could not process 'interrupts' property

[Jakob Alvermark]

On 29 apr 2013, at 11:54, Aleksander wrote:

> this info is also shown, when you have no interrupt decoding function. For example, for TI OMAP, the function is in sys/arm/ti/common.c [1]
> 
> [1] http://svnweb.freebsd.org/base/head/sys/arm/ti/common.c?revision=239281&view=markup
> 
Yes, thank you for pointing in the right direction. It was a simple typo.
Now on to the next problem...

> On Sun, Apr 28, 2013 at 10:39 PM, Jakob Alvermark <jakob at alvermark.net> wrote:
> Hi!
> 
> I got my hands on an Olinuxino A13
> (https://www.olimex.com/Products/OLinuXino/A13/A13-OLinuXino/)
> It is based on the Allwinner A13, which is a stripped down A10 (no SATA,
> HDMI, only one USB host, fewer UARTs)
> 
> Since we have (limited) A10 support in HEAD I thought I would give it a try.
> Starting from cubieboard I essentially just removed the second USB host
> and changed UART0 to UART1.
> When it boots I get the results below, "could not process 'interrupts'
> property".
> -- 
> regards
> aleek