HummingBoard-i2 does not boot from install image

[Ian Lepore]

On Wed, 2017-07-05 at 12:01 +0000, Yoshiro MIHIRA wrote:
> I have HummingBoard-i2 and I could not boot 12.0-CURRENT boot image.
> Please let me know to boot 12.0-CURRENT with HummingBoard.
> 
> I tested
> FreeBSD-12.0-CURRENT-arm-armv6-CUBOX-HUMMINGBOARD-20170619-
> r320095.img
> 
> And it does not boot up with below message[NG].
> 
> U-Boot SPL 2017.01-rc3 (Jun 13 2017 - 02:16:03)
> SPL: Unsupported Boot Device!
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
> 
> I have a old image
> as FreeBSD-11.0-STABLE-arm-armv6-CUBOX-HUMMINGBOARD-20161221-
> r310359.img
> it can boot[OK].
> 
> Consoles: U-Boot console
> Compatible U-Boot API signature found @0x4f7708a8
> 
> FreeBSD/armv6 U-Boot loader, Revision 1.2
> (root at releng2.nyi.freebsd.org, Wed Dec 21 18:14:05 UTC 2016)
> 
> DRAM: 1024MB
> Number of U-Boot devices: 2
> U-Boot env: loaderdev='mmc 0'
> Found U-Boot device: disk
>   Checking unit=0 slice=<auto> partition=<auto>... good.
> Booting from disk0s2a:
> /boot/kernel/kernel data=0x6ec964+0x14b69c
> syms=[0x4+0x7cef0+0x4+0x90376]
> 
> Hit [Enter] to boot immediately, or any other key for command prompt.
> Booting [/boot/kernel/kernel] in 4 seconds...
> 
> Thanks
> Yoshiro MIHIRA

I just downloaded that same 20170619 image and it boots fine on my
Cubox, but its build date/time are different:

U-Boot SPL 2017.01-rc3 (Jun 19 2017 - 20:54:45)

I don't have a hummingboard to test, but u-boot has always been able to
use the same image to boot a cubox and a hummingboard.

-- Ian