Unable to copy DTB into module directory
Alie Tan
alie at affle.com
Fri Feb 22 11:48:20 UTC 2013
On Fri, Feb 22, 2013 at 2:17 PM, Tim Kientzle <tim at kientzle.com> wrote:
>
> On Feb 21, 2013, at 10:07 PM, Tim Kientzle wrote:
>
> > On Feb 21, 2013, at 9:50 PM, Alie Tan wrote:
> >>
> >> I just built RasPi image and keeps getting this message:
> >>
> >> "unable to copy DTB into module directory"
> >>
> >> then the raspi reboot again and again.
> >
> > Try backing out r247045 and see if that fixes
> > it for you.
> >
> > Also try breaking into the U-Boot prompt
> > and entering
>
> Sorry, left out some steps here. (To clarify, this is a separate
> experiment to be done with an image that includes
> r247045). The instructions should say:
>
Fyi, Reverting r247045 didn't help my proble :-(
>
> 1) Remove the "fdt addr 0x100" command from loader.rc
>
> 2) Early in boot, break to the U-Boot prompt (hit any key during the
> 3-second countdown)
>
> 3) Enter these two commands to U-Boot
>
> U-Boot> fdt addr 0x100
> U-Boot> run bootcmd
>
> This way, U-Boot will identify the FDT and ubldr will
> get it from U-Boot (instead of ubldr accessing it
> directly).
>
> Tim
>
>
More information about the freebsd-arm
mailing list