amd64/165647: Regression between 9-RELEASE and 9-STABLE

Harry NEWTON hn at yewbarrow.net
Sat Mar 3 04:00:29 UTC 2012


>Number:         165647
>Category:       amd64
>Synopsis:       Regression between 9-RELEASE and 9-STABLE
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    freebsd-amd64
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Sat Mar 03 04:00:28 UTC 2012
>Closed-Date:
>Last-Modified:
>Originator:     Harry NEWTON
>Release:        9.0-STABLE
>Organization:
yewbarrow
>Environment:
FreeBSD hydra.yewbarrow.net 9.0-STABLE FreeBSD 9.0-STABLE #19: Fri Mar  2 22:28:14 GMT 2012     toor at hydra.yewbarrow.net:/usr/obj/usr/src/sys/HYDRA  amd64
>Description:
9-RELEASE works fine. csup to 9-STABLE and make buildworld kernel etc gives a system the hangs during the boot process.

There are no error messages during the part boot, and no panic. Last messages before hang are:

pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0

Fault lies somewhere in:

 Edit src/sys/dev/acpica/acpi.c
  Add delta 1.305.2.4 2012.02.23.22.26.14 jkim
 Edit src/sys/dev/acpica/acpi_ec.c
  Add delta 1.95.2.2 2012.02.23.22.26.14 jkim
 Edit src/sys/dev/acpica/acpi_hpet.c
  Add delta 1.38.2.2 2012.02.23.22.26.14 jkim
 Edit src/sys/dev/acpica/acpi_timer.c
  Add delta 1.50.2.3 2012.02.23.22.26.14 jkim
 Edit src/sys/dev/acpica/acpivar.h
  Add delta 1.125.2.4 2012.02.23.22.26.14 jkim

dmesg -v, pciconf, and csup out in attachment (.org structured).
>How-To-Repeat:
csup to STABLE after 2012.02.23.22.26.30, build, boot.
>Fix:


Patch attached with submission follows:

* dmesg
Table 'FACP' at 0x77fd0200
Table 'APIC' at 0x77fd0390
APIC: Found table at 0x77fd0390
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
SMP: Added CPU 0 (AP)
MADT: Found CPU APIC ID 1 ACPI ID 2: enabled
SMP: Added CPU 1 (AP)
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #19: Fri Mar  2 22:28:14 GMT 2012
    toor at hydra.yewbarrow.net:/usr/obj/usr/src/sys/HYDRA amd64
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel.old/kernel" at 0xffffffff80b6f000.
Calibrating TSC clock ... TSC clock: 2194794720 Hz
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.79-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Family = f  Model = 4b  Stepping = 2
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
real memory  = 2147483648 (2048 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
0x0000000000b9e000 - 0x0000000074722fff, 1941458944 bytes (473989 pages)
avail memory = 1926897664 (1837 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <030107 APIC1519>
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
x86bios:  IVT 0x000000-0x0004ff at 0xfffffe0000000000
x86bios: SSEG 0x001000-0x001fff at 0xffffff800020d000
x86bios: EBDA 0x09f000-0x09ffff at 0xfffffe000009f000
x86bios:  ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP 0xf96d0 00014 (v00 ACPIAM)
ACPI: RSDT 0x77fd0000 00038 (v01 030107 RSDT1519 20070301 MSFT 00000097)
ACPI: FACP 0x77fd0200 00084 (v02 030107 FACP1519 20070301 MSFT 00000097)
ACPI: DSDT 0x77fd0430 044A0 (v01  1ADNC 1ADNCB33 00000B33 INTL 20051117)
ACPI: FACS 0x77fde000 00040
ACPI: APIC 0x77fd0390 0005C (v01 030107 APIC1519 20070301 MSFT 00000097)
ACPI: MCFG 0x77fd03f0 0003C (v01 030107 OEMMCFG  20070301 MSFT 00000097)
ACPI: OEMB 0x77fde040 00071 (v01 030107 OEMB1519 20070301 MSFT 00000097)
ACPI: HPET 0x77fd48d0 00038 (v01 030107 OEMHPET  20070301 MSFT 00000097)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
nfslock: pseudo-device
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
acpi0: <030107 RSDT1519> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
ACPI: Executed 3 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of ffb80000, 80000 (3) failed
acpi0: reservation of fff80000, 80000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 77f00000 (3) failed
ACPI timer: 1/1 1/2 0/3 1/2 1/2 1/2 1/3 1/2 1/2 1/2 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
pci_link0:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    5   N     0  3 4 5 7 10 11 12 14 15
  Validation          0    5   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link1:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    3   N     0  3 4 5 7 10 11 12 14 15
  Validation          0    3   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link2:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link3:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   10   N     0  3 4 5 7 10 11 12 14 15
  Validation          0   10   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link4:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0    4   N     0  3 4 5 7 10 11 12 14 15
  Validation          0    4   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link5:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link6:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0   11   N     0  3 4 5 7 10 11 12 14 15
  Validation          0   11   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pci_link7:        Index  IRQ  Rtd  Ref  IRQs
  Initial Probe       0  255   N     0  3 4 5 7 10 11 12 14 15
  Validation          0  255   N     0  3 4 5 7 10 11 12 14 15
  After Disable       0  255   N     0  3 4 5 7 10 11 12 14 15
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x1002, dev=0x7910, revid=0x00
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x7912, revid=0x00
	domain=0, bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x1a (6500 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x7917, revid=0x00
	domain=0, bus=0, slot=7, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
	powerspec 3  supports D0 D3  current D0
	MSI supports 1 message
found->	vendor=0x1002, dev=0x4380, revid=0x00
	domain=0, bus=0, slot=18, func=0
	class=01-06-01, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x0230, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D3  current D0
	map[10]: type I/O Port, range 32, base 0xb000, size  3, enabled
	map[14]: type I/O Port, range 32, base 0xa000, size  2, enabled
	map[18]: type I/O Port, range 32, base 0x9000, size  3, enabled
	map[1c]: type I/O Port, range 32, base 0x8000, size  2, enabled
	map[20]: type I/O Port, range 32, base 0x7000, size  4, enabled
	map[24]: type Memory, range 32, base 0xfe7ff800, size 10, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 22
found->	vendor=0x1002, dev=0x4387, revid=0x00
	domain=0, bus=0, slot=19, func=0
	class=0c-03-10, hdrtype=0x00, mfdev=1
	cmdreg=0x0517, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	map[10]: type Memory, range 32, base 0xfe7fe000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 16
ohci early: SMM active, request owner change
found->	vendor=0x1002, dev=0x4388, revid=0x00
	domain=0, bus=0, slot=19, func=1
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=3
	map[10]: type Memory, range 32, base 0xfe7fd000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
ohci early: SMM active, request owner change
found->	vendor=0x1002, dev=0x4389, revid=0x00
	domain=0, bus=0, slot=19, func=2
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[10]: type Memory, range 32, base 0xfe7fc000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 18
ohci early: SMM active, request owner change
found->	vendor=0x1002, dev=0x438a, revid=0x00
	domain=0, bus=0, slot=19, func=3
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=3
	map[10]: type Memory, range 32, base 0xfe7fb000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
ohci early: SMM active, request owner change
found->	vendor=0x1002, dev=0x438b, revid=0x00
	domain=0, bus=0, slot=19, func=4
	class=0c-03-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02a0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=c, irq=10
	map[10]: type Memory, range 32, base 0xfe7fa000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 18
ohci early: SMM active, request owner change
found->	vendor=0x1002, dev=0x4386, revid=0x00
	domain=0, bus=0, slot=19, func=5
	class=0c-03-20, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=d, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfe7ff000, size  8, enabled
pcib0: matched entry for 0.19.INTD
pcib0: slot 19 INTD hardwired to IRQ 19
found->	vendor=0x1002, dev=0x4385, revid=0x13
	domain=0, bus=0, slot=20, func=0
	class=0c-05-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0403, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	map[10]: type I/O Port, range 32, base 0xb00, size  4, enabled
	map[14]: type Memory, range 32, base 0xfed00000, size 10, enabled
found->	vendor=0x1002, dev=0x438c, revid=0x00
	domain=0, bus=0, slot=20, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0005, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	MSI supports 1 message
	map[20]: type I/O Port, range 32, base 0xff00, size  4, enabled
found->	vendor=0x1002, dev=0x4383, revid=0x00
	domain=0, bus=0, slot=20, func=2
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=5
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfe7f4000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found->	vendor=0x1002, dev=0x438d, revid=0x00
	domain=0, bus=0, slot=20, func=3
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1002, dev=0x4384, revid=0x00
	domain=0, bus=0, slot=20, func=4
	class=06-04-01, hdrtype=0x01, mfdev=1
	cmdreg=0x0107, statreg=0x02a0, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x03 (750 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1100, revid=0x00
	domain=0, bus=0, slot=24, func=0
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1101, revid=0x00
	domain=0, bus=0, slot=24, func=1
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1102, revid=0x00
	domain=0, bus=0, slot=24, func=2
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x1103, revid=0x00
	domain=0, bus=0, slot=24, func=3
	class=06-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1:   domain            0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xc000-0xcfff
pcib1:   memory decode     0xfe800000-0xfe9fffff
pcib1:   prefetched decode 0xf0000000-0xf7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found->	vendor=0x1002, dev=0x791e, revid=0x00
	domain=0, bus=1, slot=5, func=0
	class=03-00-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Prefetchable Memory, range 64, base 0xf0000000, size 27, enabled
pcib1: requested memory range 0xf0000000-0xf7ffffff: good
	map[18]: type Memory, range 64, base 0xfe9f0000, size 16, enabled
pcib1: requested memory range 0xfe9f0000-0xfe9fffff: good
	map[20]: type I/O Port, range 32, base 0xc000, size  8, enabled
pcib1: requested I/O range 0xc000-0xc0ff: in range
	map[24]: type Memory, range 32, base 0xfe800000, size 20, enabled
pcib1: requested memory range 0xfe800000-0xfe8fffff: good
pcib1: matched entry for 1.5.INTA
pcib1: slot 5 INTA hardwired to IRQ 18
found->	vendor=0x1002, dev=0x7919, revid=0x00
	domain=0, bus=1, slot=5, func=2
	class=04-03-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	MSI supports 1 message, 64 bit
	map[10]: type Memory, range 64, base 0xfe9e8000, size 14, enabled
pcib1: requested memory range 0xfe9e8000-0xfe9ebfff: good
pcib1: matched entry for 1.5.INTB
pcib1: slot 5 INTB hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0xc000-0xc0ff mem 0xf0000000-0xf7ffffff,0xfe9f0000-0xfe9fffff,0xfe800000-0xfe8fffff irq 18 at device 5.0 on pci1
pci1: <multimedia, HDA> at device 5.2 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 7.0 on pci0
pcib2:   domain            0
pcib2:   secondary bus     2
pcib2:   subordinate bus   2
pcib2:   I/O decode        0xd000-0xdfff
pcib2:   memory decode     0xfea00000-0xfeafffff
pcib2:   no prefetched decode
pci2: <ACPI PCI bus> on pcib2
pci2: domain=0, physical bus=2
found->	vendor=0x10ec, dev=0x8168, revid=0x01
	domain=0, bus=2, slot=0, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x4010, cachelnsz=16 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=10
	powerspec 2  supports D0 D1 D2 D3  current D0
	MSI supports 2 messages, 64 bit
	map[10]: type I/O Port, range 32, base 0xd800, size  8, enabled
pcib2: requested I/O range 0xd800-0xd8ff: in range
	map[18]: type Memory, range 64, base 0xfeaff000, size 12, enabled
pcib2: requested memory range 0xfeaff000-0xfeafffff: good
pcib2: matched entry for 2.0.INTA
pcib2: slot 0 INTA hardwired to IRQ 19
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 19 at device 0.0 on pci2
re0: MSI count : 2
re0: MSI-X count : 0
re0: attempting to allocate 1 MSI vectors (2 supported)
msi: routing MSI IRQ 256 to local APIC 0 vector 49
re0: using IRQ 256 for MSI
re0: Using 1 MSI message
re0: Chip rev. 0x38000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: OUI 0x00e04c, model 0x0011, rev. 2
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: bpf attached
re0: Ethernet address: 00:19:db:63:76:3e
ahci0: <ATI IXP600 AHCI SATA controller> port 0xb000-0xb007,0xa000-0xa003,0x9000-0x9007,0x8000-0x8003,0x7000-0x700f mem 0xfe7ff800-0xfe7ffbff irq 22 at device 18.0 on pci0
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 50
ahci0: AHCI v1.10 with 4 3Gbps ports, Port Multiplier supported
ahci0: Caps: 64bit NCQ SNTF MPS AL CLO 3Gbps PM PMD 32cmd CCC 4ports
ahci0: Caps2:
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: Caps: HPCP
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: Caps: HPCP
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich2: Caps: HPCP
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich3: Caps: HPCP
ohci0: <OHCI (generic) USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 19.0 on pci0
ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51
usbus0: <OHCI (generic) USB controller> on ohci0
usbus0: bpf attached
ohci0: usbpf: Attached
ohci1: <OHCI (generic) USB controller> mem 0xfe7fd000-0xfe7fdfff irq 17 at device 19.1 on pci0
ioapic0: routing intpin 17 (PCI IRQ 17) to lapic 0 vector 52
usbus1: <OHCI (generic) USB controller> on ohci1
usbus1: bpf attached
ohci1: usbpf: Attached
ohci2: <OHCI (generic) USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.2 on pci0
ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
usbus2: <OHCI (generic) USB controller> on ohci2
usbus2: bpf attached
ohci2: usbpf: Attached
ohci3: <OHCI (generic) USB controller> mem 0xfe7fb000-0xfe7fbfff irq 17 at device 19.3 on pci0
usbus3: <OHCI (generic) USB controller> on ohci3
usbus3: bpf attached
ohci3: usbpf: Attached
ohci4: <OHCI (generic) USB controller> mem 0xfe7fa000-0xfe7fafff irq 18 at device 19.4 on pci0
usbus4: <OHCI (generic) USB controller> on ohci4
usbus4: bpf attached
ohci4: usbpf: Attached
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe7ff000-0xfe7ff0ff irq 19 at device 19.5 on pci0
ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 54
ehci0: AMD SB600/700 quirk applied
ehci0: Dropped interrupts workaround enabled
usbus5: EHCI version 1.0
usbus5: <EHCI (generic) USB 2.0 controller> on ehci0
usbus5: bpf attached
ehci0: usbpf: Attached
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 55
pci0: <multimedia, HDA> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib3:   domain            0
pcib3:   secondary bus     3
pcib3:   subordinate bus   3
pcib3:   I/O decode        0xe000-0xefff
pcib3:   memory decode     0xfeb00000-0xfebfffff
pcib3:   no prefetched decode
pcib3:   Subtractively decoded bridge.
pci3: <ACPI PCI bus> on pcib3
pci3: domain=0, physical bus=3
found->	vendor=0x1106, dev=0x3044, revid=0xc0
	domain=0, bus=3, slot=0, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0117, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=4
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type Memory, range 32, base 0xfebff800, size 11, enabled
pcib3: requested memory range 0xfebff800-0xfebfffff: good
	map[14]: type I/O Port, range 32, base 0xe800, size  7, enabled
pcib3: requested I/O range 0xe800-0xe87f: in range
pcib3: matched entry for 3.0.INTA
pcib3: slot 0 INTA hardwired to IRQ 20
pci3: <serial bus, FireWire> at device 0.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 56
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 57
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 58
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
acpi0: wakeup code va 0xffffff8087fae000 pa 0x4000
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
atrtc: atrtc0 already exists; skipping it
attimer: attimer0 already exists; skipping it
sc: sc0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xcd800-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
ppc0 failed to probe at irq 7 on isa0
uart0 failed to probe at port 0x3f8 irq 4 on isa0
uart1 failed to probe at port 0x2f8 irq 3 on isa0
isa_probe_children: probing PnP devices
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: CLK_VAL field overlaps THT_EN bit
device_attach: acpi_throttle0 attach returned 6
powernow0: <PowerNow! K8> on cpu0
powernow0: STATUS: 0x310a120c0a0e020e
powernow0: STATUS: maxfid: 0x0e
powernow0: STATUS: maxvid: 0x0a
device_attach: powernow0 attach returned 6
powernow1: <PowerNow! K8> on cpu1
powernow1: STATUS: 0x310a120c0a0e020e
powernow1: STATUS: maxfid: 0x0e
powernow1: STATUS: maxvid: 0x0a
device_attach: powernow1 attach returned 6
Device configuration finished.
procfs registered
lapic: Divisor 2, Frequency 99761963 Hz
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
lo0: bpf attached
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ahcich0: AHCI reset...
ahcich0: SATA connect time=100us status=00000123
ahcich0: AHCI reset: device found
ahcich1: AHCI reset...
ahcich1: SATA connect time=100us status=00000123
ahcich1: AHCI reset: device found
ahcich2: AHCI reset...
ahcich2: SATA connect time=100us status=00000123
ahcich2: AHCI reset: device found
ahcich3: AHCI reset...
ahcich3: SATA connect time=100us status=00000123
ahcich3: AHCI reset: device found
ugen0.1: <ATI> at usbus0
uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <ATI> at usbus1
uhub1: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ata0: reset tp1 mask=03 ostat0=50 ostat1=50
ahcich0: AHCI reset: device ready after 100ms
Expensive timeout(9) function: 0xffffffff802db3d0(0xfffffe00015abb00) 0.054211359 s
(aprobe0:ahcich0:0:15:0): Command timed out
(aprobe0:ahcich0:0:15:0): Error 5, Retries exhausted
(aprobe0:ahcich0:0:0:0): SIGNATURE: 0000
ahcich1: AHCI reset: device ready after 100ms
(aprobe1:ahcich1:0:15:0): Command timed out
(aprobe1:ahcich1:0:15:0): Error 5, Retries exhausted
(aprobe0:ahcich1:0:0:0): SIGNATURE: 0000
ahcich2: AHCI reset: device ready after 100ms
(aprobe2:ahcich2:0:15:0): Command timed out
(aprobe2:ahcich2:0:15:0): Error 5, Retries exhausted
(aprobe0:ahcich2:0:0:0): SIGNATURE: 0000
ahcich3: AHCI reset: device ready after 100ms
(aprobe3:ahcich3:0:15:0): Command timed out
(aprobe3:ahcich3:0:15:0): Error 5, Retries exhausted
(aprobe0:ahcich3:0:0:0): SIGNATURE: 0000
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: reset tp2 stat0=00 stat1=00 devices=0x30000
(aprobe1:ata0:0:0:0): SIGNATURE: eb14
(aprobe0:ata0:0:1:0): SIGNATURE: eb14
pass0 at ahcich0 bus 0 scbus0 target 0 lun 0
pass0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
pass0: Serial Number 6QF0W6RN
GEOM: new disk cd0
GEOM: new disk cd1
pass0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass0: Command Queueing enabled
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
cd0 at ata0 bus 0 scbus4 target 0 lun 0
cd0: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device 
cd0: Serial Number 2005082900
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
pass1 at ahcich1 bus 0 scbus1 target 0 lun 0
pass1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
pass1: Serial Number W24044SM
pass1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass1: Command Queueing enabled
pass2 at ahcich2 bus 0 scbus2 target 0 lun 0
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
(cd1:ata0:0:1:0): Error 6, Unretryable error
cd1 at ata0 bus 0 scbus4 target 1 lun 0
cd1: <ATAPI DVD D  DH16D2P HP55> Removable CD-ROM SCSI-0 device 
cd1: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed
pass2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
pass2: Serial Number 6QF0ZTQM
pass2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass2: Command Queueing enabled
pass3 at ahcich3 bus 0 scbus3 target 0 lun 0
pass3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
pass3: Serial Number W240643V
pass3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
pass3: Command Queueing enabled
pass4 at ata0 bus 0 scbus4 target 0 lun 0
pass4: <LITE-ON CD-RW SOHR-5239V 2$0A> Removable CD-ROM SCSI-0 device 
pass4: Serial Number 2005082900
pass4: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
pass5 at ata0 bus 0 scbus4 target 1 lun 0
pass5: <ATAPI DVD D  DH16D2P HP55> Removable CD-ROM SCSI-0 device 
pass5: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
ada0: Serial Number 6QF0W6RN
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
ada1: Serial Number W24044SM
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <ST3320620AS 3.AAK> ATA-7 SATA 2.x device
ada2: Serial Number 6QF0ZTQM
ada2: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 305245MB (625142448 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <ST2000DM001-9YN164 CC46> ATA-8 SATA 3.x device
(cd0:ata0:0:0:0): SCSI status error
(cd0:ata0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd0:ata0:0:0:0): CAM status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI status: Check Condition
(cd0:ata0:0:0:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
(cd0:ata0:0:0:0): Error 6, Unretryable error
ada3: Serial Number W240643V
ada3: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
SMP: AP CPU #1 Launched!
cpu1 AP:
     ID: 0x01000000   VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
  timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
TSC timecounter discards lower 8 bit(s)
Timecounter "TSC-low" frequency 8573416 Hz quality -100
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
(cd1:ata0:0:1:0): Error 6, Unretryable error
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
(cd1:ata0:0:1:0): Error 6, Unretryable error
(cd1:ata0:0:1:0): SCSI status error
(cd1:ata0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 
(cd1:ata0:0:1:0): CAM status: SCSI Status Error
(cd1:ata0:0:1:0): SCSI status: Check Condition
(cd1:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present - tray closed)
(cd1:ata0:0:1:0): Error 6, Unretryable error
GEOM: new disk ada0
GEOM: new disk ada1
GEOM: new disk ada2
GEOM: new disk ada3
GEOM: ada2s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ada2s1: media size does not match label.
Root mount waiting for: usbus5
Root mount waiting for: usbus5
Root mount waiting for: usbus5
uhub5: 10 ports with 10 removable, self powered
Root mount waiting for: usbus5
Trying to mount root from ufs:/dev/ada0p2 [rw]...
start_init: trying /sbin/init
ugen1.2: <vendor 0x2222> at usbus1
ums0: <vendor 0x2222 Evoluent Vertical Mouse 2, class 0/0, rev 1.10/51.26, addr 2> on usbus1
ums0: 5 buttons and [XYZ] coordinates ID=0
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
* csup
--------------------------------------------------------------
>Release-Note:
>Audit-Trail:
>Unformatted:
 >>> Running /usr/bin/csup
 --------------------------------------------------------------
 Parsing supfile "/root/csup/date-supfile"
 Connecting to cvsup.uk.freebsd.org
 Cannot connect to 2001:630:212:8:20e:cff:fe09:a69c: Protocol not supported
 Connected to 131.111.8.41
 Server software version: SNAP_16_1h
 MD5 authentication started
 MD5 authentication successful
 Negotiating file attribute support
 Exchanging collection information
 Establishing multiplexed-mode data connection
 Running
 Updating collection src-all/cvs
  Edit src/sys/dev/acpica/acpi.c
   Add delta 1.305.2.4 2012.02.23.22.26.14 jkim
  Edit src/sys/dev/acpica/acpi_ec.c
   Add delta 1.95.2.2 2012.02.23.22.26.14 jkim
  Edit src/sys/dev/acpica/acpi_hpet.c
   Add delta 1.38.2.2 2012.02.23.22.26.14 jkim
  Edit src/sys/dev/acpica/acpi_timer.c
   Add delta 1.50.2.3 2012.02.23.22.26.14 jkim
  Edit src/sys/dev/acpica/acpivar.h
   Add delta 1.125.2.4 2012.02.23.22.26.14 jkim
 Shutting down connection to server
 Finished successfully
 * supfil
 *default host=cvsup.uk.freebsd.org
 *default base=/var/db
 *default prefix=/usr
 *default release=cvs tag=RELENG_9
 
 # ok:
 # *default date=2012.02.23.22.26.00
 # fail:
 *default date=2012.02.23.22.26.30
 
 *default delete use-rel-suffix
 *default compress
 src-all
 * pciconf -lvb
 hostb0 at pci0:0:0:0:	class=0x060000 card=0x79101002 chip=0x79101002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'RS690 Host Bridge'
     class      = bridge
     subclass   = HOST-PCI
 pcib1 at pci0:0:1:0:	class=0x060400 card=0x79121002 chip=0x79121002 rev=0x00 hdr=0x01
     vendor     = 'ATI Technologies Inc'
     device     = 'RS690 PCI to PCI Bridge (Internal gfx)'
     class      = bridge
     subclass   = PCI-PCI
 pcib2 at pci0:0:7:0:	class=0x060400 card=0x79101002 chip=0x79171002 rev=0x00 hdr=0x01
     vendor     = 'ATI Technologies Inc'
     device     = 'RS690 PCI to PCI Bridge (PCI Express Port 3)'
     class      = bridge
     subclass   = PCI-PCI
 ahci0 at pci0:0:18:0:	class=0x010601 card=0x73291462 chip=0x43801002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SB600 Non-Raid-5 SATA'
     class      = mass storage
     subclass   = SATA
     bar   [10] = type I/O Port, range 32, base 0xb000, size  8, enabled
     bar   [14] = type I/O Port, range 32, base 0xa000, size  4, enabled
     bar   [18] = type I/O Port, range 32, base 0x9000, size  8, enabled
     bar   [1c] = type I/O Port, range 32, base 0x8000, size  4, enabled
     bar   [20] = type I/O Port, range 32, base 0x7000, size 16, enabled
     bar   [24] = type Memory, range 32, base 0xfe7ff800, size 1024, enabled
 ohci0 at pci0:0:19:0:	class=0x0c0310 card=0x73271462 chip=0x43871002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SB600 USB (OHCI0)'
     class      = serial bus
     subclass   = USB
     bar   [10] = type Memory, range 32, base 0xfe7fe000, size 4096, enabled
 ohci1 at pci0:0:19:1:	class=0x0c0310 card=0x73271462 chip=0x43881002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SB600 USB (OHCI1)'
     class      = serial bus
     subclass   = USB
     bar   [10] = type Memory, range 32, base 0xfe7fd000, size 4096, enabled
 ohci2 at pci0:0:19:2:	class=0x0c0310 card=0x73271462 chip=0x43891002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SB600 USB (OHCI2)'
     class      = serial bus
     subclass   = USB
     bar   [10] = type Memory, range 32, base 0xfe7fc000, size 4096, enabled
 ohci3 at pci0:0:19:3:	class=0x0c0310 card=0x73271462 chip=0x438a1002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SB600 USB (OHCI3)'
     class      = serial bus
     subclass   = USB
     bar   [10] = type Memory, range 32, base 0xfe7fb000, size 4096, enabled
 ohci4 at pci0:0:19:4:	class=0x0c0310 card=0x73271462 chip=0x438b1002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SB600 USB (OHCI4)'
     class      = serial bus
     subclass   = USB
     bar   [10] = type Memory, range 32, base 0xfe7fa000, size 4096, enabled
 ehci0 at pci0:0:19:5:	class=0x0c0320 card=0x73271462 chip=0x43861002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SB600 USB Controller (EHCI)'
     class      = serial bus
     subclass   = USB
     bar   [10] = type Memory, range 32, base 0xfe7ff000, size 256, enabled
 none0 at pci0:0:20:0:	class=0x0c0500 card=0x73271462 chip=0x43851002 rev=0x13 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SBx00 SMBus Controller'
     class      = serial bus
     subclass   = SMBus
     bar   [10] = type I/O Port, range 32, base 0xb00, size 16, enabled
     bar   [14] = type Memory, range 32, base 0xfed00000, size 1024, enabled
 atapci0 at pci0:0:20:1:	class=0x01018a card=0x73271462 chip=0x438c1002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SB600 IDE'
     class      = mass storage
     subclass   = ATA
     bar   [20] = type I/O Port, range 32, base 0xff00, size 16, enabled
 none1 at pci0:0:20:2:	class=0x040300 card=0x73271462 chip=0x43831002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SBx00 Azalia (Intel HDA)'
     class      = multimedia
     subclass   = HDA
     bar   [10] = type Memory, range 64, base 0xfe7f4000, size 16384, enabled
 isab0 at pci0:0:20:3:	class=0x060100 card=0x73271462 chip=0x438d1002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'SB600 PCI to LPC Bridge'
     class      = bridge
     subclass   = PCI-ISA
 pcib3 at pci0:0:20:4:	class=0x060401 card=0x00000000 chip=0x43841002 rev=0x00 hdr=0x01
     vendor     = 'ATI Technologies Inc'
     device     = 'SBx00 PCI to PCI Bridge'
     class      = bridge
     subclass   = PCI-PCI
 hostb1 at pci0:0:24:0:	class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
     vendor     = 'Advanced Micro Devices [AMD]'
     device     = 'K8 [Athlon64/Opteron] HyperTransport Technology Configuration'
     class      = bridge
     subclass   = HOST-PCI
 hostb2 at pci0:0:24:1:	class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
     vendor     = 'Advanced Micro Devices [AMD]'
     device     = 'K8 [Athlon64/Opteron] Address Map'
     class      = bridge
     subclass   = HOST-PCI
 hostb3 at pci0:0:24:2:	class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
     vendor     = 'Advanced Micro Devices [AMD]'
     device     = 'K8 [Athlon64/Opteron] DRAM Controller'
     class      = bridge
     subclass   = HOST-PCI
 hostb4 at pci0:0:24:3:	class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
     vendor     = 'Advanced Micro Devices [AMD]'
     device     = 'K8 [Athlon64/Opteron] Miscellaneous Control'
     class      = bridge
     subclass   = HOST-PCI
 vgapci0 at pci0:1:5:0:	class=0x030000 card=0x73271462 chip=0x791e1002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'RS690 [Radeon X1200 Series]'
     class      = display
     subclass   = VGA
     bar   [10] = type Prefetchable Memory, range 64, base 0xf0000000, size 134217728, enabled
     bar   [18] = type Memory, range 64, base 0xfe9f0000, size 65536, enabled
     bar   [20] = type I/O Port, range 32, base 0xc000, size 256, enabled
     bar   [24] = type Memory, range 32, base 0xfe800000, size 1048576, enabled
 none2 at pci0:1:5:2:	class=0x040300 card=0x79191002 chip=0x79191002 rev=0x00 hdr=0x00
     vendor     = 'ATI Technologies Inc'
     device     = 'Radeon X1200 Series Audio Controller'
     class      = multimedia
     subclass   = HDA
     bar   [10] = type Memory, range 64, base 0xfe9e8000, size 16384, enabled
 re0 at pci0:2:0:0:	class=0x020000 card=0x327c1462 chip=0x816810ec rev=0x01 hdr=0x00
     vendor     = 'Realtek Semiconductor Co., Ltd.'
     device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
     class      = network
     subclass   = ethernet
     bar   [10] = type I/O Port, range 32, base 0xd800, size 256, enabled
     bar   [18] = type Memory, range 64, base 0xfeaff000, size 4096, enabled
 none3 at pci0:3:0:0:	class=0x0c0010 card=0x086c0574 chip=0x30441106 rev=0xc0 hdr=0x00
     vendor     = 'VIA Technologies, Inc.'
     device     = 'VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller'
     class      = serial bus
     subclass   = FireWire
     bar   [10] = type Memory, range 32, base 0xfebff800, size 2048, enabled
     bar   [14] = type I/O Port, range 32, base 0xe800, size 128, enabled
 
 


More information about the freebsd-amd64 mailing list