MACCHIATObin

[Marcin Wojtas]

Hi Luiz,

Great, didn't know you played with the xenon. Looking forward to the upstream :)

Indeed, I forgot the ICU/GICP IRQ controllers, they must be added to
the tree. However, if we boot with a bit downgraded DT and the older
ATF, that ensures static ICU - GICv2 mapping, it will work. I will
soon add ICU configuration to UEFI (we need this for ACPI as well), so
there may be only the case of providing suited DT.

Best regards,
Marcin

2018-05-11 13:46 GMT+02:00 Luiz Otavio O Souza <lists.br at gmail.com>:
> On 11 May 2018 at 04:55, Marcin Wojtas wrote:
>> HI Dustin,
>>
>> Short status of the support - last year we enabled most of the
>> platform functionalities (core support, USB, AHCI, RTC). Three big
>> items remained left:
>> - PCIE root complex (this should work soon with the work done for
>> another SoC, not merged yet)
>> - Network PPv2
>> - Xenon SD/MMC controller
>
> Marcin,
>
> The Xenon driver that I wrote for the espresso.bin works on
> macchiato.bin, but we are missing the drivers for interrupt controller
> on the cp110 modules.
>
> The devices directly attached to GIC works fine.
>
> Luiz
>
>
>
>>
>> Best regards,
>> Marcin
>>
>> 2018-05-11 8:59 GMT+02:00 Dustin Marquess <dmarquess at gmail.com>:
>>> Is anybody working on Marvell ARMADA 8040 support for the MACCHIATObin SBC?
>>>
>>> I'm looking at getting one to run as a firewall, but I really don't want to
>>> run Linux on it if at all possible.  This seems like a killer use case for
>>> FreeBSD/arm64!
>>>
>>> Thanks!
>>> -Dustin