U-boot for Banana Pi
TooMeeK Admin
maps at toomeek.waw.pl
Fri Aug 15 17:15:25 UTC 2014
Do You mean this?
https://github.com/tsgan/allwinner_a10
Is it for A20 too? I'll take a look.
I've also found Your discussion here:
http://www.marshut.net/qmqum/booting-kernel-on-cubieboard-mele-a-1000-allwiner-a10.html#qntuw
but it uses ubldr..
Kernel doesn't start with:
reg = < 0x40000000 0x40000000 >; /* 1024MB RAM */
and I don't know why, it's not loaded: no FreeBSD trademarks, nothing...
I know these values are correct, because size fits:
## Executing script at 44000000
arch_number = 0x000010BB
boot_params = 0x40000100
DRAM bank = 0x00000000
-> start = 0x40000000
-> size = 0x40000000
However, it starts with:
reg = < 0x40000000 0x30000000 >; /* 768MB RAM */
in /usr/src/sys/boot/fdt/dts/bananapi.dts
and stops during booting on USB detection...
U-Boot SPL 2013.07-07794-gc0f3b94 (Aug 15 2013 - 18:01:45)
Board: Cubieboard2
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
SUNXI SD/MMC: 0
U-Boot 2013.07-07794-gc0f3b94 (Aug 15 2013 - 18:01:45) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
Board: Cubieboard2
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: emac
Hit any key to stop autoboot: 3 2 1 0
reading uEnv.txt
** Unable to read file uEnv.txt **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading boot.scr
119 bytes read in 3 ms (38.1 KiB/s)
Jumping to boot.scr
## Executing script at 44000000
reading kernel
4835460 bytes read in 422 ms (10.9 MiB/s)
## Starting application at 0x40200100 ...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #8: Fri Aug 15 20:56:50 CEST 2014
root at freebsd:/usr/obj/arm.armv6/usr/src/sys/BANANAPI arm
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Cortex A7 rev 4 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory = 805306368 (768 MB)
avail memory = 780681216 (744 MB)
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
simplebus0: <Flattened device tree simple bus> on fdtbus0
gic0: <ARM Generic Interrupt Controller> mem
0x1c81000-0x1c81fff,0x1c82000-0x1c820ff on simplebus0
gic0: pn 0x10, arch 0x2, rev 0x1, implementer 0x43b nirqs 160
a20_cpu_cfg0: <A20 CPU Configuration Module> mem 0x1c25c00-0x1c25fff on
simplebus0
a10_ccm0: <Allwinner Clock Control Module> mem 0x1c20000-0x1c203ff on
simplebus0
a10_timer0: <Allwinner A10/A20 timer> mem 0x1c20c00-0x1c20c8f irq 54 on
simplebus0
Event timer "a10_timer Eventtimer" frequency 24000000 Hz quality 1000
Timecounter "a10_timer timer0" frequency 24000000 Hz quality 1000
a10wd0: <Allwinner A10 Watchdog> mem 0x1c20c90-0x1c20c9f on simplebus0
gpio0: <Allwinner GPIO controller> mem 0x1c20800-0x1c20bff irq 60 on
simplebus0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c14000-0x1c14fff
irq 71 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1cfff
irq 72 on simplebus0
Which is very strange to me.
Fallback to 512MB with / on flash USB ends in almost complete OS boot :)
U-Boot SPL 2013.07-07794-gc0f3b94 (Aug 15 2013 - 18:01:45)
Board: Cubieboard2
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
SUNXI SD/MMC: 0
U-Boot 2013.07-07794-gc0f3b94 (Aug 15 2013 - 18:01:45) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
Board: Cubieboard2
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: emac
Hit any key to stop autoboot: 3 2 1 0
reading uEnv.txt
** Unable to read file uEnv.txt **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
reading boot.scr
119 bytes read in 3 ms (38.1 KiB/s)
Jumping to boot.scr
## Executing script at 44000000
reading kernel
4835460 bytes read in 422 ms (10.9 MiB/s)
## Starting application at 0x40200100 ...
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 10.0-RELEASE #9: Fri Aug 15 21:03:16 CEST 2014
root at freebsd:/usr/obj/arm.armv6/usr/src/sys/BANANAPI arm
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
WARNING: WITNESS option enabled, expect reduced performance.
CPU: Cortex A7 rev 4 (Cortex-A core)
Supported features: ARM_ISA THUMB2 JAZELLE THUMBEE ARMv4 Security_Ext
WB disabled EABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
256KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory = 536870912 (512 MB)
avail memory = 517558272 (493 MB)
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
simplebus0: <Flattened device tree simple bus> on fdtbus0
gic0: <ARM Generic Interrupt Controller> mem
0x1c81000-0x1c81fff,0x1c82000-0x1c820ff on simplebus0
gic0: pn 0x10, arch 0x2, rev 0x1, implementer 0x43b nirqs 160
a20_cpu_cfg0: <A20 CPU Configuration Module> mem 0x1c25c00-0x1c25fff on
simplebus0
a10_ccm0: <Allwinner Clock Control Module> mem 0x1c20000-0x1c203ff on
simplebus0
a10_timer0: <Allwinner A10/A20 timer> mem 0x1c20c00-0x1c20c8f irq 54 on
simplebus0
Event timer "a10_timer Eventtimer" frequency 24000000 Hz quality 1000
Timecounter "a10_timer timer0" frequency 24000000 Hz quality 1000
a10wd0: <Allwinner A10 Watchdog> mem 0x1c20c90-0x1c20c9f on simplebus0
gpio0: <Allwinner GPIO controller> mem 0x1c20800-0x1c20bff irq 60 on
simplebus0
gpioc0: <GPIO controller> on gpio0
gpiobus0: <GPIO bus> on gpio0
ehci0: <Allwinner Integrated USB 2.0 controller> mem 0x1c14000-0x1c14fff
irq 71 on simplebus0
usbus0: EHCI version 1.0
usbus0 on ehci0
ehci1: <Allwinner Integrated USB 2.0 controller> mem 0x1c1c000-0x1c1cfff
irq 72 on simplebus0
usbus1: EHCI version 1.0
usbus1 on ehci1
uart0: <16750 or compatible> mem 0x1c28000-0x1c283ff irq 33 on simplebus0
uart0: console (115200,n,8,1)
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Allwinner> at usbus0
uhub0: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Allwinner> at usbus1
uhub1: <Allwinner EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
random: unblocking device.
WARNING: WITNESS option enabled, expect reduced performance.
uhub1: 1 port with 1 removable, self powered
uhub0: 1 port with 1 removable, self powered
Root mount waiting for: usbus1 usbus0
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.2: <USB> at usbus0
umass0: <USB Flash Drive, class 0/0, rev 2.00/1.00, addr 2> on usbus0
umass0: SCSI over Bulk-Only; quirks = 0x4101
umass0:0:0:-1: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <USB DISK 1.00> Removable Direct Access SCSI-2 device
da0: 40.000MB/s transfers
da0: 3848MB (7881824 512 byte sectors: 255H 63S/T 490C)
da0: quirks=0x2<NO_6_BYTE>
Trying to mount root from ufs:/dev/da0 []...
warning: no time-of-day clock registered, system time will not be set
accurately
Setting hostuuid: 967d139f-24a3-11e4-a1ad-0931cee82337.
Setting hostid: 0x438e041a.
Entropy harvesting: interrupts ethernet point_to_point swi.
eval: cannot open /etc/fstab: No such file or directory
fstab: /etc/fstab:0: No such file or directory
Warning! No /etc/fstab: skipping disk checks.
fstab: /etc/fstab:0: No such file or directory
Mounting local file systems:fstab: /etc/fstab:0: No such file or directory
.
Writing entropy file:.
/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
Starting Network: lo0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
Starting devd.
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
fstab: /etc/fstab:0: No such file or directory
fstab: /etc/fstab:0: No such file or directory
fstab: /etc/fstab:0: No such file or directory
Creating and/or trimming log files.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:fstab: /etc/fstab:0: No such file or directory
.
fstab: /etc/fstab:0: No such file or directory
Any clues here?
Thank You so far for help!
Cheers,
TooMeeK
W dniu 2014-08-15 17:20, Ganbold Tsagaankhuu pisze:
>
>
> There is no mmc/sd driver for A10/A20 SoC in src tree. But you can try
> Alexander Fedorov's mmc driver, look for older threads or you can contact
> him directly.
>
> Ganbold
>
>
>
>
More information about the freebsd-arm
mailing list