMD6 arg 0x3b90101 flags 0x1d
mmc0: REQUEST: CMD18 arg 0x89f flags 0x35 data 8192
mmc1: REQUEST: CMD13 arg 0x20000 flags 0x15
mmc0: REQUEST: CMD18 arg 0x82f flags 0x35 data 8192
mmc1: REQUEST: CMD6 arg 0x3b70501 flags 0x1d
mmc0: REQUEST: CMD18 arg 0x81f flags 0x35 data 8192
mmc1: REQUEST: CMD13 arg 0x20000 flags 0x15
mmc0: REQUEST: CMD18 arg 0xa1f flags 0x35 data 8192
aw_mmc1: Cannot set vqmmc to 1800000<->1800000
mmc1: Failed to set VCCQ for card at relative address 2
mmc1: REQUEST: CMD7 arg 0 flags 0
mmc0: REQUEST: CMD18 arg 0x89f flags 0x35 data 8192
mmc1: REQUEST: CMD7 arg 0x20000 flags 0x1d
mmc0: REQUEST: CMD18 arg 0x82f flags 0x35 data 8192
mmc1: REQUEST: CMD8 arg 0 flags 0x35 data 512
mmc0: REQUEST: CMD18 arg 0x81f flags 0x35 data 8192
mmcsd1: taking advantage of TRIM
mmcsd1: cache size 0KB
mmcsd1: 4GB <MMCHC P1XXXX 1.3 SN 0DE13FF0 MFG 02/2018 by 254 0x004e> at mmc1 0.4MHz/4bit/32768-block
mmcsd1boot0: 17MB partion 1 at mmcsd1
mmcsd1boot1: 17MB partion 2 at mmcsd1
mmcsd1rpmb: 131kB partion 3 at mmcsd1
Release APs
CPU(1) applied BP hardening: not necessary
mmc0: REQUEST: CMD18 arg 0xa1f flags 0x35Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
data 8192
WARNING: WITNESS option enabled, expect reduced performance.
mmc0: regulator: shutting down vcc3v0
REQUEST: CMD17 arg 0x85f flags 0x35regulator: shutting down vcc3v3
data 512
regulator: shutting down vcc5v0
mmc0: regulator: shutting down vddio-csi0
REQUEST: CMD17 arg 0x81f flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x821 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x82f flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x89f flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x81f flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197c8 flags 0x35 data 512
mmc0: regulator: shutting down ahci-5v
REQUEST: CMD18 arg 0x197c7 flags 0x35regulator: shutting down usb0-vbus
data 8192
regulator: shutting down usb1-vbus
GEOM_PART: partition 1 on (mmcsd0s2, BSD) is not aligned on 4194304 bytes
regulator: shutting down usb2-vbus
mmc0: REQUEST: CMD17 arg 0x39a3fff flags 0x35 data 512
mmc0: REQUEST: CMD18 arg 0x19847 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x197d7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x197c7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x199c7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x19847 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x197d7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x197c7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x199c7 flags 0x35 data 8192
mmc0: REQUEST: CMD17 arg 0x19807 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197c7 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197c9 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197d7 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x19847 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197c7 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x1 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x1 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x39a3fff flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0 flags 0x35 data 512
GEOM_PART: partition 1 on (diskid/DISK-010A34D8, MBR) is not aligned on 4194304 bytes
GEOM_PART: partition 2 on (diskid/DISK-010A34D8, MBR) is not aligned on 4194304 bytes
GEOM: new disk mmcsd1
GEOM: new disk mmcsd1boot0
GEOM: new disk mmcsd1boot1
mmc0: REQUEST: CMD17 arg 0x820 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x39a3fff flags 0x35 data 512
mmc0: REQUEST: CMD18 arg 0x19880 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x23600 flags 0x35 data 4096
mmc0: REQUEST: CMD18 arg 0x19880 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x23600 flags 0x35 data 4096
mmc0: REQUEST: CMD17 arg 0x19840 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x19800 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x19802 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x19810 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x19880 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x19800 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x820 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197c6 flags 0x35 data 512
mmc0: REQUEST: CMD18 arg 0x89f flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x82f flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x81f flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0xa1f flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x89f flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x82f flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x81f flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0xa1f flags 0x35 data 8192
mmc0: REQUEST: CMD17 arg 0x85f flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x81f flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x821 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x82f flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x89f flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x81f flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197c8 flags 0x35 data 512
mmc0: REQUEST: CMD18 arg 0x197c7 flags 0x35 data 8192
GEOM_PART: partition 1 on (diskid/DISK-010A34D8s2, BSD) is not aligned on 4194304 bytes
mmc0: REQUEST: CMD17 arg 0x39a3fff flags 0x35 data 512
mmc0: REQUEST: CMD18 arg 0x19847 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x197d7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x197c7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x199c7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x19847 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x197d7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x197c7 flags 0x35 data 8192
mmc0: REQUEST: CMD18 arg 0x199c7 flags 0x35 data 8192
mmc0: REQUEST: CMD17 arg 0x19807 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197c7 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197c9 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197d7 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x19847 flags 0x35 data 512
mmc0: REQUEST: CMD17 arg 0x197c7 flags 0x35 data 512
mmc1: REQUEST: CMD17 arg 0x1 flags 0x35 data 512
mmc1: REQUEST: CMD17 arg 0 flags 0x35 data 512
aw_mmc1: error rint: 0x00002004
AW_MMC_INT_DATA_START_ERR
aw_mmc1: timeout updating clock
mmc1: CMD17 RESULT: 4
mmcsd1: Error indicated: 4 Failed
mmc1: REQUEST: CMD17 arg 0 flags 0x35 data 512
aw_mmc1: controller timeout
-------------- next part --------------
[ 2.552915] [mmc-msg] sw_mci_initMB total
[ 2.561980] [mmc-msg] MMC host used card: 0x5, boot card: 0x5, io_card 0 highmem
[ 2.573943] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 2.588140] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 2.606166] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 2.622265] [mmc-msg] sdc0 Probe: base:0xf014e000 irq:64 sg_cpu:f0150000(4fc00000) ret 0.
[ 2.632902] [mmc-msg] sdc0 power onW1651/sun7i) detected.
[ 2.642415] [mmc-msg] sdc2 set round clock 400000, src 24000000
[ 2.656592] [mmc-msg] sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 2.674011] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 2.691565] [mmc-msg] sdc2 Probe: base:0xf0152000 irq:66 sg_cpu:f0154000(4fc01000) ret 0.
[ 2.704635] [mmc-msg] sdc0 set round clock 400000, src 24000000
[ 2.797708] [mmc_pm]: No sdio card, please check your config !!
[ 2.801413] Registering the dns_resolver key type
[ 2.809451] [mmc-err] smc 0 err, cmd 52, RTO
[ 2.815815] VFP support v0.3:
[ 2.822008] [mmc-err] smc 0 err, cmd 52, RTO
[ 2.834919] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 2.878265] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.017995] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.059575] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
3.250515] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.268265] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.282907] [mmc-msg] sdc0 set round clock 42857143, src 600000000
[ 3.348160] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 3.362089] mmc0: new high speed SDHC card at address 0007
[ 3.371509] mmcblk0: mmc0:0007 SD32G 28.8 GiB
[ 3.379864] mmcblk0: p1 p2
ng LEGACY(SDR12) dt B
[ 3.402918] [mmc-msg] sdc2 power on
timing LEGACY(SDR12) dt B
[ 3.442312] [mmc-msg] sdc2 set round clock 400000, src 24000000
optional features (240)
optional features (240)
pts: (null)
[ 3.535943] [mmc-err] smc 2 err, cmd 52, RTO
[ 3.545337] VFS: Mounted root (ext4 filesystem) on device 179:2.
[ 3.554666] [mmc-err] smc 2 err, cmd 52, RTO
timing LEGACY(SDR12) dt B
[ 3.569306] devtmpfs: mounted
[ 3.584235] Freeing init memory: 260K
timing LEGACY(SDR12) dt B
[ 3.614606] [mmc-err] smc 2 err, cmd 8, RTO
[ 3.623595] [mmc-err] smc 2 err, cmd 5, RTO
[ 3.631956] [mmc-err] smc 2 err, cmd 5, RTO
[ 3.640432] [mmc-err] smc 2 err, cmd 5, RTO
[ 3.649210] [mmc-err] smc 2 err, cmd 5, RTO
[ 3.657819] [mmc-err] smc 2 err, cmd 55, RTO
[ 3.666438] [mmc-err] smc 2 err, cmd 55, RTO
[ 3.675015] [mmc-err] smc 2 err, cmd 55, RTO
[ 3.683583] [mmc-err] smc 2 err, cmd 55, RTO
timing LEGACY(SDR12) dt B
timing LEGACY(SDR12) dt B
timing LEGACY(SDR12) dt B
timing LEGACY(SDR12) dt B
timing LEGACY(SDR12) dt B
timing LEGACY(SDR12) dt B
[ 3.862458] [mmc-msg] sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
[ 3.880597] [mmc-msg] sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing MMC-HS(SDR20) dt B
[ 3.895403] [mmc-msg] sdc2 set round clock 42857143, src 600000000
[ 3.965416] [mmc-msg] sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 8 timing MMC-HS(SDR20) dt B
[ 3.980235] [mmc-err] smc 2 err, cmd 8, EBE
[ 3.987729] [mmc-err] In data read operation
[ 3.997067] [mmc-msg] found data error, need to send stop command
[ 4.007083] [mmc-err] sdc 2 send stop command failed
[ 4.022126] [mmc-msg] sdc2 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing MMC-HS(SDR20) dt B
[ 4.037718] mmc1: new high speed MMC card at address 0001
[ 4.047711] mmcblk1: mmc1:0001 P1XXXX 3.60 GiB
[ 4.058195] mmcblk1boot0: mmc1:0001 P1XXXX partition 1 16.0 MiB
[ 4.069537] mmcblk1boot1: mmc1:0001 P1XXXX partition 2 16.0 MiB
[ 4.084340] mmcblk1: p1 p4
[ 4.084345] p4: <openbsd: p5 p6 p7 p8bad subpartition - ignored
[ 4.084351] >
[ 4.105856] Dev Sunxi softw311 mmcblk1boot1 magic does not match for MBR 1:
[ 4.120563] Dev Sunxi softw311 mmcblk1boot1 magic does not match for MBR 2: :
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk1boot0 179:16 0 16M 1 disk
mmcblk1boot1 179:24 0 16M 1 disk
mmcblk0 179:0 0 28.8G 0 disk
|-mmcblk0p1 179:1 0 16M 0 part /boot
`-mmcblk0p2 179:2 0 1.9G 0 part /
mmcblk1 179:8 0 3.6G 0 disk
|-mmcblk1p1 179:9 0 16M 0 part
|-mmcblk1p4 179:12 0 3.6G 0 part
|-mmcblk1p5 179:13 0 881.8M 0 part
|-mmcblk1p6 179:14 0 243.5M 0 part
|-mmcblk1p7 179:15 0 2.1G 0 part
`-mmcblk1p8 259:0 0 370.5M 0 part
More information about the freebsd-arm
mailing list