Neteasy DRP-32TXD ethernet problems on FreeBSD 6.0

[Lila]

John Baldwin ha scritto:
> 
> Patching the module should be fine.  Can you provide the output of dmesg
> after you have kldloaded the module?  Also, did the patch apply cleanly
> or where there any rejects?  And, what version are you testing this on?

I finally managed to build and install my kernel with patched drivers. 
I'm working with FreeBSD 6.0-out-of-the-box (waiting for ethernet before 
I can
Patch applied with no problem to both files.
I'm sorry but my kernel with no ethernet was unstable, so I could not 
get a dmesg when I kloaded if_de (it only worked once...)
Now the output when I insert my etherenet card (or I boot with card 
inserted) is this:

TUPLE: LINKTARGET [3]: 43 49 53
Manufacturer ID: d11302ab
Functions: Network Adaptor, Memory
Function Extension: 0102
Function Extension: 0280969800
Function Extension: 0200e1f505
Function Extension: 0301
Product version: 5.0
Product name: Neteasy | DRP-32TXD Cardbus PC Card | V1.0 |  |
TUPLE: Unknown(0x04) [6]: 03 01 2a 00 00 00
cardbus0: Opening BAR: type=IO, bar=10, len=0100
cardbus0: Opening BAR: type=MEM, bar=14, len=0400
CIS reading done
cardbus0: Non-prefetchable memory at 88000000-880003ff
cardbus0: IO port at 1000-10ff
found->	vendor=0x1186, dev=0x1561, revid=0x11
	bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0xa8 (5040 ns), mingnt=0xff (63750 ns), maxlat=0xff (63750 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
dc0: <Neteasy DRP-32TXD Cardbus 10/100> port 0x1000-0x10ff mem 
0x88000000-0x880003ff irq 10 at device 0.0 on cardbus0
dc0: MII without any PHY!
device_attach: dc0 attach returned 6

I'm googling the "MII without any PHY" problem but haven't found a 
solution right now.
thanks a lot for your attention.
Lila