kernel: deget(): pcbmap returned 6
Roy Stuivenberg
roycs at upcmail.nl
Mon Nov 21 07:14:39 UTC 2011
Hello,
I'm running FreeBSD 8.2 stable amd64
uname -a :
FreeBSD shadenet.roycs.nl 8.2-STABLE FreeBSD 8.2-STABLE #0: Thu Nov 17
16:54:43 CET 2011
dhondub at shadenet.roycs.nl:/usr/obj/usr/src/sys/GENERIC-ROYCS amd64
I found this error msg in tail -f /var/log/messages
kernel: deget(): pcbmap returned 6
dmesg :
root at shadenet dhondub # dmesg
Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-STABLE #0: Thu Nov 17 16:54:43 CET 2011
dhondub at shadenet.roycs.nl:/usr/obj/usr/src/sys/GENERIC-ROYCS amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz (2331.01-MHz
K8-class CPU)
Origin = "GenuineIntel" Id = 0x10677 Family = 6 Model = 17
Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x8e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant
real memory = 2147483648 (2048 MB)
avail memory = 2034466816 (1940 MB)
ACPI APIC Table: <A_M_I_ OEMAPIC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <A_M_I_ OEMXSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7ff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI Warning: Incorrect checksum in table [OEMB] - 0x1D, should be 0x14
(20101013/tbutils-354)
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfc000000-0xfcffffff irq 16
at device 0.0 on pci1
nvidia0: <GeForce 6200 LE> on vgapci0
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
uhci0: <Intel 82801JI (ICH10) USB controller USB-D> port 0xb800-0xb81f
irq 16 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801JI (ICH10) USB controller USB-D> on uhci0
uhci1: <Intel 82801JI (ICH10) USB controller USB-E> port 0xb880-0xb89f
irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801JI (ICH10) USB controller USB-E> on uhci1
uhci2: <Intel 82801JI (ICH10) USB controller USB-F> port 0xbc00-0xbc1f
irq 18 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801JI (ICH10) USB controller USB-F> on uhci2
ehci0: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> mem
0xfbfffc00-0xfbffffff irq 18 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801JI (ICH10) USB 2.0 controller USB-B> on ehci0
hdac0: <Intel 82801JI High Definition Audio Controller> mem
0xfbff8000-0xfbffbfff irq 22 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pci4: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
atapci0: <Marvell 88SX6101 UDMA133 controller> port
0xdc00-0xdc07,0xd880-0xd883,0xd800-0xd807,0xd480-0xd483,0xd400-0xd40f
mem 0xfeaffc00-0xfeaffdff irq 16 at device 0.0 on pci3
atapci0: [ITHREAD]
ata2: <ATA channel 0> on atapci0
ata2: [ITHREAD]
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.5 on pci0
pci2: <ACPI PCI bus> on pcib4
ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0xcc00-0xcc7f
mem 0xfe9c0000-0xfe9fffff irq 17 at device 0.0 on pci2
ale0: 960 Tx FIFO, 1024 Rx FIFO
ale0: Using 1 MSI messages.
miibus0: <MII bus> on ale0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto
ale0: Ethernet address: 00:24:8c:02:ea:83
ale0: [FILTER]
uhci3: <Intel 82801JI (ICH10) USB controller USB-A> port 0xb080-0xb09f
irq 23 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801JI (ICH10) USB controller USB-A> on uhci3
uhci4: <Intel 82801JI (ICH10) USB controller USB-B> port 0xb400-0xb41f
irq 19 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801JI (ICH10) USB controller USB-B> on uhci4
uhci5: <Intel 82801JI (ICH10) USB controller USB-C> port 0xb480-0xb49f
irq 18 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801JI (ICH10) USB controller USB-C> on uhci5
ehci1: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> mem
0xfbfff800-0xfbfffbff irq 23 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801JI (ICH10) USB 2.0 controller USB-A> on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem
0xfebffc00-0xfebffcff irq 16 at device 0.0 on pci5
miibus1: <MII bus> on rl0
rlphy0: <RealTek internal media interface> PHY 0 on miibus1
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:10:a7:07:ca:98
rl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH10 SATA300 controller> port
0xa000-0xa007,0x9c00-0x9c03,0x9880-0x9887,0x9800-0x9803,0x9480-0x948f,0x9400-0x940f irq 19 at device 31.2 on pci0
atapci1: [ITHREAD]
ata3: <ATA channel 0> on atapci1
ata3: [ITHREAD]
ata4: <ATA channel 1> on atapci1
ata4: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci2: <Intel ICH10 SATA300 controller> port
0xb000-0xb007,0xac00-0xac03,0xa880-0xa887,0xa800-0xa803,0xa480-0xa48f,0xa400-0xa40f irq 19 at device 31.5 on pci0
atapci2: [ITHREAD]
ata5: <ATA channel 0> on atapci2
ata5: [ITHREAD]
ata6: <ATA channel 1> on atapci2
ata6: [ITHREAD]
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2
on acpi0
fdc0: [FILTER]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
forwarding disabled, default to deny, logging disabled
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
acd0: DVDR <ASUS DRW-1608P3S/1.19> at ata2-slave UDMA66
ad6: 953869MB <SAMSUNG HD103UJ 1AA01118> at ata3-master UDMA100 SATA
3Gb/s
ad8: 238475MB <WDC WD2500AAJS-22RYA0 12.01B01> at ata4-master UDMA100
SATA 3Gb/s
hdac0: HDA Codec #0: Realtek ALC888
pcm0: <HDA Realtek ALC888 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC888 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA Realtek ALC888 PCM #2 Digital> at cad 0 nid 1 on hdac0
pcm3: <HDA Realtek ALC888 PCM #3 Digital> at cad 0 nid 1 on hdac0
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
GEOM: ad6s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad8s1: geometry does not match label (255h,63s != 16h,63s).
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
Root mount waiting for: usbus7
ugen4.2: <B16b02> at usbus4
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x48 0x00
0x01
ums0: <B16b02 USB-PS2 Optical Mouse, class 0/0, rev 2.00/98.02, addr 2>
on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
(probe0:ata2:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata2:0:1:0): CAM status: SCSI Status Error
(probe0:ata2:0:1:0): SCSI status: Check Condition
(probe0:ata2:0:1:0): SCSI sense: NOT READY asc:3a,0 (Medium not present)
cd0 at ata2 bus 0 scbus0 target 1 lun 0
cd0: <ASUS DRW-1608P3S 1.19> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ugen5.2: <ALCOR> at usbus5
uhub8: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on
usbus5
uhub8: 4 ports with 4 removable, self powered
ugen7.2: <LaCie> at usbus7
umass0: <201010261648> on usbus7
umass0: SCSI over Bulk-Only; quirks = 0x4100
umass0:3:0:-1: Attached to scbus3
Trying to mount root from ufs:/dev/ad6s1a
ale0: link state changed to UP
(da0:umass-sim0:0:0:0): got CAM status 0x4
(da0:umass-sim0:0:0:0): fatal error, failed to attach to device
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
pid 93480 (gnome-mplayer), uid 1000: exited on signal 11 (core dumped)
pid 93483 (gnome-mplayer), uid 1000: exited on signal 11 (core dumped)
pid 93488 (gnome-mplayer), uid 1000: exited on signal 11 (core dumped)
pid 93493 (gnome-mplayer), uid 1000: exited on signal 11 (core dumped)
ugen7.3: <Apple Inc.> at usbus7
umass1: <Apple Inc. iPod, class 0/0, rev 2.00/0.01, addr 3> on usbus7
umass1: SCSI over Bulk-Only; quirks = 0x0100
umass1:4:1:-1: Attached to scbus4
da0 at umass-sim1 bus 1 scbus4 target 0 lun 0
da0: <Apple iPod 1.62> Removable Direct Access SCSI-0 device
da0: 40.000MB/s transfers
da0: 7583MB (1941441 4096 byte sectors: 255H 63S/T 120C)
GEOM: da0: partition 1 does not end on a track boundary.
ugen5.3: <Corsair> at usbus5
umass2: <Corsair UFD, class 0/0, rev 2.00/11.00, addr 3> on usbus5
umass2: SCSI over Bulk-Only; quirks = 0x0100
umass2:5:2:-1: Attached to scbus5
da1 at umass-sim2 bus 2 scbus5 target 0 lun 0
da1: <Corsair UFD 1100> Removable Direct Access SCSI-0 device
da1: 1.000MB/s transfers
da1: 15680MB (32112640 512 byte sectors: 255H 63S/T 1998C)
ugen7.4: <LaCie> at usbus7
umass3: <LaCie LaCie iamaKey, class 0/0, rev 2.00/1.00, addr 4> on
usbus7
umass3: SCSI over Bulk-Only; quirks = 0x0100
umass3:6:3:-1: Attached to scbus6
da2 at umass-sim3 bus 3 scbus6 target 0 lun 0
da2: <LaCie iamaKey 0.00> Removable Direct Access SCSI-2 device
da2: 40.000MB/s transfers
da2: 3856MB (7897088 512 byte sectors: 255H 63S/T 491C)
GEOM: da2: partition 1 does not start on a track boundary.
GEOM: da2: partition 1 does not end on a track boundary.
GEOM: iso9660/Debian 6.0.3 amd64 1: partition 1 does not start on a
track boundary.
GEOM: iso9660/Debian 6.0.3 amd64 1: partition 1 does not end on a track
boundary.
ugen5.4: <Kingston> at usbus5
umass4: <Kingston DataTraveler 2.0, class 0/0, rev 2.00/1.00, addr 4> on
usbus5
umass4: SCSI over Bulk-Only; quirks = 0x4100
umass4:7:4:-1: Attached to scbus7
da3 at umass-sim4 bus 4 scbus7 target 0 lun 0
da3: <Kingston DataTraveler 2.0 PMAP> Removable Direct Access SCSI-0
device
da3: 1.000MB/s transfers
da3: 3824MB (7831552 512 byte sectors: 255H 63S/T 487C)
GEOM: da3: partition 1 does not start on a track boundary.
GEOM: da3: partition 1 does not end on a track boundary.
GEOM: iso9660/Debian 6.0.3 amd64 1: partition 1 does not start on a
track boundary.
GEOM: iso9660/Debian 6.0.3 amd64 1: partition 1 does not end on a track
boundary.
GEOM: iso9660/Debian 6.0.3 amd64 1: partition 1 does not start on a
track boundary.
GEOM: iso9660/Debian 6.0.3 amd64 1: partition 1 does not end on a track
boundary.
GEOM: iso9660/Debian 6.0.3 amd64 1: partition 1 does not start on a
track boundary.
GEOM: iso9660/Debian 6.0.3 amd64 1: partition 1 does not end on a track
boundary.
ugen7.2: <LaCie> at usbus7 (disconnected)
umass0: at uhub7, port 5, addr 2 (disconnected)
GEOM: ad8s1: geometry does not match label (255h,63s != 16h,63s).
ugen7.3: <Apple Inc.> at usbus7 (disconnected)
umass1: at uhub7, port 4, addr 3 (disconnected)
(da0:umass-sim1:1:0:0): lost device
(da0:umass-sim1:1:0:0): Synchronize cache failed, status == 0xa, scsi
status == 0x0
(da0:umass-sim1:1:0:0): removing device entry
Device da0s1 went missing before all of the data could be written to it;
expect data loss.
ugen5.4: <Kingston> at usbus5 (disconnected)
umass4: at uhub8, port 3, addr 4 (disconnected)
(da3:umass-sim4:4:0:0): lost device
(da3:umass-sim4:4:0:0): removing device entry
ugen5.3: <Corsair> at usbus5 (disconnected)
umass2: at uhub8, port 2, addr 3 (disconnected)
(da1:umass-sim2:2:0:0): lost device
(da1:umass-sim2:2:0:0): removing device entry
ugen5.3: <Corsair> at usbus5
umass0: <Corsair UFD, class 0/0, rev 2.00/11.00, addr 3> on usbus5
umass0: SCSI over Bulk-Only; quirks = 0x0100
umass0:3:0:-1: Attached to scbus3
da0 at umass-sim0 bus 0 scbus3 target 0 lun 0
da0: <Corsair UFD 1100> Removable Direct Access SCSI-0 device
da0: 1.000MB/s transfers
da0: 15680MB (32112640 512 byte sectors: 255H 63S/T 1998C)
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
deget(): pcbmap returned 6
/etc/rc.conf :
# -- sysinstall generated deltas -- # Mon Jan 3 03:29:55 2011
# Created: Mon Jan 3 03:29:55 2011
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
hostname="shadenet.roycs.nl"
defaultrouter="192.168.0.1"
ifconfig_ale0="inet 192.168.0.8 netmask 255.255.255.0"
sshd_enable="YES"
clamav_clamd_enable="YES"
font8x14="NO"
font8x16="swiss-8x16"
font8x8="swiss-8x8"
keymap="us.iso"
allscreens_flags="MODE_280"
devd_enable="YES"
dbus_enable="YES"
hald_enable="YES"
gnome_enable="YES"
polkitd_enable="YES"
fusefs_enable="YES"
linux_enable="YES"
/boot/loader.conf :
hw.ata.atapi_dma="1"
loader_logo="beastie"
kern.maxdsiz="734003200"
kern.maxfiles="16464"
kern.maxusers="256"
kern.ipc.shmmax=67108864
kern.ipc.shmall=32768
nvidia_load="YES"
msdosfs_load="YES"
No smart answers searching google.
Any help appreciated ;)
Regards,
Roy.
--
, ,
/( )`
\ \___ / |
/- _ `-/ '
(/\/ \ \ /\
/ / | ` \
O O ) / |
`-^--'`< '
(_.) _ ) /
`.___/` /
`-----' /
<----. __ / __ \
<----|====O)))==) \) /====
<----' `--' `.__,' \
| |
\ /
______( (_ / \______
,' ,-----' | \
`--{__________) \/ "Berkeley Unix Daemon"
More information about the freebsd-amd64
mailing list