Pine64+ - FreeBSD 12.0-CURRENT r327979 GENERIC-NODEBUG boot freeze

[Henri Hennebert]

Hello

I try FreeBSD 12.0-CURRENT r327979 GENERIC-NODEBUG on a Pine64+ and the
boot freeze:

 >> FreeBSD EFI boot block
    Loader path: /boot/loader.efi

    Initializing modules: ZFS UFS
    Load Path: \efi\boot\bootaa64.efi
    Load Device: mmc0
    Probing 3 block devices.....* done
     ZFS found no pools
     UFS found 1 partition
Consoles: EFI console
Command line arguments: loader.efi
Image base: 0xb6db4008
EFI version: 2.05
EFI Firmware: Das U-boot (rev 0.00)

FreeBSD/arm64 EFI loader, Revision 1.1
(Wed Jan 17 14:51:27 CET 2018 root at nakiska.restart.bel)
EFI boot environment
Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x82d6ed data=0xb09d0+0x3a09cc 
syms=[0x8+0x10dfa0+0x8+0x100945]
/boot/entropy size=0x1000

Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 4 seconds... Booting 
[/boot/kernel/kernel] in 3 seconds... Booting [/boot/kernel/kernel] in 2 
seconds... Booting [/boot/kernel/kernel] in 1 second... Booting 
[/boot/kernel/kernel]...
Using DTB provided by EFI at 0x48000000.
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #0 r327979M: Wed Jan 17 19:28:35 CET 2018
 
root at nakiska.restart.bel:/usr/obj/usr/src/arm64.aarch64/sys/GENERIC-NODEBUG 
arm64
FreeBSD clang version 6.0.0 (branches/release_60 321788) (based on LLVM 
6.0.0)
VT: init without driver.
module_register: cannot register gic/gicv2m from kernel; already loaded 
from kernel
Module gic/gicv2m failed to register: 17
Starting CPU 1 (1)
Starting CPU 2 (2)
Starting CPU 3 (3)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: unblocking device.
module_register_init: MOD_LOAD (efirt, 0xffff000000102ee4, 0) error 12
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
clk_fixed0: <Fixed clock> on ofwbus0
clk_fixed1: <Fixed clock> on ofwbus0
clk_fixed2: <Fixed clock> on ofwbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
aw_ccung0: <Allwinner Clock Control Unit NG> mem 0x1c20000-0x1c203ff on 
simplebus0
iichb0: <Allwinner Integrated I2C Bus Controller> mem 
0x1c2b000-0x1c2b3ff irq 21 on simplebus0
iicbus0: <OFW I2C bus> on iichb0
aw_ccung1: <Allwinner Clock Control Unit NG> mem 0x1f01400-0x1f014ff on 
simplebus0
regfix0: <Fixed Regulator> on ofwbus0
psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0
awusbphy0: <Allwinner USB PHY> mem 
0x1c19400-0x1c19413,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803 on simplebus0
gic0: <ARM Generic Interrupt Controller> mem 
0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff 
irq 23 on simplebus0
gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 224
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 
12,13,14 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 26 
on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
generic_timer0: <ARMv8 Generic Timer> irq 0,1,2,3 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
rtc0: <Allwinner RTC> mem 0x1f00000-0x1f00053 irq 24,25 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 
0x1c0f000-0x1c0ffff irq 4 on simplebus0
mmc0: <MMC/SD bus> on aw_mmc0
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c1b000-0x1c1b0ff 
irq 10 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ohci0: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 11 on 
simplebus0
usbus1 on ohci0
gpioc0: <GPIO controller> on gpio0
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 15 on simplebus0
uart0: console (115384,n,8,1)
iic0: <I2C generic I/O> on iicbus0
gpioc1: <GPIO controller> on gpio1
awg0: <Allwinner Gigabit Ethernet> mem 
0x1c30000-0x1c31fff,0x1c00030-0x1c00033 irq 27 on simplebus0
miibus0: <MII bus> on awg0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 0 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 
1000baseT-FDX-flow-master, auto, auto-flow
rgephy1: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy1:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 
100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 
1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 
1000baseT-FDX-flow-master, auto, auto-flow
awg0: Ethernet address: 02:ba:cf:46:d5:39
cryptosoft0: <software crypto>
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 12Mbps Full Speed USB v1.0
--- freeze ---

Henri