BBB CPU clock (was: Re: FreeBSD on Cubieboard 2, UDOO and Galaxy Note 10.1 (Exynos).
Jia-Shiun Li
jiashiun at gmail.com
Mon Oct 28 17:16:33 UTC 2013
It is interesting that image built last week can boot at slightly
higher clock of 700MHz Instead of 650 previously. Maybe because it's
getting cooler outside? ;)
Well it still did not overcome 800MHz. I noticed that after stucking
at uhub for about 20 seconds, the console printed the random device
line. Since now I know putty can send break, I tried to break and got
the following result. Seems something got missed and is never waken
up? I wonder what can cause this and is related to CPU/MPC clock. The
clock domains on the AM335x seem to be designed isolated well to be
set independently without affecting others.
Timecounters tick every 10.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen1.1: <Mentor Graphics> at usbus1
uhub0: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr
1> on usbus1
ugen0.1: <Mentor Graphics> at usbus0
uhub1: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr
1> on usbus0
mmcsd0: 8GB <SDHC SD08G 3.8 SN 3350384791 MFG 05/2009 by 2 TM> at mmc0
48.0MHz/4bit/65535-block
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
random: unblocking device.
KDB: enter: Break to debugger
[ thread pid 10 tid 100002 ]
Stopped at $d: ldrb r15, [r15, r15, ror r15]!
db> show all proc
pid ppid pgrp uid state wmesg wchan cmd
3 0 0 0 DL jobqueue 0xc27a5080 [mmcsd0: mmc/sd card]
14 0 0 0 DL (threaded) [usb]
100041 D - 0xc287f26c [usbus1]
100040 D - 0xc287f23c [usbus1]
100039 D - 0xc287f20c [usbus1]
100038 D - 0xc287f1dc [usbus1]
100036 D - 0xc287e0bc [usbus0]
100035 D - 0xc287e08c [usbus0]
100034 D - 0xc287e05c [usbus0]
100033 D - 0xc287e02c [usbus0]
2 0 0 0 DL (threaded) [cam]
100043 D ccb_scan 0xc065d658 [scanner]
100014 D - 0xc065d600 [doneq0]
13 0 0 0 DL - 0xc0660490 [rand_harvestq]
12 0 0 0 DL (threaded) [geom]
100008 D - 0xc07d4764 [g_down]
100007 D - 0xc07d4760 [g_up]
100006 D - 0xc07d475c [g_event]
11 0 0 0 WL (threaded) [intr]
100037 I [intr19: musbotg0]
100032 I [intr18: musbotg0]
100031 I [intr17: musbotg0]
100030 I [intr70: iichb0]
100029 I [intr43: cpsw0]
100028 I [intr41: cpsw0]
100027 I [intr40: cpsw0]
100026 I [intr28: sdhci_ti1]
100025 I [intr64: sdhci_ti0]
100024 I [intr14: ti_edma30]
100023 I [intr13: ti_edma30]
100022 I [intr12: ti_edma30]
100021 I [swi0: uart]
100020 I [intr99: gpio0]
100019 I [intr98: gpio0]
100018 I [intr97: gpio0]
100017 I [intr96: gpio0]
100013 I [swi5: fast taskq]
100011 I [swi6: Giant taskq]
100010 I [swi6: task queue]
100005 I [swi3: vm]
100004 I [swi4: clock]
100003 I [swi1: netisr 0]
10 0 0 0 RL CPU 0 [idle]
1 0 0 0 ?L [kernel]
0 0 0 0 DLs (threaded) [kernel]
100042 D - 0xc27a4780 [CAM taskq]
100016 D - 0xc27a3c80 [kqueue taskq]
100015 D - 0xc27a3d00 [ffs_trim taskq]
100012 D - 0xc27a4880 [thread taskq]
100000 D mmcreq 0xc08c2b70 [swapper]
db>
Jia-Shiun.
More information about the freebsd-arm
mailing list