Hummingboard u-boot not loading?

[Russell Haley]

Well I have seen what I think is ubldr get loaded by u-boot. I see the
following message:

20647 bytes read in 26 ms (9.6MiB/s)

And then nothing. I am hoping this mean ubldr successfully loaded. The
lack of the rest of the output seems to make me think, well, I don't
know what to think. Is the output going to the serial console I don't
currently have? Just because it read the file doesn't mean that
bootelf worked? I don't have anything in a loader.conf file yet so
that may also be the problem.

Ian, thanks for chiming in. I want to keep going with the binary that
Gonzo gave me but I will look back at the pkgng image once I get a
full boot happening.

As usual, all suggestions welcome.

Thanks,
Russ

On Sun, Aug 2, 2015 at 10:26 AM, Russell Haley <russ.haley at gmail.com> wrote:
> Hi guys,
>
> No, I don't have a serial cable yet. I have ordered an FDTI cable and
> should have it this week. Oleksandr gave me a binary that is working
> right now, I will try out the new patch as soon as I have the FDTI
> cable and can get debug output.
>
> okay, on to the next problem...
>
> Russ
>
> On Sun, Aug 2, 2015 at 9:02 AM, Mikaël Urankar <mikael.urankar at gmail.com> wrote:
>> 2015-08-02 5:57 GMT+02:00 Russell Haley <russ.haley at gmail.com>:
>>> Thanks Mikael,
>>>
>>> I was able to build using the patches you provided and the binary
>>> u-boot.imx is the exact same size as the one from pkgng. However,
>>> nothing happens when I boot it:
>>
>> I've updated my patch, it works on my cubox.
>> http://mikael.urankar.free.fr/FreeBSD/arm/patches/sysutils_u-boot-cubox-hummingboard_gcc-5.2.patch
>>
>> The patches come from here:
>> https://github.com/OpenELEC/OpenELEC.tv/tree/master/packages/tools/u-boot/patches
>> http://u-boot.denx.narkive.com/XoUw8ZsY/patch-arm-switch-to-mno-unaligned-access-when-supported-by-the-compiler