state of FreeBSD ARM (less stable than 6 months ago)

[Paul Khavkine]

I've had r282694 crash twice today while trying to build gettext, doesn't
seem to be sd card related.
Is there a guide on how to set up dumping on a crash? I don't have a serial
cable for it and the keyboard stops working once it goes into kdb.

Thanks

On Tue, May 12, 2015 at 12:10 AM, Paul Khavkine <pkhavkine at gmail.com> wrote:

> I've had r282694 crash twice today while trying to build gettext, doesn't
> seem to be sd card related.
> Is there a guide on how to set up dumping on a crash? I don't have a
> serial cable for it and the keyboard stops working once it goes into kdb.
>
> Thanks
> Paul
>
>
> On Mon, May 11, 2015 at 11:47 PM, Dan Raymond <draymond at foxvalley.net>
> wrote:
>
>> On 5/11/2015 9:13 AM, Mark Felder wrote:
>>
>>> On Mon, May 11, 2015, at 09:53, Dan Raymond wrote:
>>>
>>>> I've been running an email and web server using FreeBSD 11 on a
>>>> Raspberry Pi B+ since November.  It has crashed 3 times since then
>>>> (roughly every two months).  I'm currently running r277334.  I thought
>>>> I'd try the latest build to see if stability has improved. I purchased a
>>>> Raspberry Pi 2 and used the latest crochet to built r282738.  No
>>>> problems building it and it booted up fine.  However, it crashes about
>>>> an hour into building some ports I use for my server (nginx, php,
>>>> etc.).  I tried twice last night and it crashed both times.  Is anybody
>>>> looking into these stability issues?
>>>>
>>>>  RPi2 support is something like less than a week old for SMP and DMA
>>> transport. I'm not sure more than a handful of people have actually
>>> tried it yet. The bugs here will be worked out in time, but if you have
>>> any core dumps or info that can assist in tracking down issues you're
>>> experiencing that would certainly be appreciated.
>>>
>>>
>> These panics always seem to be mmcsd related.  I doubt it has anything to
>> do with RPi2 or SMP.
>>
>> sdhci_bcm0-slot0:  Controller timeout
>> sdhci_bcm0-slot0: ============== REGISTER DUMP ==============
>> sdhci_bcm0-slot0: Sys addr: 0x4d295a00 | Version:  0x00009902
>> sdhci_bcm0-slot0: Blk size: 0x00000200 | Blk cnt:  0x00000020
>> sdhci_bcm0-slot0: Argument: 0x002d19c0 | Trn mode: 0x0000193a
>> sdhci_bcm0-slot0: Present:  0x01ff0506 | Host ctl: 0x00000003
>> sdhci_bcm0-slot0: Power:    0x0000000f | Blk gap:  0x00000000
>> sdhci_bcm0-slot0: Wake-up:  0x00000000 | Clock:    0x00000507
>> sdhci_bcm0-slot0: Timeout:  0x0000000e | Int stat: 0x00000010
>> sdhci_b
>>
>>
>>
>> mmcsd0: Error indicated: 1 Timeout
>> g_vfs_done():mmcsd0s2a[WRITE(offset=1460830208, length=24576)]error = 5
>> panic: No b_bufobj 0xd767ca00
>> cpuid = 1
>> KDB: enter: panic
>> [ thread pid 12 tid 100013 ]
>> Stopped at      $d.7:   ldrb   r15, [r15, r15, ror r15]!
>> db>
>>
>>
>> _______________________________________________
>> freebsd-arm at freebsd.org mailing list
>> http://lists.freebsd.org/mailman/listinfo/freebsd-arm
>> To unsubscribe, send any mail to "freebsd-arm-unsubscribe at freebsd.org"
>>
>
>