ichwd for ICH8
Mike Tancsa
mike at sentex.net
Mon May 14 16:29:28 UTC 2007
At 03:02 AM 5/1/2007, Dag-Erling Smørgrav wrote:
>Takeharu KATO <takeharu1219 at ybb.ne.jp> writes:
> > I wrote ICH7 or later support patch for sys/dev/ichwd watch dog driver.
> > I tested this patch on ICH8 compliant mother board(GIGA BYTE GA-965P-DS3).
> >
> > Please apply the patch.
>
>I will try to take care of this some time within the next two weeks.
>Feel free to contact me off-list if you have any updates.
Hi,
This applies cleanly to RELENG_6 and
actually works on my super micro board. The base ichwd does not
ichwd0: <Intel ICH5 watchdog timer> on isa0 # FreeBSD 6.2
ppc0: parallel port not found.
ichwd0: detaching
ichwd0: detached
ichwd module unloaded
ichwd module loaded
ichwd0: <Intel ICH5 watchdog timer> at port
0x1030-0x1037,0x1060-0x1069 on isa0 # RELENG_6
ppc0: parallel port not found.
ichwd0: detached
ichwd module unloaded
ichwd module loaded
ichwd0: <Intel ICH7 watchdog timer> at port
0x1030-0x1037,0x1060-0x1069 on isa0 # RELENG_6 plus current patch
ichwd0: Intel ICH7 watchdog timer (TCO version 2)
ppc0: parallel port not found.
isab0 at pci0:31:0: class=0x060100
card=0x798015d9 chip=0x27b88086 rev=0x01 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GB/GR (ICH7 Family) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
cap 09[e0] = vendor (length 12) Intel cap 1 version 0
features: Quick Resume, 4 PCI-e x1 slots
---Mike
More information about the freebsd-arch
mailing list