FreeBSD bootup freeze when running it on BeagleBone Black

[Udit agarwal]

On Sun, May 6, 2018 at 8:09 PM, Emmanuel Vadot <manu at bidouilliste.com>
wrote:

> On Sat, 24 Mar 2018 23:52:14 -0700
> John-Mark Gurney <jmg at funkthat.com> wrote:
>
> > Udit agarwal wrote this message on Sun, Mar 18, 2018 at 16:19 +0530:
> > > I am trying to build FreeBSD 12.0 on BeagleBone Black. However, during
> > > kernel initialization it's getting freeze. I took the image from here
> > > <http://ftp.freebsd.org/pub/FreeBSD/snapshots/arm/armv7/
> ISO-IMAGES/12.0/>
> > > .Here's the error log:
> >
> > Just a heads up, I'm getting the same thing, I also ran all three latest
> > snapshots and seeing similar behavior:
> > FreeBSD 12.0-CURRENT #0 r330034: Mon Feb 26 23:44:48 UTC 2018
> >     root at releng3.nyi.freebsd.org:/usr/obj/usr/src/arm.armv7/sys/GENERIC
> arm
> > [...]
> > cpswss0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff
> irq 38,39,40,41 on simplebus0
> > cpswss0: CPSW SS Version 1.12 (0)
> > cpswss0: Initial queue size TX=128 RX=384
> > cpswss0: Unable to fill RX queue
> > cpsw0: <Ethernet Switch Port> on cpswss0
> > miibus0: <MII bus> on cpsw0
> > smscphy0: <SMC LAN8710A 10/100 interface> PHY 0 on miibus0
> > smscphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> > cpsw0: Ethernet address: xx:xx:xx:xx:xx:xx
> > cryptosoft0: <software crypto>
> > usbus0: 480Mbps High Speed USB v2.0
> > usbus1: 480Mbps High Speed USB v2.0
> > <hangs>
> >
> > and:
> > FreeBSD 12.0-CURRENT #0 r330606: Wed Mar  7 19:26:58 UTC 2018
> >     root at releng3.nyi.freebsd.org:/usr/obj/usr/src/arm.armv7/sys/GENERIC
> arm
> > [...]
> > cpswss0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff
> irq 38,39,40,41 on simplebus0
> > cpswss0: CPSW SS Version 1.12 (0)
> > cpswss0: Initial queue size TX=128 RX=384
> > cpswss0: Unable to fill RX queue
> > cpsw0: <Ethernet Switch Port> on cpswss0
> > <hangs>
> >
> > and:
> > FreeBSD 12.0-CURRENT #0 r331001: Thu Mar 15 18:47:28 UTC 2018
> >     root at releng3.nyi.freebsd.org:/usr/obj/usr/src/arm.armv7/sys/GENERIC
> arm
> > [...]
> > cpswss0: <3-port Switch Ethernet Subsystem> mem 0x4a100000-0x4a1007ff,0x4a101200-0x4a1012ff
> irq 38,39,40,41 on simplebus0
> > cpswss0: CPSW SS Version 1.12 (0)
> > cpswss0: Initial queue size TX=128 RX=384
> > cpswss0: Unable to fill RX queue
> > cpsw0: <Ethernet Switch Port> on cpswss0
> > <hangs>
> >
> > So, it looks like Feb 26th got a bit farther, but it still hung.
> >
> > --
> >   John-Mark Gurney                            Voice: +1 415 225 5579
> >
> >      "All that I will do, has been done, All that I have, has not."
> > _______________________________________________
> > freebsd-arm at freebsd.org mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> > To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>
>  Don't know what changed but it's magically fixed in HEAD (along with a
> another fix due to latest dts import).
>
> Yes, with the latest image it's booting fine. However, with MMCCAM
kernconfig file problem is still same as before, the one reported in this
<https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=227648> bug.

> --
> Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>
>