usb trouble cubox bsd 11 - FreeBSD 11.0-STABLE #0 r310359: Wed Dec 21 18:19:11 UTC 2016

Fri Feb 10 16:59:42 UTC 2017

Hello, freebsd team:

Please see listing below
I have two problems:

> usb seems not work : nothing in dmesg , when I plug something in usb
>/sbin/shutdown: Permission denied.  :  I am  freebsd/freebsd

Don't you have any idea ? It works on linux , generally, sorry
Whith a debian  on the same plateform, no problems

Regards

Kind Regards

freebsd at imx6:~ % dmesg
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-STABLE #0 r310359: Wed Dec 21 18:19:11 UTC 2016
    root at releng2.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/IMX6 arm
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT: init without driver.
CPU: Cortex A9-r2 rev 10 (Cortex-A core)
 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
 WB enabled LABT branch prediction disabled
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 4-way instruction cache Read-Alloc
real memory  = 2147483648 (2048 MB)
avail memory = 2090909696 (1994 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 46,47,48 on simplebus1
simplebus3: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus3
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 44,45 on simplebus1
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 9 on simplebus0
l2cache0: cannot allocate IRQ, not using interrupt
l2cache0: Part number: 0x3, release: 0x7
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on simplebus1
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b irqs 160
imx_gpt0: <Freescale i.MX GPT timer> mem 0x2098000-0x209bfff irq 26 on simplebus1
Event timer "iMXGPT" frequency 66000000 Hz quality 800
Timecounter "iMXGPT" frequency 66000000 Hz quality 1000
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 8 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
hdmi0: <Freescale i.MX6 HDMI core> mem 0x120000-0x128fff irq 5 on simplebus0
hdmi0: HDMI controller 13:0a:a0:c1
uart0: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 66 on simplebus2
uart0: console (115200,n,8,1)
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 27,28 on simplebus1
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 29,30 on simplebus1
gpiobus1: <GPIO bus> on gpio1
gpioc1: <GPIO controller> on gpio1
gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 31,32 on simplebus1
gpiobus2: <GPIO bus> on gpio2
gpioc2: <GPIO controller> on gpio2
gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 33,34 on simplebus1
gpiobus3: <GPIO bus> on gpio3
gpioc3: <GPIO controller> on gpio3
gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 35,36 on simplebus1
gpiobus4: <GPIO bus> on gpio4
gpioc4: <GPIO controller> on gpio4
gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 37,38 on simplebus1
gpiobus5: <GPIO bus> on gpio5
gpioc5: <GPIO controller> on gpio5
gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 39,40 on simplebus1
gpiobus6: <GPIO bus> on gpio6
gpioc6: <GPIO controller> on gpio6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 42 on simplebus1
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 50 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 51 on simplebus1
src0: <Freescale i.MX6 System Reset Controller> mem 0x20d8000-0x20dbfff irq 54,55 on simplebus1
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 73 on simplebus3
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 74 on simplebus3
usbus1: EHCI version 1.0
usbus1 on ehci1
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 77,78 on simplebus3
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 4 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ffec0: Ethernet address: d0:63:b4:00:99:69
sdhci_imx0: <Freescale uSDHC controller> mem 0x2190000-0x2193fff irq 82 on simplebus3
mmc0: <MMC/SD bus> on sdhci_imx0
sdhci_imx1: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 83 on simplebus3
mmc1: <MMC/SD bus> on sdhci_imx1
iichb0: <Freescale i.MX I2C> mem 0x21a4000-0x21a7fff irq 87 on simplebus3
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <Freescale i.MX I2C> mem 0x21a8000-0x21abfff irq 88 on simplebus3
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0xd0
uart1: <Freescale i.MX UART> mem 0x21f0000-0x21f3fff irq 95 on simplebus3
fb0: <Freescale IPU> mem 0x2400000-0x27fffff irq 12,13 on simplebus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cryptosoft0: <software crypto>
Timecounters tick every 2.000 msec
hdmi0: reading EDID from iicbus0, addr 50
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
fbd0 on fb0
VT: initialize with new VT driver "fb".
mmc0: No compatible cards found on bus
mmcsd0: 4GB <SDHC SS04G 8.0 SN 532C48EE MFG 12/2015 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
Release APs
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
WARNING: /releng/11-armv6-CUBOX-HUMMINGBOARD-snap/usr/obj/usr/src/release/ufs was not properly dismounted
warning: no time-of-day clock registered, system time will not be set accurately
random: unblocking device.
ffec0: link state changed to DOWN
ffec0: link state changed to UP
freebsd at imx6:~ % dmesg
Copyright (c) 1992-2016 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-STABLE #0 r310359: Wed Dec 21 18:19:11 UTC 2016
    root at releng2.nyi.freebsd.org:/usr/obj/arm.armv6/usr/src/sys/IMX6 arm
FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
VT: init without driver.
CPU: Cortex A9-r2 rev 10 (Cortex-A core)
 Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
 WB enabled LABT branch prediction disabled
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc
 32KB/32B 4-way instruction cache Read-Alloc
real memory  = 2147483648 (2048 MB)
avail memory = 2090909696 (1994 MB)
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
random: entropy device external interface
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
simplebus0: <Flattened device tree simple bus> on ofwbus0
simplebus1: <Flattened device tree simple bus> mem 0x2000000-0x20fffff on simplebus0
simplebus2: <Flattened device tree simple bus> mem 0x2000000-0x203ffff on simplebus1
imx6_anatop0: <Freescale i.MX6 Analog PLLs and Power> mem 0x20c8000-0x20c8fff irq 46,47,48 on simplebus1
simplebus3: <Flattened device tree simple bus> mem 0x2100000-0x21fffff on simplebus0
ocotp0: <Freescale On-Chip One-Time-Programmable Memory> mem 0x21bc000-0x21bffff on simplebus3
ccm0: <Freescale i.MX6 Clock Control Module> mem 0x20c4000-0x20c7fff irq 44,45 on simplebus1
l2cache0: <PL310 L2 cache controller> mem 0xa02000-0xa02fff irq 9 on simplebus0
l2cache0: cannot allocate IRQ, not using interrupt
l2cache0: Part number: 0x3, release: 0x7
l2cache0: L2 Cache enabled: 1024KB/32B 16 ways
imx_iomux0: <Freescale i.MX pin configuration> mem 0x20e0000-0x20e3fff on simplebus1
gic0: <ARM Generic Interrupt Controller> mem 0xa01000-0xa01fff,0xa00100-0xa001ff on simplebus0
gic0: pn 0x390, arch 0x1, rev 0x2, implementer 0x43b irqs 160
imx_gpt0: <Freescale i.MX GPT timer> mem 0x2098000-0x209bfff irq 26 on simplebus1
Event timer "iMXGPT" frequency 66000000 Hz quality 800
Timecounter "iMXGPT" frequency 66000000 Hz quality 1000
mp_tmr0: <ARM MPCore Timers> mem 0xa00600-0xa0061f irq 8 on simplebus0
Event timer "MPCore" frequency 492000000 Hz quality 1000
hdmi0: <Freescale i.MX6 HDMI core> mem 0x120000-0x128fff irq 5 on simplebus0
hdmi0: HDMI controller 13:0a:a0:c1
uart0: <Freescale i.MX UART> mem 0x2020000-0x2023fff irq 66 on simplebus2
uart0: console (115200,n,8,1)
gpio0: <Freescale i.MX GPIO Controller> mem 0x209c000-0x209ffff irq 27,28 on simplebus1
gpiobus0: <GPIO bus> on gpio0
gpioc0: <GPIO controller> on gpio0
gpio1: <Freescale i.MX GPIO Controller> mem 0x20a0000-0x20a3fff irq 29,30 on simplebus1
gpiobus1: <GPIO bus> on gpio1
gpioc1: <GPIO controller> on gpio1
gpio2: <Freescale i.MX GPIO Controller> mem 0x20a4000-0x20a7fff irq 31,32 on simplebus1
gpiobus2: <GPIO bus> on gpio2
gpioc2: <GPIO controller> on gpio2
gpio3: <Freescale i.MX GPIO Controller> mem 0x20a8000-0x20abfff irq 33,34 on simplebus1
gpiobus3: <GPIO bus> on gpio3
gpioc3: <GPIO controller> on gpio3
gpio4: <Freescale i.MX GPIO Controller> mem 0x20ac000-0x20affff irq 35,36 on simplebus1
gpiobus4: <GPIO bus> on gpio4
gpioc4: <GPIO controller> on gpio4
gpio5: <Freescale i.MX GPIO Controller> mem 0x20b0000-0x20b3fff irq 37,38 on simplebus1
gpiobus5: <GPIO bus> on gpio5
gpioc5: <GPIO controller> on gpio5
gpio6: <Freescale i.MX GPIO Controller> mem 0x20b4000-0x20b7fff irq 39,40 on simplebus1
gpiobus6: <GPIO bus> on gpio6
gpioc6: <GPIO controller> on gpio6
imx_wdog0: <Freescale i.MX Watchdog> mem 0x20bc000-0x20bffff irq 42 on simplebus1
usbphy0: <Freescale i.MX6 USB PHY> mem 0x20c9000-0x20c9fff irq 50 on simplebus1
usbphy1: <Freescale i.MX6 USB PHY> mem 0x20ca000-0x20cafff irq 51 on simplebus1
src0: <Freescale i.MX6 System Reset Controller> mem 0x20d8000-0x20dbfff irq 54,55 on simplebus1
ehci0: <Freescale i.MX integrated USB controller> mem 0x2184000-0x21841ff irq 73 on simplebus3
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci1: <Freescale i.MX integrated USB controller> mem 0x2184200-0x21843ff irq 74 on simplebus3
usbus1: EHCI version 1.0
usbus1 on ehci1
ffec0: <Freescale Gigabit Ethernet Controller> mem 0x2188000-0x218bfff irq 77,78 on simplebus3
miibus0: <MII bus> on ffec0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 4 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ffec0: Ethernet address: d0:63:b4:00:99:69
sdhci_imx0: <Freescale uSDHC controller> mem 0x2190000-0x2193fff irq 82 on simplebus3
mmc0: <MMC/SD bus> on sdhci_imx0
sdhci_imx1: <Freescale uSDHC controller> mem 0x2194000-0x2197fff irq 83 on simplebus3
mmc1: <MMC/SD bus> on sdhci_imx1
iichb0: <Freescale i.MX I2C> mem 0x21a4000-0x21a7fff irq 87 on simplebus3
iicbus0: <OFW I2C bus> on iichb0
iic0: <I2C generic I/O> on iicbus0
iichb1: <Freescale i.MX I2C> mem 0x21a8000-0x21abfff irq 88 on simplebus3
iicbus1: <OFW I2C bus> on iichb1
iic1: <I2C generic I/O> on iicbus1
iicbus1: <unknown card> at addr 0xd0
uart1: <Freescale i.MX UART> mem 0x21f0000-0x21f3fff irq 95 on simplebus3
fb0: <Freescale IPU> mem 0x2400000-0x27fffff irq 12,13 on simplebus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
cryptosoft0: <software crypto>
Timecounters tick every 2.000 msec
hdmi0: reading EDID from iicbus0, addr 50
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Freescale EHCI root HUB> at usbus0
uhub0: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Freescale EHCI root HUB> at usbus1
uhub1: <Freescale EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
fbd0 on fb0
VT: initialize with new VT driver "fb".
mmc0: No compatible cards found on bus
mmcsd0: 4GB <SDHC SS04G 8.0 SN 532C48EE MFG 12/2015 by 3 SD> at mmc1 50.0MHz/4bit/65535-block
Release APs
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
WARNING: /releng/11-armv6-CUBOX-HUMMINGBOARD-snap/usr/obj/usr/src/release/ufs was not properly dismounted
warning: no time-of-day clock registered, system time will not be set accurately
random: unblocking device.
ffec0: link state changed to DOWN
ffec0: link state changed to UP
freebsd at imx6:~ %
freebsd at imx6:~ %
freebsd at imx6:~ % shutdown --help
/sbin/shutdown: Permission denied.

-----Message d'origine-----
De : wlosh at bsdimp.com [mailto:wlosh at bsdimp.com] De la part de Warner Losh
Envoyé : jeudi 1 septembre 2016 17:23
À : LE TUTOUR Jean
Cc : freebsd-arm at freebsd.org
Objet : Re: freeBsd cubox IMX6-Q - SD Card image

Does ftp://ftp.freebsd.org/pub/FreeBSD/releases/arm/armv6/ISO-IMAGES/11.0/FreeBSD-11.0-RC2-arm-armv6-CUBOX-HUMMINGBOARD.img.xz
work for you?

Warner

On Thu, Sep 1, 2016 at 6:46 AM, LE TUTOUR Jean <jletutour at deltadore.com> wrote:
> Hello,
>
> Could i have this ?
> Thanks a lot
>
> Best regards
>
>
>
>
> Jean LE TUTOUR
> Service R&I
> DELTA DORE
> Le Vieux Chene
> 35270 Bonnemain
>
> +33632296922
> +33299734828
>
> [http://mail.deltadore.com/images/logo_deltadore_coul.GIF]
> http://www.deltadore.fr
>
> *******************************
> Ce message et toutes les pi?ces jointes sont ?tablis ? l' attention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le d?truire et d'en avertir imm?diatement l'exp?diteur.
>
> This message and any attachments are intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender.
> *******************************
> _______________________________________________
> freebsd-arm at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-arm
> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
[http://mail.deltadore.com/images/logo_deltadore_coul.GIF]
http://www.deltadore.fr

*******************************
Ce message et toutes les pièces jointes sont établis à l' attention exclusive de ses destinataires et sont confidentiels. Si vous recevez ce message par erreur, merci de le détruire et d'en avertir immédiatement l'expéditeur.

This message and any attachments are intended solely for the addressees and is confidential. If you receive this message in error, please delete it and immediately notify the sender.
*******************************