FreeBSD 12 on nano pi neo/orange pi zero
Peter Ankerstål
peter at pean.org
Thu Jun 29 21:16:53 UTC 2017
Hi!
I have used crochet and built an image for NanoPi NEO. I actually works to boot in single user mode but the something seems to break.
The image is build on: FreeBSD-armv6-12.0-ALLWINNER-316170
I have no idea if the problem is my image or the particular revision of FreeBSD.
I could do stuff like top, ps, and df:
# top
last pid: 27; load averages: 1.24, 0.35, 0.13 up 0+00:00:27 00:00:49
2 processes: 1 running, 1 sleeping
CPU: 0.0% user, 0.0% nice, 0.1% system, 0.0% interrupt, 99.9% idle
Mem: 1720K Active, 108K Inact, 29M Wired, 4332K Buf, 461M Free
Swap:
PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND
27 root 1 20 0 7624K 2792K CPU0 0 0:00 0.37% top
22 root 1 20 0 6712K 2552K wait 3 0:00 0.00% sh
# cat /etc/fstab /dev/mmcsd0s1 /boot/msdos msdosfs rw,noatime 0 0
/dev/mmcsd0s2a / ufs rw,noatime 1 1
md /tmp mfs rw,noatime,-s50m 0 0
md /var/log mfs rw,noatime,-s15m 0 0
md /var/tmp mfs rw,noatime,-s12m 0 0
# df
Filesystem 512-blocks Used Avail Capacity Mounted on
/dev/mmcsd0s2a 7307704 1955960 4767128 29% /
devfs 2 2 0 100% /dev
I have this trace:
# exit
Growing root partition to fill device
mmcsd0s2 resized
mmcsd0s2a resized
eval: growfs: Device not configured
/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
eval: uuidgen: Device not configured
eval: /sbin/md5: Device not configured
Setting hostuuid: .
Setting hostid: 0x.
sysctl: invalid unsigned long '0x'
No suitable dump device was found.
eval: /sbin/swapon: Device not configured
Fast boot: skipping disk checks.
panic: access but not attached
cpuid = 0
time = 1262304250
KDB: stack backtrace:
$a.4() at $a.4
pc = 0xc06e8f14 lr = 0xc02598dc (db_trace_self_wrapper+0x30)
sp = 0xdea028d8 fp = 0xdea029f0
db_trace_self_wrapper() at db_trace_self_wrapper+0x30
pc = 0xc02598dc lr = 0xc040e32c (vpanic+0x148)
sp = 0xdea029f8 fp = 0xdea02a18
r4 = 0x00000100 r5 = 0x00000001
r6 = 0xc038fdec r7 = 0xc09ab2c8
vpanic() at vpanic+0x148
pc = 0xc040e32c lr = 0xc040e1d0 ($d.10)
sp = 0xdea02a20 fp = 0xdea02a34
r4 = 0xc038fdec r5 = 0xdea02a3c
r6 = 0x00000001 r7 = 0x00000000
r8 = 0x00000000 r9 = 0xc0a24fc0
r10 = 0xc2b79cd0
$d.10() at $d.10
pc = 0xc040e1d0 lr = 0xc038fc30 (g_access+0x2d8)
sp = 0xdea02a48 fp = 0xdea02a90
r4 = 0xc3272200 r5 = 0x00000001
r6 = 0x00000001 r10 = 0xc2b79cd0
g_access() at g_access+0x2d8
pc = 0xc038fc30 lr = 0xc0692fe8 ($a.15+0x3d0)
sp = 0xdea02a98 fp = 0xdea02bb8
r4 = 0xc07a479b r5 = 0xc32bc360
r6 = 0xc3320000 r7 = 0xc331f000
r8 = 0xc323fae0 r9 = 0xc0a24fc0
r10 = 0xc2b79cd0
$a.15() at $a.15+0x3d0
pc = 0xc0692fe8 lr = 0xc04d0dc4 ($a.11+0xa64)
sp = 0xdea02bc0 fp = 0xdea02d60
r4 = 0xc0880980 r5 = 0x00000000
r6 = 0xffffffff r7 = 0x00000001
r8 = 0xc2b79c44 r9 = 0xc2b79c40
r10 = 0x10005011
$a.11() at $a.11+0xa64
pc = 0xc04d0dc4 lr = 0xc04cf92c (sys_nmount+0x64)
sp = 0xdea02d68 fp = 0xdea02d80
r4 = 0xc323fae0 r5 = 0x00000000
r6 = 0x00000000 r7 = 0x60000013
r8 = 0x00000000 r9 = 0x00000000
r10 = 0xc323fae0
sys_nmount() at sys_nmount+0x64
pc = 0xc04cf92c lr = 0xc070b120 ($a.6+0x210)
sp = 0xdea02d88 fp = 0xdea02e40
r4 = 0xdea02da0 r5 = 0xc3411ac8
r6 = 0xc0a258e8 r10 = 0xc323fae0
$a.6() at $a.6+0x210
pc = 0xc070b120 lr = 0xc06ebbc8 (swi_exit)
sp = 0xdea02e48 fp = 0xbfbfe3f0
r4 = 0x20623000 r5 = 0xbfbfe3cc
r6 = 0xbfbfe3c8 r7 = 0x0000017a
r8 = 0x20625000 r9 = 0x00000000
r10 = 0x00000009
swi_exit() at swi_exit
pc = 0xc06ebbc8 lr = 0xc06ebbc8 (swi_exit)
sp = 0xdea02e48 fp = 0xbfbfe3f0
KDB: enter: panic
[ thread pid 211 tid 100076 ]
Stopped at $d.8: ldrb r15, [r15, r15, ror r15]!
db>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4193 bytes
Desc: not available
URL: <http://lists.freebsd.org/pipermail/freebsd-arm/attachments/20170629/99d024fa/attachment.bin>
More information about the freebsd-arm
mailing list