Changes to Armada XP

[Kevin Lo]

Zbigniew Bodek wrote:
> Hello Everyone.

Hi Zbigniew,

>
> Patches 0002 & 0003 are committed:
> http://svnweb.freebsd.org/base?view=revision&revision=257171
> http://svnweb.freebsd.org/base?view=revision&revision=257170
>
> Patches 0004-0008 will be committed on Monday.

Just did a quick test, all seems to be working fine.  Thanks!
Here's the dmesg:

## Starting application at 0x00200000 ...
WARNING: could not re-initialise decode windows! Running with existing 
settings.
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.0-CURRENT #6 r257234M: Mon Oct 28 14:13:23 CST 2013
     kevlo at ax3.kevlo.org:/usr/obj/arm.armv6/usr/src/sys/ARMADAXP arm
FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
module mvs already present!
CPU: Sheeva 88SV584x rev 2 (Marvell core)
  Supported features: ARM_ISA THUMB2 THUMBEE ARMv4
  WB enabled LABT branch prediction enabled
LoUU:2 LoC:2 LoUIS:2
Cache level 1:
  32KB/32B 8-way data cache WT WB Read-Alloc Write-Alloc
  32KB/32B 4-way instruction cache Read-Alloc
Cache level 2:
  1024KB/32B 16-way unified cache WT WB Read-Alloc
real memory  = 2147483648 (2048 MB)
avail memory = 2096336896 (1999 MB)
SOC: Marvell MV78460, TClock 250MHz
   Instruction cache prefetch enabled, data cache prefetch disabled
WARNING: Some AP's failed to start
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
random device not loaded; using insecure entropy
random: <Software, Yarrow> initialized
fdtbus0: <Flattened Device Tree>
simplebus0: <Flattened device tree simple bus> on fdtbus0
mpic0: <Marvell Integrated Interrupt Controller> mem 
0xd0020a00-0xd0020eff,0xd00
rtc0: <Marvell Integrated RTC> mem 0xd0010300-0xd0010307 on simplebus0
timer0: <Marvell CPU Timer> mem 0xd0021840-0xd002186f irq 5 on simplebus0
Event timer "CPUTimer0" frequency 25000000 Hz quality 1000
Timecounter "CPUTimer1" frequency 25000000 Hz quality 1000
twsi0: <Marvell Integrated I2C Bus Controller> mem 0xd0011000-0xd001101f 
irq 310
iicbus0: <Philips I2C bus> on twsi0
iic0: <I2C generic I/O> on iicbus0
twsi1: <Marvell Integrated I2C Bus Controller> mem 0xd0011100-0xd001111f 
irq 320
iicbus1: <Philips I2C bus> on twsi1
iic1: <I2C generic I/O> on iicbus1
uart0: <16550 or compatible> mem 0xd0012000-0xd001201f irq 41 on simplebus0
uart0: console (115200,n,8,1)
uart1: <16550 or compatible> mem 0xd0012100-0xd001211f irq 42 on simplebus0
uart2: <16550 or compatible> mem 0xd0012200-0xd001221f irq 43 on simplebus0
uart3: <16550 or compatible> mem 0xd0012300-0xd001231f irq 44 on simplebus0
ehci0: <Marvell Integrated USB 2.0 controller> mem 0xd0050000-0xd0050fff 
irq 120
usbus0: EHCI version 1.0
usbus0: set host controller mode
usbus0 on ehci0
ehci1: <Marvell Integrated USB 2.0 controller> mem 0xd0051000-0xd0051fff 
irq 120
usbus1: EHCI version 1.0
usbus1: set host controller mode
usbus1 on ehci1
ehci2: <Marvell Integrated USB 2.0 controller> mem 0xd0052000-0xd0052fff 
irq 120
usbus2: EHCI version 1.0
usbus2: set host controller mode
usbus2 on ehci2
sata0: <Marvell Integrated SATA Controller> mem 0xd00a0000-0xd00a5fff 
irq 55 on0
ata0: <Marvell Integrated SATA Channel> on sata0
ata1: <Marvell Integrated SATA Channel> on sata0
pcib0: <Marvell Integrated PCI/PCI-E Controller> mem 
0xd0040000-0xd0041fff irq 0
pci0: <PCI bus> on pcib0
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 480Mbps High Speed USB v2.0
ugen0.1: <Marvell> at usbus0
uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Marvell> at usbus1
uhub1: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ugen2.1: <Marvell> at usbus2
uhub2: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ada0 at ata0 bus 0 scbus0 target 0 lun 0
ada0: <SPCC Solid State Disk A10 111007> ATA-8 SATA 2.x device
ada0: Serial Number 00000000000000000021
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 122104MB (250069680 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
random: unblocking device.
Release APs
AP's not started
Root mount waiting for: usbus2 usbus1 usbus0
Swap zone entries reduced from 256257 to 170838.
uhub2: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
uhub0: 1 port with 1 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <vendor 0x0b95> at usbus0
axe0: <vendor 0x0b95 product 0x772b, rev 2.00/0.01, addr 2> on usbus0
Trying to mount root from ufs:/dev/ada0s2a []...
WARNING: /: TRIM flag on fs but disk does not support TRIM
Setting hostuuid: 642c609b-bfde-11d3-966a-4199bbd8a509.
Setting hostid: 0xa80327d2.
No suitable dump device was found.
Entropy harvesting: interrupts ethernet point_to_point swi.
Starting file system checks:
/dev/ada0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ada0s2a: clean, 29808986 free (1618 frags, 3725921 blocks, 0.0% 
fragmentat)
Mounting local file systems:.
Writing entropy file:.
Setting hostname: ax3.kevlo.org.
miibus0: <MII bus> on axe0
ukphy0: <Generic IEEE 802.3u media interface> PHY 16 on miibus0
ukphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, 
auto-flow
ue0: <USB Ethernet> on axe0
ue0: Ethernet address: 00:80:8e:8a:8f:75
ue0: link state changed to DOWN
Starting Network: lo0 ue0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
         inet6 ::1 prefixlen 128
         inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
         inet 127.0.0.1 netmask 0xff000000
         nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=8000b<RXCSUM,TXCSUM,VLAN_MTU,LINKSTATE>
         ether 00:80:8e:8a:8f:75
         media: Ethernet autoselect (none)
         status: no carrier
         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
Starting devd.
add net fe80::: gateway ::1
add net ff02::: gateway ::1
add net ::ffff:0.0.0.0: gateway ::1
add net ::0.0.0.0: gateway ::1
Generating host.conf.
Waiting 30s for the default route interface: ue0: link state changed to UP
(ue0)
Creating and/or trimming log files.
Starting syslogd.
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Setting date via ntp.
28 Oct 16:11:38 ntpdate[627]: step time server 140.109.1.10 offset 
436291885.86c
Clearing /tmp (X related).
Updating motd:.
Mounting late file systems:.
Performing sanity check on sshd configuration.
Starting sshd.
Starting sendmail_submit.
Starting sendmail_msp_queue.
Starting cron.
Starting background file system checks in 60 seconds.

Mon Oct 28 16:11:42 CST 2013

FreeBSD/arm (ax3.kevlo.org) (ttyu0)

login:

>
> Best regards
> Zbigniew Bodek

     Kevin