patch for dreamplug on arm
Richard E Neese
r.neese at gmail.com
Thu Jul 5 23:49:43 UTC 2012
this is a svn diff of head with dreamplug files included
-------------- next part --------------
Index: sys/boot/fdt/dts/dreamplug.dts
===================================================================
--- sys/boot/fdt/dts/dreamplug.dts (revision 0)
+++ sys/boot/fdt/dts/dreamplug.dts (working copy)
@@ -0,0 +1,306 @@
+/*
+ * Copyright (c) 2010 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * This software was developed by Semihalf under sponsorship from
+ * the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Marvell DreamPlug Device Tree Source.
+ *
+ * $FreeBSD:$
+ */
+
+/dts-v1/;
+
+/ {
+ model = "mrvl,DreamPlug";
+ compatible = "DreamPlug";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ mpp = &MPP;
+ serial0 = &serial0;
+ serial1 = &serial1;
+ soc = &SOC;
+ sram = &SRAM;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "ARM,88FR131";
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x4000>; // L1, 16K
+ i-cache-size = <0x4000>; // L1, 16K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x20000000>; // 512M at 0x0
+ };
+
+ localbus at f1000000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "mrvl,lbc";
+
+ /* This reflects CPU decode windows setup. */
+ ranges = <0x0 0x0f 0xf9300000 0x00100000
+ 0x1 0x1e 0xfa000000 0x00100000
+ 0x2 0x1d 0xfa100000 0x02000000
+ 0x3 0x1b 0xfc100000 0x00000400>;
+
+ nor at 0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x00100000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ led at 1,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "led";
+ reg = <0x1 0x0 0x00100000>;
+ };
+
+ nor at 2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x2 0x0 0x02000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ nand at 3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x3 0x0 0x00100000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+ };
+
+ SOC: soc88f6281 at f1000000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0x0 0xf1000000 0x00100000>;
+ bus-frequency = <0>;
+
+ PIC: pic at 20200 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0x20200 0x3c>;
+ compatible = "mrvl,pic";
+ };
+
+ timer at 20300 {
+ compatible = "mrvl,timer";
+ reg = <0x20300 0x30>;
+ interrupts = <1>;
+ interrupt-parent = <&PIC>;
+ mrvl,has-wdt;
+ };
+
+ MPP: mpp at 10000 {
+ #pin-cells = <2>;
+ compatible = "mrvl,mpp";
+ reg = <0x10000 0x34>;
+ pin-count = <50>;
+ pin-map = <
+ 0 1 /* MPP[0]: NF_IO[2] */
+ 1 1 /* MPP[1]: NF_IO[3] */
+ 2 1 /* MPP[2]: NF_IO[4] */
+ 3 1 /* MPP[3]: NF_IO[5] */
+ 4 1 /* MPP[4]: NF_IO[6] */
+ 5 1 /* MPP[5]: NF_IO[7] */
+ 6 1 /* MPP[6]: SYSRST_OUTn */
+ 8 2 /* MPP[8]: UA0_RTS */
+ 9 2 /* MPP[9]: UA0_CTS */
+ 10 3 /* MPP[10]: UA0_TXD */
+ 11 3 /* MPP[11]: UA0_RXD */
+ 12 1 /* MPP[12]: SD_CLK */
+ 13 1 /* MPP[13]: SD_CMD */
+ 14 1 /* MPP[14]: SD_D[0] */
+ 15 1 /* MPP[15]: SD_D[1] */
+ 16 1 /* MPP[16]: SD_D[2] */
+ 17 1 /* MPP[17]: SD_D[3] */
+ 18 1 /* MPP[18]: NF_IO[0] */
+ 19 1 /* MPP[19]: NF_IO[1] */
+ 29 1 >; /* MPP[29]: TSMP[9] */
+ };
+
+ GPIO: gpio at 10100 {
+ #gpio-cells = <3>;
+ compatible = "mrvl,gpio";
+ reg = <0x10100 0x20>;
+ gpio-controller;
+ interrupts = <35 36 37 38 39 40 41>;
+ interrupt-parent = <&PIC>;
+ };
+
+ rtc at 10300 {
+ compatible = "mrvl,rtc";
+ reg = <0x10300 0x08>;
+ };
+
+ twsi at 11000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mrvl,twsi";
+ reg = <0x11000 0x20>;
+ interrupts = <43>;
+ interrupt-parent = <&PIC>;
+ };
+
+ enet0: ethernet at 72000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "V2";
+ compatible = "mrvl,ge";
+ reg = <0x72000 0x2000>;
+ ranges = <0x0 0x72000 0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <12 13 14 11 46>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy0>;
+
+ mdio at 0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "mrvl,mdio";
+
+ phy0: ethernet-phy at 0 {
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy at 1 {
+ reg = <0x1>;
+ };
+
+ };
+ };
+
+ enet1: ethernet at 74000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "V2";
+ compatible = "mrvl,ge";
+ reg = <0x74000 0x02000>;
+ ranges = <0x0 0x74000 0x2000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <16 17 18 15 47>;
+ interrupt-parent = <&PIC>;
+ phy-handle = <&phy1>;
+ };
+
+
+ serial0: serial at 12000 {
+ compatible = "ns16550";
+ reg = <0x12000 0x20>;
+ reg-shift = <2>;
+ clock-frequency = <0>;
+ interrupts = <33>;
+ interrupt-parent = <&PIC>;
+ };
+
+ serial1: serial at 12100 {
+ compatible = "ns16550";
+ reg = <0x12100 0x20>;
+ reg-shift = <2>;
+ clock-frequency = <0>;
+ interrupts = <34>;
+ interrupt-parent = <&PIC>;
+ };
+
+ crypto at 30000 {
+ compatible = "mrvl,cesa";
+ reg = <0x30000 0x10000>;
+ interrupts = <22>;
+ interrupt-parent = <&PIC>;
+
+ sram-handle = <&SRAM>;
+ };
+
+ usb at 50000 {
+ compatible = "mrvl,usb-ehci", "usb-ehci";
+ reg = <0x50000 0x1000>;
+ interrupts = <48 19>;
+ interrupt-parent = <&PIC>;
+ };
+
+ xor at 60000 {
+ compatible = "mrvl,xor";
+ reg = <0x60000 0x1000>;
+ interrupts = <5 6 7 8>;
+ interrupt-parent = <&PIC>;
+ };
+
+ sata at 80000 {
+ compatible = "mrvl,sata";
+ reg = <0x80000 0x6000>;
+ interrupts = <21>;
+ interrupt-parent = <&PIC>;
+ gpios = <&GPIO 29 1 0x00030000 /* GPIO[29]: IN_POL_LOW, IRQ (edge) */
+ &GPIO 34 2 0x00000000>; /* GPIO[34]: OUT */
+ };
+
+ sdio at 90000 {
+ compatible = "mrvl,sdio";
+ reg = <0x90000 0x134>;
+ interrupts = <28>;
+ interrupt-parent = <&PIC>;
+
+ gpios = <&GPIO 29 1 0x00030000 /* GPIO[29]: IN_POL_LOW, IRQ (edge) */
+ &GPIO 34 2 0x00000000>; /* GPIO[34]: OUT */
+
+ };
+ };
+
+ SRAM: sram at fd000000 {
+ compatible = "mrvl,cesa-sram";
+ reg = <0xfd000000 0x00100000>;
+ };
+
+ chosen {
+ stdin = "serial0";
+ stdout = "serial0";
+ };
+};
Index: sys/arm/mv/kirkwood/files.dreamplug
===================================================================
--- sys/arm/mv/kirkwood/files.dreamplug (revision 0)
+++ sys/arm/mv/kirkwood/files.dreamplug (working copy)
@@ -0,0 +1,4 @@
+# $FreeBSD:$
+
+include "arm/mv/kirkwood/files.kirkwood"
+arm/mv/kirkwood/dreamplug.c standard
Index: sys/arm/mv/kirkwood/dreamplug.c
===================================================================
--- sys/arm/mv/kirkwood/dreamplug.c (revision 0)
+++ sys/arm/mv/kirkwood/dreamplug.c (working copy)
@@ -0,0 +1,44 @@
+/*-
+ * Copyright (c) 2010 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * This software was developed by Semihalf under sponsorship from
+ * the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD:$");
+
+#include <dev/fdt/fdt_common.h>
+#include <dev/ofw/openfirm.h>
+
+#include <machine/fdt.h>
+
+int
+fdt_pci_devmap(phandle_t node, struct pmap_devmap *devmap, vm_offset_t io_va,
+ vm_offset_t mem_va)
+{
+
+ return (0);
+}
Index: sys/arm/mv/kirkwood/std.dreamplug
===================================================================
--- sys/arm/mv/kirkwood/std.dreamplug (revision 0)
+++ sys/arm/mv/kirkwood/std.dreamplug (working copy)
@@ -0,0 +1,5 @@
+# $FreeBSD:$
+
+include "../mv/std.mv"
+include "../mv/kirkwood/std.kirkwood"
+files "../mv/kirkwood/files.dreamplug"
Index: sys/arm/conf/DREAMPLUG
===================================================================
--- sys/arm/conf/DREAMPLUG (revision 0)
+++ sys/arm/conf/DREAMPLUG (working copy)
@@ -0,0 +1,164 @@
+#
+# Custom kernel for Marvell DreamPlug devices.
+#
+# $FreeBSD:$
+#
+
+ident DREAMPLUG
+include "../mv/kirkwood/std.dreamplug"
+
+options SOC_MV_KIRKWOOD
+makeoptions MODULES_OVERRIDE=""
+
+#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
+makeoptions WERROR="-Werror"
+
+options SCHED_4BSD #4BSD scheduler
+options INET #InterNETworking
+options INET6 #IPv6 communications protocols
+options FFS #Berkeley Fast Filesystem
+options NFSCL #New Network Filesystem Client
+options NFSLOCKD #Network Lock Manager
+options NFS_ROOT #NFS usable as /, requires NFSCL
+options BOOTP
+options BOOTP_NFSROOT
+options BOOTP_NFSV3
+options BOOTP_WIRED_TO=mge0
+
+# Root fs on USB device
+#options ROOTDEVNAME=\"ufs:/dev/da0a\"
+
+options SYSVSHM #SYSV-style shared memory
+options SYSVMSG #SYSV-style message queues
+options SYSVSEM #SYSV-style semaphores
+options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
+options MUTEX_NOINLINE
+options RWLOCK_NOINLINE
+options NO_FFS_SNAPSHOT
+options NO_SWAPPING
+
+# Debugging
+options ALT_BREAK_TO_DEBUGGER
+options DDB
+#options DEADLKRES #Enable the deadlock resolver
+options DIAGNOSTIC
+#options INVARIANTS #Enable calls of extra sanity checking
+#options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS
+options KDB
+options WITNESS #Enable checks to detect deadlocks and cycles
+options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed
+#options WITNESS_KDB
+
+# Pseudo devices
+device random
+device pty
+device loop
+
+# Serial ports
+device uart
+
+# Networking
+device ether
+device mge # Marvell Gigabit Ethernet controller
+device mii
+device e1000phy
+device bpf
+options HZ=1000
+options DEVICE_POLLING
+device vlan
+
+device cesa # Marvell security engine
+device crypto
+device cryptodev
+
+# USB
+options USB_DEBUG # enable debug msgs
+device usb
+device ehci
+device umass
+device scbus
+device pass
+device da
+
+# Flattened Device Tree
+options FDT
+options FDT_DTB_STATIC
+makeoptions FDT_DTS_FILE=dreamplug.dts
+
+# IPSec
+device enc
+options IPSEC
+options IPSEC_NAT_T
+options TCP_SIGNATURE #include support for RFC 2385
+
+# IPFW support
+options IPFIREWALL
+options IPFIREWALL_DEFAULT_TO_ACCEPT
+options IPFIREWALL_FORWARD
+options IPFIREWALL_VERBOSE
+options IPFIREWALL_VERBOSE_LIMIT=100
+options DUMMYNET
+options IPDIVERT
+
+# Partition support
+#options GEOM_PART_MBR
+#options GEOM_PART_BSD
+options GEOM_PART_GPT
+options GEOM_LABEL
+options GEOM_ELI
+
+# UFS
+options UFS_ACL
+options UFS_DIRHASH
+options SOFTUPDATES
+
+# FAT support
+options MSDOSFS
+
+# Misc FSs
+options PROCFS
+options PSEUDOFS
+
+# Sound
+device sound
+device snd_uaudio
+
+# I2C (TWSI)
+device iic
+device iicbus
+
+# SATA
+device mvs
+
+# altq(9). Enable the base part of the hooks with the ALTQ option.
+# Individual disciplines must be built into the base system and can not be
+# loaded as modules at this point. ALTQ requires a stable TSC so if yours is
+# broken or changes with CPU throttling then you must also have the ALTQ_NOPCC
+# option.
+options ALTQ
+options ALTQ_CBQ # Class Based Queueing
+options ALTQ_RED # Random Early Detection
+options ALTQ_RIO # RED In/Out
+options ALTQ_HFSC # Hierarchical Packet Scheduler
+options ALTQ_CDNR # Traffic conditioner
+options ALTQ_PRIQ # Priority Queueing
+options ALTQ_NOPCC # Required if the TSC is unusable
+#options ALTQ_DEBUG
+
+# MROUTING enables the kernel multicast packet forwarder, which works
+# with mrouted and XORP.
+options MROUTING # Multicast routing
+
+# Add device Polling
+options DEVICE_POLLING
+
+# Add multiple route table support
+options ROUTETABLES=16
+
+# eliminating data copies on socket reads and writes.
+# man 9 zero_copy
+options ZERO_COPY_SOCKETS
+
+#Enable the use of the IP forward feature
+#Reduce PPS
+#options IPFIREWALL_FORWARD
More information about the freebsd-arm
mailing list