MACCHIATObin
Jim Thompson
jim at netgate.com
Fri Aug 17 23:10:57 UTC 2018
On Aug 17, 2018, at 5:42 PM, Mark Millard via freebsd-arm <freebsd-arm at freebsd.org> wrote:
> Marcin Wojtas mw at semihalf.com wrote on
> Fri May 11 07:55:40 UTC 2018 :
>
>> Short status of the support - last year we enabled most of the
>> platform functionalities (core support, USB, AHCI, RTC). Three big
>> items remained left:
>> - PCIE root complex (this should work soon with the work done for
>> another SoC, not merged yet)
>> - Network PPv2
>> - Xenon SD/MMC controller
>
>
> I noticed a check in that deals with that "Xenon"
> SD/MMC controller:
>
> Author: loos
> Date: Tue Aug 14 16:33:30 2018
> New Revision: 337772
> URL:
> https://svnweb.freebsd.org/changeset/base/337772
>
>
> Log:
> Add support to the Marvell Xenon SDHCI controller.
>
> Tested on Espresso.bin (37x0) and Macchiato.bin (8k) with SD cards and
> eMMCs.
>
> Obtained from: pfSense
> Sponsored by: Rubicon Communications, LLC (Netgate)
>
> Added:
> head/sys/dev/sdhci/sdhci_xenon.c (contents, props changed)
> head/sys/dev/sdhci/sdhci_xenon.h (contents, props changed)
> Modified:
> head/sys/arm64/conf/GENERIC
> head/sys/conf/files.arm64
> . . .
>
> But I've not noticed check-ins for the other of the "big
> items" going by. (Though they may have.)
>
> Care to comment-on/update-the actual status for the
> Macchiato.bin(s)?
tl;dr: It’s not ‘there’ yet.
Specifics:
- loos@ has done a lot of work to get the espresso.bin working, and some of this carries over to the 8k/7k.
- We have another internal developer working on an EIP-97 driver for crypto offload. This should be a foundation for the EIP-197 in the 8K.
- I know manu at is working on pin controllers and clocks specific to Machiatto.bin (80x0/70x0).
- Getting the NICs, PCIe, etc working still remains to be done.
Jim
More information about the freebsd-arm
mailing list