U-boot for Banana Pi

[TooMeeK Admin]

More device details under u-boot-sunxi-with-spl.bin fron Bananapi 
compilation:

Command:
echo "bdinfo; coninfo; fatinfo mmc 0:1; fatinfo mmc 0:2; flinfo; imls; 
mmcinfo; fatls mmc 0:1" > boot.cmd

U-Boot SPL 2014.04-10704-gf625d1d (Aug 16 2014 - 23:44:23)
Board: Bananapi
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600



U-Boot 2014.04-10704-gf625d1d (Aug 16 2014 - 23:44:23) Allwinner Technology

CPU: Allwinner A20 (SUN7I)
Board: Bananapi
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In: serial
Out: serial
Err: serial
Net: dwmac.1c50000
Hit any key to stop autoboot: 2  1  0
reading uEnv.txt
** Unable to read file uEnv.txt **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading boot.scr
160 bytes read in 21 ms (6.8 KiB/s)
Jumping to boot.scr
## Executing script at 44000000
arch_number = 0x000010BB
boot_params = 0x40000100
DRAM bank = 0x00000000
-> start = 0x40000000
-> size = 0x40000000
eth0name = dwmac.1c50000
ethaddr = 02:50:07:83:05:61
current eth = dwmac.1c50000
ip_addr = <NULL>
baudrate = 115200 bps
TLB addr = 0x7FFF0000
relocaddr = 0x7FF86000
reloc off = 0x35F86000
irq_sp = 0x7FB65EF0
sp start = 0x7FB65EE0
List of available devices:
serial 80000003 SIO stdin stdout stderr
eserial4 00000003 .IO
eserial3 00000003 .IO
eserial2 00000003 .IO
eserial1 00000003 .IO
eserial0 00000003 .IO
Interface: MMC
Device 0: Vendor: Man 000003 Snr c3de9500 Rev: 0.1 Prod: SU01G€
Type: Removable Hard Disk
Capacity: 942.5 MB = 0.9 GB (1930240 x 512)
Filesystem: FAT16 "NO_NAME "

** Unable to use mmc 0:2 for fatinfo **
Unknown command 'flinfo' - try 'help'
Unknown command 'imls' - try 'help'
Device: SUNXI SD/MMC
Manufacturer ID: 3
OEM: 5344
Name: SU01G
Tran Speed: 25000000
Rd Block Len: 512
SD version 2.0
High Capacity: No
Capacity: 942.5 MiB
Bus Width: 4-bit
4835460 kernel
160 boot.scr

2 file(s)

Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading script.bin
** Unable to read file script.bin **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
sun7i#

These values match Cubieboard's 2 output.

Cheers,
TooMeeK