mounting USB drive at boot
freebsd-arm at wynn.com
freebsd-arm at wynn.com
Fri Feb 10 01:28:38 UTC 2017
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Paul Mather said;
>
> I was having the same problem and found that adding this line
> to /boot/loader.conf solved the problem for me:
>
> kern.cam.boot_delay="10000"
>
>
> That instructs the system to wait 10 seconds during boot to give time
> for the CAM subsystem probes to complete.
>
> Cheers,
>
> Paul.
>
Thanks so much everyone for that pointer! No idea why I did not find
it in the handbook.
Building a kernel on the usb stick now just to stress test things.
Will fix loader.conf and reboot when done. It should be interesting to
see how long a kernel build takes. While the BeagleBone is much
faster than the Sun 3 I built my first kernel on it is taking much
more time. Maybe usbflash drive write speeds are holding me back.
- -Brett
- --
wynkoop at wynn.com
917-642-6925
929-272-0000
Amendment I
Congress shall make no law respecting an establishment of religion, or
prohibiting the free exercise thereof; or abridging the freedom of
speech, or of the press; or the right of the people peaceably to
assemble, and to petition the government for a redress of grievances.
-----BEGIN PGP SIGNATURE-----
iQEcBAEBCAAGBQJYnRc/AAoJEK6K3yrc+RuDfOUIAI93Vc2213j5LNY8tc1TWc7I
fSgkiRCGj4ys1O5dS3Nc9k30nVJCz/cNShGRSmIAnFYGAMlNxDsOxdxbPsl5BUvA
qKi8u1MbJEtcj+ws6+Z9LwrHwRmFfBL4N77HmtR1Rtowr7AKK9lF+eWxDYk/bJpO
UUt8nWr3ESAi3bW/aLGZpGS86BOCGXsn36sAJT5CDXUU+xgE26Prh1OEKIVk4ne3
PEEmy9dMP8vM50LfW7nrFoAENABgVsomyAwbr1lO1dRTXGW7EuXN1C5OaVJvvYYd
k/RgEy9EtWk1vE0SX0TokfDKZwMGMRZPln9QkuYNrt1fDWds7/hGm9KBpinZ8K8=
=FKjA
-----END PGP SIGNATURE-----
More information about the freebsd-arm
mailing list