OpenRD Ultimate SD card slot?

[Brian J. McGovern]

Thanks for the pointer. The problem I'm having with this patch (against
the CVS repository head of ~7/28) is that when it boots with the SD card
installed, it hangs after device probing (after the USB ports if my USD
flash drive is NOT installed, after probing da0 if it is). If I boot
without the SD card, the kernel panics on installation - I get a message
of "mv_gpio_intr_handler(): No handler for Pin 34", the mmc "mmc0:
<MMC/SD bus> on sdio0", a series of "sdio0: Error -bad command 55
checksum!", an "sdio0: Error - command 2 timeout!", and finally a
vm_fault with address and frame information that probably isn't useful
without a copy of the kernel.

I also did find another patch, but it resulted in an interrupt storm
when the SD card was installed.



On Thu, 2011-07-28 at 10:21 +0200, Arnaud wrote:
> Have a look to this thread :
> 
> http://thread.gmane.org/gmane.os.freebsd.devel.arm/2890
>