PINE64+ Release APs, APs not started
Emmanuel Vadot
manu at bidouilliste.com
Thu Jul 27 05:52:38 UTC 2017
On Tue, 25 Jul 2017 19:22:19 +0200
Henri Hennebert <hlh at restart.be> wrote:
> Hello,
>
> With FreeBSD 12.0-CURRENT #0 r320599 I can boot normally:
>
> ...
> Release APs
> CPU 0: ARM Cortex-A53 r0p4 affinity: 0
> Instruction Set Attributes 0 = <AES+PMULL,SHA1,SHA2,CRC32>
> Instruction Set Attributes 1 = <0>
> Processor Features 0 = <AdvSIMD,Float,EL3 32,EL2 32,EL1 32,EL0 32>
> Processor Features 1 = <0>
> Memory Model Features 0 = <4k Granule,64k
> Granule,MixedEndian,S/NS Mem,16bit ASID,1TB PA>
> Memory Model Features 1 = <>
> Debug Features 0 = <2 CTX Breakpoints,4 Watchpoints,6
> Breakpoints,PMUv3,Debug v8>
> Debug Features 1 = <0>
> Auxiliary Features 0 = <0>
> Auxiliary Features 1 = <0>
> CPU 1: ARM Cortex-A53 r0p4 affinity: 1
> CPU 2: ARM Cortex-A53 r0p4 affinity: 2
> CPU 3: ARM Cortex-A53 r0p4 affinity: 3
> ...
>
> With r320869, I get
>
> Release APs
> APs not started
> x0: ffff000000977d80
> x1: fffffd000299ba80
> x2: 3
>
> I succeed one time to boot with r321003 but after that I try multiple
> times and get the same error: APs not started
>
> I try r321371 to no avail.
>
> Any idea ?
>
> Henri
Hello Henri,
I'm in the process of updating the u-boot port for pine64 which adds
new and better PSCI support. I should be done by the end of the week.
In the meantime you can use the u-boot I built from here :
fetch https://people.freebsd.org/~manu/uboot/u-boot-pine64.bin
dd if=u-boot-pine64.bin of=/dev/da0 bs=1k seek=8 conv=sync
Cheers,
--
Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>
More information about the freebsd-arm
mailing list