Orange Pi Zero support

[Bernd Walter]

On Tue, Jun 27, 2017 at 11:27:32PM +0200, Johnny Sorocil wrote:
> On Mon, Jun 26, 2017 at 7:11 AM, Ganbold Tsagaankhuu <ganbold at gmail.com>
> wrote:
> 
> > Just to test:
> >
> > https://people.freebsd.org/~ganbold/FreeBSD-armv6-12.0-nanopi-neo.img.xz
> >
> > The image is not so recent, but you can use (or its dtb) to test Ethernet
> > on Orange PI Zero.
> >
> 
> I didn't test the whole image, just dtb files, but they are not working on
> -CURRENT from Jul 24.

I did test one of Ganbold's nanopi-neo image in november, when the zero
came out and it worked for me on the 256MB and 512MB OrangePi zero boards.
I'm pretty sure ethernet had worked just fine.
The only thing, which was a bit unstable was USB, which however was more
likely because of the power supply setup I'd used during the test, than
anything software related.

> nanopi-neo.dtb
> nanopi_neo.dtb
> orangepi-one.dtb
>     awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c30103,
>         0x1c00030-0x1c00033 irq 28 on simplebus0
>     awg0: PHY type: mii, conf mode: reg
>     awg0: EMAC clock: 0x00168000
>     awg0: AHB frequency 200000000 Hz, MDC div: 0x3
>     awg0: soft reset timed out
>     device_attach: awg0 attach returned 60
> 
> sun8i-h3-nanopi-neo.dtb
>     panic: Can't determine TI Chip
> 
> I'll try later to copy ethernet part on the dts in the tree.
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"

-- 
B.Walter <bernd at bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.