Semi-working patch for amd64 suspend/resume
Alex Keda
admin at lissyara.su
Tue Dec 16 08:55:23 PST 2008
Andrey V. Elsukov пишет:
> Nate Lawson wrote:
>>> #7 0xffffffff80551631 in device_attach (dev=0xffffff000772fb00) at
>>> bus_if.h:46
>>> #8 0xffffffff805529ea in bus_generic_attach (dev=Variable "dev" is not
>>> available.
>>> ) at /usr/src/sys/kern/subr_bus.c:2953
>>> #9 0xffffffff8024c2f7 in ata_identify (dev=0xffffff0001559a00) at
>>> /usr/src/sys/dev/ata/ata-all.c:713
>>> #10 0xffffffff80254d22 in ata_sata_phy_event (context=Variable "context"
>>> is not available.
>>> ) at /usr/src/sys/dev/ata/ata-sata.c:69
>>> #11 0xffffffff8056155a in taskqueue_run (queue=0xffffff0001499780) at
>>> /usr/src/sys/kern/subr_taskqueue.c:282
>>> #12 0xffffffff80561802 in taskqueue_thread_loop (arg=Variable "arg" is
>>> not available.
>>
>> ATA should be disabling its SATA PHY task during suspend, then
>> re-enabling it after resume. Looks like it doesn't do this.
>
> It seems that resuming of ATA controller is already done.
> AHCI interrupts are enabled and PHY state was changed.
> And task are doing attach of hot-plugged device..
> So, Alex, can you show output of a kgdb command:
> (kgdb) p "%s", msgbufp->msg_ptr
>
boot verbose, as requested
-------------- next part --------------
Script started on Tue Dec 16 19:49:33 2008
HP# kgdb -q /boot/kernel/kernel vmcore.9[K11
Reading symbols from /boot/kernel/sound.ko...Reading symbols from /boot/kernel/sound.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/sound.ko
Reading symbols from /boot/kernel/snd_hda.ko...Reading symbols from /boot/kernel/snd_hda.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/snd_hda.ko
Reading symbols from /boot/kernel/umodem.ko...Reading symbols from /boot/kernel/umodem.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/umodem.ko
Reading symbols from /boot/kernel/acpi_video.ko...Reading symbols from /boot/kernel/acpi_video.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/acpi_video.ko
Reading symbols from /boot/kernel/atapicam.ko...Reading symbols from /boot/kernel/atapicam.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/atapicam.ko
Reading symbols from /boot/kernel/acpi_aiboost.ko...Reading symbols from /boot/kernel/acpi_aiboost.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/acpi_aiboost.ko
Reading symbols from /boot/kernel/acpi_dock.ko...Reading symbols from /boot/kernel/acpi_dock.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/acpi_dock.ko
Reading symbols from /boot/kernel/ng_bt3c.ko...Reading symbols from /boot/kernel/ng_bt3c.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/ng_bt3c.ko
Reading symbols from /boot/kernel/netgraph.ko...Reading symbols from /boot/kernel/netgraph.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/netgraph.ko
Reading symbols from /boot/kernel/ng_btsocket.ko...Reading symbols from /boot/kernel/ng_btsocket.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/ng_btsocket.ko
Reading symbols from /boot/kernel/ng_bluetooth.ko...Reading symbols from /boot/kernel/ng_bluetooth.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/ng_bluetooth.ko
Reading symbols from /boot/kernel/ng_ubt.ko...Reading symbols from /boot/kernel/ng_ubt.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/ng_ubt.ko
Reading symbols from /boot/kernel/ubtbcmfw.ko...Reading symbols from /boot/kernel/ubtbcmfw.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/ubtbcmfw.ko
Reading symbols from /boot/kernel/ng_l2cap.ko...Reading symbols from /boot/kernel/ng_l2cap.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/ng_l2cap.ko
Reading symbols from /boot/kernel/iicbb.ko...Reading symbols from /boot/kernel/iicbb.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/iicbb.ko
Reading symbols from /boot/kernel/iicbus.ko...Reading symbols from /boot/kernel/iicbus.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/iicbus.ko
Reading symbols from /boot/kernel/tmpfs.ko...Reading symbols from /boot/kernel/tmpfs.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/tmpfs.ko
Reading symbols from /usr/local/modules/rtc.ko...done.
Loaded symbols for /usr/local/modules/rtc.ko
Reading symbols from /boot/kernel/linux.ko...Reading symbols from /boot/kernel/linux.ko.symbols...done.
done.
Loaded symbols for /boot/kernel/linux.ko
#0 doadump () at pcpu.h:196
196 pcpu.h: No such file or directory.
in pcpu.h
(kgdb) bt
#0 doadump () at pcpu.h:196
#1 0xffffffff80528008 in boot (howto=260) at /usr/src/sys/kern/kern_shutdown.c:420
#2 0xffffffff8052844c in panic (fmt=0xffffffff808a4cbc "%s") at /usr/src/sys/kern/kern_shutdown.c:576
#3 0xffffffff807e4ca8 in trap_fatal (frame=0xffffff0001345720, eva=Variable "eva" is not available.
) at /usr/src/sys/amd64/amd64/trap.c:759
#4 0xffffffff807e5074 in trap_pfault (frame=0xfffffffe4005ba20, usermode=0) at /usr/src/sys/amd64/amd64/trap.c:675
#5 0xffffffff807e5970 in trap (frame=0xfffffffe4005ba20) at /usr/src/sys/amd64/amd64/trap.c:444
#6 0xffffffff807c80ae in calltrap () at /usr/src/sys/amd64/amd64/exception.S:217
#7 0xffffffff80551631 in device_attach (dev=0xffffff0001afe900) at bus_if.h:46
#8 0xffffffff805529ea in bus_generic_attach (dev=Variable "dev" is not available.
) at /usr/src/sys/kern/subr_bus.c:2953
#9 0xffffffff8024c2f7 in ata_identify (dev=0xffffff0001559a00) at /usr/src/sys/dev/ata/ata-all.c:713
#10 0xffffffff80254d22 in ata_sata_phy_event (context=Variable "context" is not available.
) at /usr/src/sys/dev/ata/ata-sata.c:69
#11 0xffffffff8056155a in taskqueue_run (queue=0xffffff0001499780) at /usr/src/sys/kern/subr_taskqueue.c:282
#12 0xffffffff80561802 in taskqueue_thread_loop (arg=Variable "arg" is not available.
) at /usr/src/sys/kern/subr_taskqueue.c:403
#13 0xffffffff805069c8 in fork_exit (callout=0xffffffff80561790 <taskqueue_thread_loop>, arg=0xffffffff80b6b250, frame=0xfffffffe4005bc90)
at /usr/src/sys/kern/kern_fork.c:821
#14 0xffffffff807c84be in fork_trampoline () at /usr/src/sys/amd64/amd64/exception.S:521
#15 0x0000000000000000 in ?? ()
#16 0x0000000000000000 in ?? ()
#17 0x0000000000000000 in ?? ()
#18 0x0000000000000000 in ?? ()
#19 0x0000000000000000 in ?? ()
#20 0x0000000000000000 in ?? ()
#21 0x0000000000000000 in ?? ()
#22 0x0000000000000000 in ?? ()
#23 0x0000000000000000 in ?? ()
#24 0x0000000000000000 in ?? ()
#25 0x0000000000000000 in ?? ()
#26 0x0000000000000000 in ?? ()
#27 0x0000000000000000 in ?? ()
#28 0x0000000000000000 in ?? ()
#29 0x0000000000000000 in ?? ()
#30 0x0000000000000000 in ?? ()
#31 0x0000000000000000 in ?? ()
#32 0x0000000000000000 in ?? ()
#33 0x0000000000000000 in ?? ()
#34 0x0000000000000000 in ?? ()
#35 0x0000000000000000 in ?? ()
#36 0x0000000000000000 in ?? ()
#37 0x0000000000000000 in ?? ()
#38 0x0000000000000000 in ?? ()
#39 0x0000000000e8a000 in ?? ()
#40 0xffffff0001345720 in ?? ()
---Type <return> to continue, or q <return> to quit---
#41 0xffffffff80b50500 in tdq_cpu ()
#42 0xffffffff80b4f880 in affinity ()
#43 0xffffff0001345720 in ?? ()
#44 0xfffffffe4005b690 in ?? ()
#45 0xfffffffe4005b648 in ?? ()
#46 0xffffff0001891ab0 in ?? ()
#47 0xffffffff8054abad in sched_switch (td=0xffffffff80561790, newtd=0xffffffff80b6b250, flags=Variable "flags" is not available.
) at /usr/src/sys/kern/sched_ule.c:1848
Previous frame inner to this frame (corrupt stack?)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb) printf "%s", msgbufp->msg_ptr
Copyright (c) 1992-2008 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-CURRENT #0: Sat Dec 13 22:29:48 MSK 2008
lissyara at acer.lissyara.int.otradno.ru:/usr/obj/usr/src/sys/color-console
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e5f000.
Preloaded elf obj module "/boot/kernel/sound.ko" at 0xffffffff80e5f1f8.
Preloaded elf obj module "/boot/kernel/snd_hda.ko" at 0xffffffff80e5f860.
Preloaded elf obj module "/boot/kernel/umodem.ko" at 0xffffffff80e5fe48.
Preloaded elf obj module "/boot/kernel/acpi_video.ko" at 0xffffffff80e60370.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at 0xffffffff80e608e0.
Preloaded elf obj module "/boot/kernel/atapicam.ko" at 0xffffffff80e60940.
Preloaded elf obj module "/boot/kernel/acpi_aiboost.ko" at 0xffffffff80e60f30.
Preloaded elf obj module "/boot/kernel/acpi_dock.ko" at 0xffffffff80e614a0.
Preloaded elf obj module "/boot/kernel/ng_bt3c.ko" at 0xffffffff80e61a10.
Preloaded elf obj module "/boot/kernel/netgraph.ko" at 0xffffffff80e61ff8.
Preloaded elf obj module "/boot/kernel/ng_btsocket.ko" at 0xffffffff80e62668.
Preloaded elf obj module "/boot/kernel/ng_bluetooth.ko" at 0xffffffff80e62cd8.
Preloaded elf obj module "/boot/kernel/ng_ubt.ko" at 0xffffffff80e63248.
Preloaded elf obj module "/boot/kernel/ubtbcmfw.ko" at 0xffffffff80e637b0.
Preloaded elf obj module "/boot/kernel/ng_l2cap.ko" at 0xffffffff80e63ca0.
Preloaded elf obj module "/boot/kernel/iicbb.ko" at 0xffffffff80e64290.
Preloaded elf obj module "/boot/kernel/iicbus.ko" at 0xffffffff80e64738.
Preloaded elf obj module "/boot/kernel/tmpfs.ko" at 0xffffffff80e64ba0.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1994924370 Hz
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-60 (1994.92-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x60f82 Stepping = 2
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x2001<SSE3,CX16>
AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
Cores per package: 2
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
---Type <return> to continue, or q <return> to quit---
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 512 kbytes, 64 bytes/line, 1 lines/tag, 16-way associative
usable memory = 1998295040 (1905 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
0x0000000000e92000 - 0x0000000074ad3fff, 1942233088 bytes (474178 pages)
avail memory = 1929797632 (1840 MB)
ACPI APIC Table: <HP 0944 >
INTR: Adding local APIC 1 as a target
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
ULE: setup cpu 0
ULE: setup cpu 1
ACPI: RSDP @ 0x0xfe0b0/0x0024 (v 2 HP )
ACPI: XSDT @ 0x0x77fc81bc/0x0064 (v 1 HPQOEM SLIC-MPC 0x00000001 HP 0x00000001)
ACPI: FACP @ 0x0x77fc8084/0x00F4 (v 4 HP 0944 0x00000003 HP 0x00000001)
ACPI Error (tbfadt-0516): 32/64X address mismatch in "Pm2ControlBlock": [ 8800] [ 0 8100], using 64X [20070320]
ACPI: DSDT @ 0x0x77fc84a4/0x1193C (v 1 HP SB400 0x00010000 MSFT 0x03000001)
ACPI: FACS @ 0x0x77fe7d80/0x0040
ACPI: SLIC @ 0x0x77fc8220/0x0176 (v 1 HPQOEM SLIC-MPC 0x00000001 HP 0x00000001)
ACPI: EPTH @ 0x0x77fc8398/0x0038 (v 1 HP 0944 0x00000001 HP 0x00000001)
ACPI: APIC @ 0x0x77fc83d0/0x0062 (v 1 HP 0944 0x00000001 HP 0x00000001)
ACPI: MCFG @ 0x0x77fc8434/0x003C (v 1 HP 0944 0x00000001 HP 0x00000001)
ACPI: TCPA @ 0x0x77fc8470/0x0032 (v 2 HP 0944 0x00000001 HP 0x00000001)
ACPI: SSDT @ 0x0x77fd9de0/0x0059 (v 1 HP HPQNLP 0x00000001 MSFT 0x03000001)
ACPI: SSDT @ 0x0x77fd9e39/0x0206 (v 1 HP PSSTBLID 0x00000001 HP 0x00000001)
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
lapic0: Routing NMI -> LINT1
lapic0: LINT1 trigger: edge
lapic0: LINT1 polarity: high
ioapic0 <Version 2.1> irqs 0-23 on motherboard
cpu0 BSP:
---Type <return> to continue, or q <return> to quit---
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ath_rate: version 1.9 <SampleRate bit-rate selection algorithm>
wlan: <802.11 Link Layer>
snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_buffersize=16384 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
nfslock: pseudo-device
io: <I/O>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Dec 13 2008 22:26:24)
acpi0: <HPQOEM SLIC-MPC> on motherboard
PCIe: Memory Mapped configuration base @ 0xe0000000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.C08B.C08C.C08D.C154 -> bus 1 dev 5 func 0
ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.C08B.C093 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.C08B.C090 -> bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.C08B.C09F.C0B2 -> bus 0 dev 20 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.C08B.C275.C278 -> bus 0 dev 18 func 0
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xfffffffe40004000 pa 0x4000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: \_SB_.C08B.C096 -> bus 0 dev 0 func 0
unknown: I/O range not supported
acpi0: reservation of 0, 8000000 (3) failed
acpi0: reservation of 100000, fff00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 0/3 1/1 1/1 1/1 1/1 -> 9
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x62,0x66 on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
---Type <return> to continue, or q <return> to quit---
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 9
Validation 0 255 N 0 9
After Disable 0 255 N 0 9
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 10 11
Validation 0 255 N 0 10 11
After Disable 0 255 N 0 10 11
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=0, physical bus=0
found-> vendor=0x1002, dev=0x7910, revid=0x00
domain=0, bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7912, revid=0x00
domain=0, bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
---Type <return> to continue, or q <return> to quit---
cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x7914, revid=0x00
domain=0, bus=0, slot=4, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x7915, revid=0x00
domain=0, bus=0, slot=5, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x7916, revid=0x00
domain=0, bus=0, slot=6, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
powerspec 3 supports D0 D3 current D0
MSI supports 1 message
found-> vendor=0x1002, dev=0x4380, revid=0x00
domain=0, bus=0, slot=18, func=0
class=01-01-8f, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x9000, size 3, enabled
map[14]: type I/O Port, range 32, base 0x9008, size 2, enabled
map[18]: type I/O Port, range 32, base 0x9010, size 3, enabled
map[1c]: type I/O Port, range 32, base 0x5018, size 2, enabled
map[20]: type I/O Port, range 32, base 0x5020, size 4, enabled
map[24]: type Memory, range 32, base 0xd0409000, size 10, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4387, revid=0x00
domain=0, bus=0, slot=19, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
---Type <return> to continue, or q <return> to quit---
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
map[10]: type Memory, range 32, base 0xd0401000, size 12, enabled
pcib0: matched entry for 0.19.INTA
pcib0: slot 19 INTA hardwired to IRQ 23
found-> vendor=0x1002, dev=0x4388, revid=0x00
domain=0, bus=0, slot=19, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type Memory, range 32, base 0xd0402000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4389, revid=0x00
domain=0, bus=0, slot=19, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[10]: type Memory, range 32, base 0xd0403000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 17
found-> vendor=0x1002, dev=0x438a, revid=0x00
domain=0, bus=0, slot=19, func=3
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type Memory, range 32, base 0xd0404000, size 12, enabled
pcib0: matched entry for 0.19.INTB
pcib0: slot 19 INTB hardwired to IRQ 17
found-> vendor=0x1002, dev=0x438b, revid=0x00
domain=0, bus=0, slot=19, func=4
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02a0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
map[10]: type Memory, range 32, base 0xd0405000, size 12, enabled
pcib0: matched entry for 0.19.INTC
pcib0: slot 19 INTC hardwired to IRQ 17
found-> vendor=0x1002, dev=0x4386, revid=0x00
---Type <return> to continue, or q <return> to quit---
domain=0, bus=0, slot=19, func=5
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd0406000, size 8, enabled
pcib0: matched entry for 0.19.INTD
pcib0: slot 19 INTD hardwired to IRQ 23
found-> vendor=0x1002, dev=0x4385, revid=0x14
domain=0, bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type I/O Port, range 32, base 0x8200, size 4, enabled
found-> vendor=0x1002, dev=0x438c, revid=0x00
domain=0, bus=0, slot=20, func=1
class=01-01-82, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0220, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
map[20]: type I/O Port, range 32, base 0x5040, size 4, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x4383, revid=0x00
domain=0, bus=0, slot=20, func=2
class=04-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0410, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 2 supports D0 D3 current D0
map[10]: type Memory, range 64, base 0xd0408000, size 14, enabled
pcib0: matched entry for 0.20.INTA
pcib0: slot 20 INTA hardwired to IRQ 16
found-> vendor=0x1002, dev=0x438d, revid=0x00
domain=0, bus=0, slot=20, func=3
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1002, dev=0x4384, revid=0x00
domain=0, bus=0, slot=20, func=4
class=06-04-01, hdrtype=0x01, mfdev=1
---Type <return> to continue, or q <return> to quit---
cmdreg=0x0027, statreg=0x02a0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1100, revid=0x00
domain=0, bus=0, slot=24, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1101, revid=0x00
domain=0, bus=0, slot=24, func=1
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1102, revid=0x00
domain=0, bus=0, slot=24, func=2
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1022, dev=0x1103, revid=0x00
domain=0, bus=0, slot=24, func=3
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0000, statreg=0x0010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x4000-0x4fff
pcib1: memory decode 0xd0200000-0xd03fffff
pcib1: prefetched decode 0xc0000000-0xc7ffffff
pci1: <ACPI PCI bus> on pcib1
pci1: domain=0, physical bus=1
found-> vendor=0x1002, dev=0x791f, revid=0x00
domain=0, bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Prefetchable Memory, range 64, base 0xc0000000, size 27, enabled
pcib1: requested memory range 0xc0000000-0xc7ffffff: good
map[18]: type Memory, range 64, base 0xd0200000, size 16, enabled
---Type <return> to continue, or q <return> to quit---
pcib1: requested memory range 0xd0200000-0xd020ffff: good
map[20]: type I/O Port, range 32, base 0x4000, size 8, enabled
pcib1: requested I/O range 0x4000-0x40ff: in range
map[24]: type Memory, range 32, base 0xd0300000, size 20, enabled
pcib1: requested memory range 0xd0300000-0xd03fffff: good
pcib1: matched entry for 1.5.INTB
pcib1: slot 5 INTB hardwired to IRQ 19
vgapci0: <VGA-compatible display> port 0x4000-0x40ff mem 0xc0000000-0xc7ffffff,0xd0200000-0xd020ffff,0xd0300000-0xd03fffff irq 19 at device 5.0 on pci1
acpi_video0: <ACPI video extension> on vgapci0
found Internal/Integrated Digital Flat Panel(110), idx#0, port#1, detectable by BIOS, head #0
found VGA CRT or VESA Compatible Analog Monitor(100), idx#0, port#0, detectable by BIOS, head #0
found TV/HDTV or Analog-Video Monitor(200), idx#0, port#0, detectable by BIOS, head #0
found TV/HDTV or Analog-Video Monitor(210), idx#0, port#1, detectable by BIOS, head #0
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pcib2: domain 0
pcib2: secondary bus 16
pcib2: subordinate bus 16
pcib2: I/O decode 0xf000-0xfff
pcib2: memory decode 0xd0000000-0xd00fffff
pcib2: no prefetched decode
pcib2: could not get PCI interrupt routing table for \_SB_.C08B.C250 - AE_NOT_FOUND
pci16: <ACPI PCI bus> on pcib2
pci16: domain=0, physical bus=16
found-> vendor=0x14e4, dev=0x1713, revid=0x02
domain=0, bus=16, slot=0, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xd0000000, size 16, enabled
pcib2: requested memory range 0xd0000000-0xd000ffff: good
pcib0: matched entry for 0.4.INTA
pcib0: slot 4 INTA hardwired to IRQ 16
pcib2: slot 0 INTA is routed to irq 16
bge0: <Broadcom BCM5906 A2, ASIC rev. 0xc002> mem 0xd0000000-0xd000ffff irq 16 at device 0.0 on pci16
bge0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xd0000000
bge0: attempting to allocate 1 MSI vectors (1 supported)
msi: routing MSI IRQ 256 to vector 49
bge0: using IRQ 256 for MSI
miibus0: <MII bus> on bge0
---Type <return> to continue, or q <return> to quit---
brgphy0: <BCM5906 10/100baseTX PHY> PHY 1 on miibus0
brgphy0: OUI 0x000af7, model 0x0004, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bge0: bpf attached
bge0: Ethernet address: 00:1f:29:89:38:f3
bge0: [MPSAFE]
bge0: [ITHREAD]
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pcib3: domain 0
pcib3: secondary bus 32
pcib3: subordinate bus 32
pcib3: I/O decode 0x2000-0x3fff
pcib3: memory decode 0xcc000000-0xcfffffff
pcib3: no prefetched decode
pcib3: could not get PCI interrupt routing table for \_SB_.C08B.C255 - AE_NOT_FOUND
pci32: <ACPI PCI bus> on pcib3
pci32: domain=0, physical bus=32
pcib4: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pcib4: domain 0
pcib4: secondary bus 48
pcib4: subordinate bus 48
pcib4: I/O decode 0xf000-0xfff
pcib4: memory decode 0xc8000000-0xc80fffff
pcib4: no prefetched decode
pcib4: could not get PCI interrupt routing table for \_SB_.C08B.C25F - AE_NOT_FOUND
pci48: <ACPI PCI bus> on pcib4
pci48: domain=0, physical bus=48
found-> vendor=0x14e4, dev=0x4312, revid=0x02
domain=0, bus=48, slot=0, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0010, cachelnsz=16 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=10
powerspec 3 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xc8000000, size 14, enabled
pcib4: requested memory range 0xc8000000-0xc8003fff: good
pcib0: matched entry for 0.6.INTA
pcib0: slot 6 INTA hardwired to IRQ 18
pcib4: slot 0 INTA is routed to irq 18
pci48: <network> at device 0.0 (no driver attached)
atapci0: <ATI IXP600 SATA300 controller> port 0x9000-0x9007,0x9008-0x900b,0x9010-0x9017,0x5018-0x501b,0x5020-0x502f mem 0xd0409000-0xd04093ff irq 16 at devi---Type <return> to continue, or q <return> to quit---
ce 18.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x5020
atapci0: Reserved 0x400 bytes for rid 0x24 type 3 at 0xd0409000
ioapic0: routing intpin 16 (PCI IRQ 16) to vector 50
atapci0: [MPSAFE]
atapci0: [ITHREAD]
atapci0: AHCI Version 01.10 controller with 4 ports PM not supported
ata2: <ATA channel 0> on atapci0
ata2: SATA connect time=0ms
ata2: BUSY wait time=1ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=00000001
ata2: [MPSAFE]
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci0
ata3: port not implemented
ata3: [MPSAFE]
ata3: [ITHREAD]
ata4: <ATA channel 2> on atapci0
ata4: port not implemented
ata4: [MPSAFE]
ata4: [ITHREAD]
ata5: <ATA channel 3> on atapci0
ata5: port not implemented
ata5: [MPSAFE]
ata5: [ITHREAD]
ohci0: <OHCI (generic) USB controller> mem 0xd0401000-0xd0401fff irq 23 at device 19.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0401000
ioapic0: routing intpin 23 (PCI IRQ 23) to vector 51
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xd0402000-0xd0402fff irq 17 at device 19.1 on pci0
ohci1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0402000
ioapic0: routing intpin 17 (PCI IRQ 17) to vector 52
ohci1: [GIANT-LOCKED]
ohci1: [ITHREAD]
usb1: OHCI version 1.0, legacy support
---Type <return> to continue, or q <return> to quit---
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
ohci2: <OHCI (generic) USB controller> mem 0xd0403000-0xd0403fff irq 17 at device 19.2 on pci0
ohci2: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0403000
ohci2: [GIANT-LOCKED]
ohci2: [ITHREAD]
usb2: OHCI version 1.0, legacy support
usb2: <OHCI (generic) USB controller> on ohci2
usb2: USB revision 1.0
uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
ohci3: <OHCI (generic) USB controller> mem 0xd0404000-0xd0404fff irq 17 at device 19.3 on pci0
ohci3: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0404000
ohci3: [GIANT-LOCKED]
ohci3: [ITHREAD]
usb3: OHCI version 1.0, legacy support
usb3: <OHCI (generic) USB controller> on ohci3
usb3: USB revision 1.0
uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
ohci4: <OHCI (generic) USB controller> mem 0xd0405000-0xd0405fff irq 17 at device 19.4 on pci0
ohci4: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0405000
ohci4: [GIANT-LOCKED]
ohci4: [ITHREAD]
usb4: OHCI version 1.0, legacy support
usb4: <OHCI (generic) USB controller> on ohci4
usb4: USB revision 1.0
uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xd0406000-0xd04060ff irq 23 at device 19.5 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xd0406000
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
ehci0: Dropped interrupts workaround enabled
usb5: EHCI version 1.0
usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
usb5: <EHCI (generic) USB 2.0 controller> on ehci0
usb5: USB revision 2.0
uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
uhub5: 10 ports with 10 removable, self powered
---Type <return> to continue, or q <return> to quit---
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci1: <ATI IXP600 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x5040-0x504f irq 16 at device 20.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0x5040
ata0: <ATA channel 0> on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to vector 53
ata0: [MPSAFE]
ata0: [ITHREAD]
hdac0: <ATI SB600 High Definition Audio Controller> irq 16 at device 20.2 on pci0
hdac0: HDA Driver Revision: 20081123_0118
hdac0: Lazy allocation of 0x4000 bytes rid 0x10 type 3 at 0x80000000
hdac0: [MPSAFE]
hdac0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib5: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pcib5: domain 0
pcib5: secondary bus 2
pcib5: subordinate bus 3
pcib5: I/O decode 0xf000-0xfff
pcib5: memory decode 0xd0100000-0xd01fffff
pcib5: no prefetched decode
pcib5: Subtractively decoded bridge.
pci2: <ACPI PCI bus> on pcib5
pci2: domain=0, physical bus=2
found-> vendor=0x1180, dev=0x0476, revid=0xb6
domain=0, bus=2, slot=4, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xd0100000, size 12, enabled
pcib5: requested memory range 0xd0100000-0xd0100fff: good
pcib5: matched entry for 2.4.INTA
pcib5: slot 4 INTA hardwired to IRQ 20
cbb0: <RF5C476 PCI-CardBus Bridge> mem 0xd0100000-0xd0100fff irq 20 at device 4.0 on pci2
---Type <return> to continue, or q <return> to quit---
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xd0100000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 54
cbb0: [MPSAFE]
cbb0: [FILTER]
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x060700b6 0x00824000
0x10: 0xd0100000 0x020000dc 0x20030302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07000114
0x40: 0x30c2103c 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x30a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000008 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0xbe000000 0x00003000 0x00000000
0xc0: 0x30c2103c 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x73 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
ioapic0: routing intpin 1 (ISA IRQ 1) to vector 55
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
---Type <return> to continue, or q <return> to quit---
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
ioapic0: routing intpin 12 (ISA IRQ 12) to vector 56
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x8010
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
powernow1: <PowerNow! K8> on cpu1
ahc_isa_probe 0: ioport 0xc00 alloc failed
ex_isa_identify()
isa_probe_children: disabling PnP devices
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd1, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart0: <ns8250> failed to probe at port 0x3f8-0x3ff irq 4 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
uart2: not probed (disabled)
uart3: not probed (disabled)
isa_probe_children: probing PnP devices
ubt0: <Broadcom Corp HP Integrated Module, class 224/1, rev 2.00/1.00, addr 2> on uhub0
ubt0: Interface 0 endpoints: interrupt=0x81, bulk-in=0x82, bulk-out=0x2
ubt0: Interface 1 (alt.config 4) endpoints: isoc-in=0x83, isoc-out=0x3; wMaxPacketSize=64; nframes=10, buffer size=640
ums0: <Logitech Optical USB Mouse, class 0/0, rev 2.00/3.40, addr 2> on uhub1
---Type <return> to continue, or q <return> to quit---
ums0: 3 buttons and Z dir.
Device configuration finished.
Reducing kern.maxvnodes 124747 -> 100000
procfs registered
lapic: Divisor 2, Frequency 99746224 hz
Timecounter "TSC" frequency 1994924370 Hz quality -100
Timecounters tick every 1.000 msec
lo0: bpf attached
hptrr: no controller detected.
ata0: identify ch->devices=00010000
acpi_tz0: _AC3: temperature 66.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 66.0 >= setpoint 50.0
acpi_tz0: _AC1: temperature 66.0 >= setpoint 60.0
acpi_tz0: switched from NONE to _AC1: 66.0C
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
battery0: battery initialization start
acd0: setting PIO4 on IXP600 chip
battery1: battery initialization start
acpi_acad0: acline initialization start
acd0: <HL-DT-ST DVDRAM GSA-T20L/NC08> DVDR drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, DVDR, DVDRAM, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2: identify ch->devices=00000001
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad4: 152627MB <TOSHIBA MK1646GSX LB114C> at ata2-master SATA300
ad4: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_tz0: _AC3: temperature 66.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 66.0 >= setpoint 50.0
acpi_tz0: _AC3: temperature 66.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 66.0 >= setpoint 50.0
battery0: battery initialization done, tried 1 times
GEOM: new disk ad4
ad4: Silicon Image check3 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
ad4: LSI (v2) check1 failed
---Type <return> to continue, or q <return> to quit---
ad4: FreeBSD check1 failed
ata3: identify ch->devices=00000000
ata4: identify ch->devices=00000000
ata5: identify ch->devices=00000000
hdac0: Probing codec #0...
hdac0: HDA Codec #0: Analog Devices AD1981HD
hdac0: HDA Codec ID: 0x11d41981
hdac0: Vendor: 0x11d4
hdac0: Device: 0x1981
hdac0: Revision: 0x02
hdac0: Stepping: 0x00
hdac0: PCI Subvendor: 0x30c2103c
hdac0: Found audio FG nid=1 startnode=2 endnode=32 total=30
hdac0: Probing codec #1...
hdac0: HDA Codec #1: Lucent/Agere Systems (Unknown)
hdac0: HDA Codec ID: 0x11c11040
hdac0: Vendor: 0x11c1
hdac0: Device: 0x1040
hdac0: Revision: 0x02
hdac0: Stepping: 0x00
hdac0: PCI Subvendor: 0x30c2103c
hdac0: Found modem FG nid=1 startnode=2 endnode=127 total=125
hdac0:
hdac0: Processing audio FG cad=0 nid=1...
hdac0: GPIO: 0x40000004 NumGPIO=4 NumGPO=0 NumGPI=0 GPIWake=0 GPIUnsol=1
hdac0: GHOST: nid=2 j=0 entnum=4 index=0 res=0x00000401
hdac0: nid 5 0x92174110 as 1 seq 0 Speaker Fixed jack 7 loc 18 color Green misc 1
hdac0: nid 6 0x0421201f as 1 seq 15 Headphones Jack jack 1 loc 4 color Grey misc 0
hdac0: nid 7 0x410710f0 as 15 seq 0 Line-out None jack 7 loc 1 color Black misc 0
hdac0: nid 8 0x04a12020 as 2 seq 0 Mic Jack jack 1 loc 4 color Grey misc 0
hdac0: nid 9 0x0181302e as 2 seq 14 Line-in Jack jack 1 loc 1 color Blue misc 0
hdac0: nid 10 0x4145f0f0 as 15 seq 0 SPDIF-out None jack 5 loc 1 color Other misc 0
hdac0: nid 22 0x995711f0 as 15 seq 0 Digital-out Fixed jack 7 loc 25 color Black misc 1
hdac0: nid 23 0x5993e0f0 as 15 seq 0 AUX None jack 3 loc 25 color White misc 0
hdac0: nid 24 0xf0a79159 as 5 seq 9 Mic Both jack 7 loc 48 color Pink misc 1
hdac0: nid 25 0x593310f0 as 15 seq 0 CD None jack 3 loc 25 color Black misc 0
hdac0: Patched pins configuration:
hdac0: nid 5 0x92174110 as 1 seq 0 Speaker Fixed jack 7 loc 18 color Green misc 1
hdac0: nid 6 0x0421201f as 1 seq 15 Headphones Jack jack 1 loc 4 color Grey misc 0
hdac0: nid 7 0x410710f0 as 15 seq 0 Line-out None jack 7 loc 1 color Black misc 0 [DISABLED]
hdac0: nid 8 0x04a12020 as 2 seq 0 Mic Jack jack 1 loc 4 color Grey misc 0
hdac0: nid 9 0x0181302e as 2 seq 14 Line-in Jack jack 1 loc 1 color Blue misc 0
---Type <return> to continue, or q <return> to quit---
hdac0: nid 10 0x4145f0f0 as 15 seq 0 SPDIF-out None jack 5 loc 1 color Other misc 0 [DISABLED]
hdac0: nid 22 0x995711f0 as 15 seq 0 Digital-out Fixed jack 7 loc 25 color Black misc 1
hdac0: nid 23 0x5993e0f0 as 15 seq 0 AUX None jack 3 loc 25 color White misc 0 [DISABLED]
hdac0: nid 24 0xf0a79159 as 5 seq 9 Mic Both jack 7 loc 48 color Pink misc 1
hdac0: nid 25 0x593310f0 as 15 seq 0 CD None jack 3 loc 25 color Black misc 0 [DISABLED]
hdac0: 4 associations found:
hdac0: Association 0 (1) out:
hdac0: Pin nid=5 seq=0
hdac0: Pin nid=6 seq=15
hdac0: Association 1 (2) in:
hdac0: Pin nid=8 seq=0
hdac0: Pin nid=9 seq=14
hdac0: Association 2 (5) in:
hdac0: Pin nid=24 seq=9
hdac0: Association 3 (15) out:
hdac0: Pin nid=22 seq=0
hdac0: Tracing association 0 (1)
hdac0: Pin 5 traced to DAC 3
hdac0: Pin 6 traced to DAC 3 and hpredir 0
hdac0: Association 0 (1) trace succeded
hdac0: Tracing association 1 (2)
hdac0: Pin 8 traced to ADC 4
hdac0: Pin 9 traced to ADC 4
hdac0: Association 1 (2) trace succeded
hdac0: Tracing association 2 (5)
hdac0: Association 2 (5) trace failed
hdac0: Tracing association 3 (15)
hdac0: Unable to trace pin 22 seq 0 with min nid 0
hdac0: Association 3 (15) trace failed
hdac0: Tracing input monitor
hdac0: Tracing nid 12 to out
hdac0: Tracing beeper
hdac0: Enabling headphone/speaker audio routing switching:
hdac0: as=0 sense nid=6 [UNSOL]
hdac0: Pin sense: nid=6 res=0x0000f5df
hdac0: FG config/quirks: forcestereo ivref50 ivref80 ivref100 ivref
hdac0:
hdac0: +-------------------+
hdac0: | DUMPING HDA NODES |
hdac0: +-------------------+
hdac0:
hdac0: Default Parameter
---Type <return> to continue, or q <return> to quit---
hdac0: -----------------
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e007f
hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz
hdac0: IN amp: 0x00270300
hdac0: OUT amp: 0x80053f3d
hdac0:
hdac0: nid: 2 [DISABLED]
hdac0: Name: audio output
hdac0: Widget cap: 0x00030311
hdac0: DIGITAL STEREO
hdac0: Stream cap: 0x00000005
hdac0: AC3 PCM
hdac0: PCM cap: 0x00020060
hdac0: 16 bits, 44 48 KHz
hdac0: connections: 2
hdac0: |
hdac0: + [DISABLED] <- nid=1 [GHOST!] [UNKNOWN] (selected)
hdac0: + <- nid=4 [audio input]
hdac0:
hdac0: nid: 3
hdac0: Name: audio output
hdac0: Widget cap: 0x00000441
hdac0: PWR PROC STEREO
hdac0: Association: 0 (0x00008001)
hdac0: OSS: pcm (pcm)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x000e007f
hdac0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz
hdac0:
hdac0: nid: 4
hdac0: Name: audio input
hdac0: Widget cap: 0x00100511
hdac0: PWR STEREO
hdac0: Association: 1 (0x00004001)
hdac0: Stream cap: 0x00000001
hdac0: PCM
hdac0: PCM cap: 0x0006007f
hdac0: 16 20 bits, 8 11 16 22 32 44 48 KHz
hdac0: connections: 1
---Type <return> to continue, or q <return> to quit---
hdac0: |
hdac0: + <- nid=21 [audio selector]
hdac0:
hdac0: nid: 5
hdac0: Name: pin: Speaker (Fixed)
hdac0: Widget cap: 0x00400187
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00000001)
hdac0: Pin cap: 0x0001173f
hdac0: ISC TRQD PDC HP OUT IN VREF[ 50 80 GROUND HIZ ] EAPD
hdac0: Pin config: 0x92174110
hdac0: Pin control: 0x00000040 OUT
hdac0: EAPD: 0x00000002
hdac0: Output amp: 0x80053f3d
hdac0: mute=1 step=63 size=5 offset=61
hdac0: Input amp: 0x00270300
hdac0: mute=0 step=3 size=39 offset=0
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=3 [audio output] (selected)
hdac0: + [DISABLED] <- nid=14 [audio mixer] [DISABLED]
hdac0:
hdac0: nid: 6
hdac0: Name: pin: Headphones (Jack)
hdac0: Widget cap: 0x00400185
hdac0: UNSOL STEREO
hdac0: Association: 0 (0x00008000)
hdac0: Pin cap: 0x0000001f
hdac0: ISC TRQD PDC HP OUT
hdac0: Pin config: 0x0421201f
hdac0: Pin control: 0x000000c0 HP OUT
hdac0: Output amp: 0x80053f3d
hdac0: mute=1 step=63 size=5 offset=61
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=3 [audio output] (selected)
hdac0: + [DISABLED] <- nid=14 [audio mixer] [DISABLED]
hdac0:
hdac0: nid: 7 [DISABLED]
hdac0: Name: pin: Line-out (None)
hdac0: Widget cap: 0x00400104
hdac0: Pin cap: 0x00000010
---Type <return> to continue, or q <return> to quit---
hdac0: OUT
hdac0: Pin config: 0x410710f0
hdac0: Pin control: 0x00000000
hdac0: Output amp: 0x80053f3d
hdac0: mute=1 step=63 size=5 offset=61
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=15 [audio mixer] [DISABLED]
hdac0:
hdac0: nid: 8
hdac0: Name: pin: Mic (Jack)
hdac0: Widget cap: 0x00400083
hdac0: UNSOL STEREO
hdac0: Association: 1 (0x00000001)
hdac0: OSS: mic (mic)
hdac0: Pin cap: 0x00001727
hdac0: ISC TRQD PDC IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x04a12020
hdac0: Pin control: 0x00000024 IN VREFs
hdac0: Input amp: 0x00270300
hdac0: mute=0 step=3 size=39 offset=0
hdac0:
hdac0: nid: 9
hdac0: Name: pin: Line-in (Jack)
hdac0: Widget cap: 0x00400187
hdac0: UNSOL STEREO
hdac0: Association: 1 (0x00004000)
hdac0: OSS: line (line)
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0x0181302e
hdac0: Pin control: 0x00000024 IN VREFs
hdac0: Output amp: 0x80053f3d
hdac0: mute=1 step=63 size=5 offset=61
hdac0: Input amp: 0x00270300
hdac0: mute=0 step=3 size=39 offset=0
hdac0: connections: 2
hdac0: |
hdac0: + [DISABLED] <- nid=3 [audio output] (selected)
hdac0: + [DISABLED] <- nid=14 [audio mixer] [DISABLED]
hdac0:
hdac0: nid: 10 [DISABLED]
---Type <return> to continue, or q <return> to quit---
hdac0: Name: pin: SPDIF-out (None)
hdac0: Widget cap: 0x00400301
hdac0: DIGITAL STEREO
hdac0: Pin cap: 0x00000010
hdac0: OUT
hdac0: Pin config: 0x4145f0f0
hdac0: Pin control: 0x00000000
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=2 [audio output] [DISABLED]
hdac0:
hdac0: nid: 11 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x00300101
hdac0: STEREO
hdac0: connections: 6
hdac0: |
hdac0: + <- nid=3 [audio output] (selected)
hdac0: + <- nid=12 [audio mixer]
hdac0: + <- nid=9 [pin: Line-in (Jack)]
hdac0: + [DISABLED] <- nid=14 [audio mixer] [DISABLED]
hdac0: + <- nid=5 [pin: Speaker (Fixed)]
hdac0: + <- nid=24 [pin: Mic (Both)] [DISABLED]
hdac0:
hdac0: nid: 12
hdac0: Name: audio mixer
hdac0: Widget cap: 0x00200101
hdac0: STEREO
hdac0: Association: 1 (0x00000001)
hdac0: OSS: mic
hdac0: connections: 2
hdac0: |
hdac0: + <- nid=30 [audio selector]
hdac0: + [DISABLED] <- nid=31 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 13 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010c
hdac0: Output amp: 0x800b0f0f
hdac0: mute=1 step=15 size=11 offset=15
hdac0: connections: 2
hdac0: |
---Type <return> to continue, or q <return> to quit---
hdac0: + <- nid=16 [beep widget] (selected)
hdac0: + <- nid=22 [pin: Digital-out (Fixed)] [DISABLED]
hdac0:
hdac0: nid: 14 [DISABLED]
hdac0: Name: audio mixer
hdac0: Widget cap: 0x00200101
hdac0: STEREO
hdac0: connections: 8
hdac0: |
hdac0: + <- nid=13 [audio selector] [DISABLED]
hdac0: + <- nid=17 [audio selector] [DISABLED]
hdac0: + <- nid=18 [audio selector] [DISABLED]
hdac0: + <- nid=19 [audio selector] [DISABLED]
hdac0: + <- nid=26 [audio selector] [DISABLED]
hdac0: + <- nid=27 [audio selector] [DISABLED]
hdac0: + <- nid=28 [audio selector] [DISABLED]
hdac0: + <- nid=29 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 15 [DISABLED]
hdac0: Name: audio mixer
hdac0: Widget cap: 0x00200100
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=11 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 16
hdac0: Name: beep widget
hdac0: Widget cap: 0x00700000
hdac0: Association: -2 (0x00000000)
hdac0: OSS: speaker (speaker)
hdac0:
hdac0: nid: 17 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x80051f17
hdac0: mute=1 step=31 size=5 offset=23
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=3 [audio output]
hdac0:
hdac0: nid: 18 [DISABLED]
---Type <return> to continue, or q <return> to quit---
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x80051f17
hdac0: mute=1 step=31 size=5 offset=23
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=8 [pin: Mic (Jack)]
hdac0:
hdac0: nid: 19 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x80051f17
hdac0: mute=1 step=31 size=5 offset=23
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=9 [pin: Line-in (Jack)]
hdac0:
hdac0: nid: 20 [DISABLED]
hdac0: Name: power widget
hdac0: Widget cap: 0x00500500
hdac0: PWR
hdac0: connections: 13
hdac0: |
hdac0: + <- nid=13 [audio selector] [DISABLED] (selected)
hdac0: + <- nid=14 [audio mixer] [DISABLED]
hdac0: + <- nid=15 [audio mixer] [DISABLED]
hdac0: + <- nid=16 [beep widget]
hdac0: + <- nid=19 [audio selector] [DISABLED]
hdac0: + <- nid=20 [power widget] [DISABLED]
hdac0: + <- nid=21 [audio selector]
hdac0: + <- nid=22 [pin: Digital-out (Fixed)] [DISABLED]
hdac0: + <- nid=23 [pin: AUX (None)] [DISABLED]
hdac0: + <- nid=24 [pin: Mic (Both)] [DISABLED]
hdac0: + <- nid=25 [pin: CD (None)] [DISABLED]
hdac0: + <- nid=26 [audio selector] [DISABLED]
hdac0: + <- nid=29 [audio selector] [DISABLED]
hdac0:
hdac0: nid: 21
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
---Type <return> to continue, or q <return> to quit---
hdac0: STEREO
hdac0: Association: 1 (0x00004001)
hdac0: OSS: line, mic
hdac0: Output amp: 0x80050f00
hdac0: mute=1 step=15 size=5 offset=0
hdac0: connections: 8
hdac0: |
hdac0: + <- nid=12 [audio mixer] (selected)
hdac0: + <- nid=9 [pin: Line-in (Jack)]
hdac0: + [DISABLED] <- nid=14 [audio mixer] [DISABLED]
hdac0: + [DISABLED] <- nid=15 [audio mixer] [DISABLED]
hdac0: + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED]
hdac0: + [DISABLED] <- nid=5 [pin: Speaker (Fixed)]
hdac0: + [DISABLED] <- nid=24 [pin: Mic (Both)] [DISABLED]
hdac0: + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED]
hdac0:
hdac0: nid: 22 [DISABLED]
hdac0: Name: pin: Digital-out (Fixed)
hdac0: Widget cap: 0x00400000
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x995711f0
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 23 [DISABLED]
hdac0: Name: pin: AUX (None)
hdac0: Widget cap: 0x00400081
hdac0: UNSOL STEREO
hdac0: Pin cap: 0x00000027
hdac0: ISC TRQD PDC IN
hdac0: Pin config: 0x5993e0f0
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 24 [DISABLED]
hdac0: Name: pin: Mic (Both)
hdac0: Widget cap: 0x00400187
hdac0: UNSOL STEREO
hdac0: Pin cap: 0x00001737
hdac0: ISC TRQD PDC OUT IN VREF[ 50 80 GROUND HIZ ]
hdac0: Pin config: 0xf0a79159
hdac0: Pin control: 0x00000000
hdac0: Output amp: 0x80053f3d
---Type <return> to continue, or q <return> to quit---
hdac0: mute=1 step=63 size=5 offset=61
hdac0: Input amp: 0x00270300
hdac0: mute=0 step=3 size=39 offset=0
hdac0: connections: 2
hdac0: |
hdac0: + [DISABLED] <- nid=3 [audio output] (selected)
hdac0: + [DISABLED] <- nid=14 [audio mixer] [DISABLED]
hdac0:
hdac0: nid: 25 [DISABLED]
hdac0: Name: pin: CD (None)
hdac0: Widget cap: 0x00400001
hdac0: STEREO
hdac0: Pin cap: 0x00000020
hdac0: IN
hdac0: Pin config: 0x593310f0
hdac0: Pin control: 0x00000000
hdac0:
hdac0: nid: 26 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x80051f17
hdac0: mute=1 step=31 size=5 offset=23
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=5 [pin: Speaker (Fixed)]
hdac0:
hdac0: nid: 27 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x80051f17
hdac0: mute=1 step=31 size=5 offset=23
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=23 [pin: AUX (None)] [DISABLED]
hdac0:
hdac0: nid: 28 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x80051f17
---Type <return> to continue, or q <return> to quit---
hdac0: mute=1 step=31 size=5 offset=23
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=24 [pin: Mic (Both)] [DISABLED]
hdac0:
hdac0: nid: 29 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x80051f17
hdac0: mute=1 step=31 size=5 offset=23
hdac0: connections: 1
hdac0: |
hdac0: + [DISABLED] <- nid=25 [pin: CD (None)] [DISABLED]
hdac0:
hdac0: nid: 30
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Association: 1 (0x00000001)
hdac0: OSS: mic
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=8 [pin: Mic (Jack)]
hdac0:
hdac0: nid: 31 [DISABLED]
hdac0: Name: audio selector
hdac0: Widget cap: 0x0030010d
hdac0: STEREO
hdac0: Output amp: 0x80000000
hdac0: mute=1 step=0 size=0 offset=0
hdac0: connections: 1
hdac0: |
hdac0: + <- nid=24 [pin: Mic (Both)] [DISABLED]
hdac0:
hdac0: Processing modem FG cad=1 nid=1...
hdac0:
pcm0: <HDA Analog Devices AD1981HD PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm0: +--------------------------------------+
pcm0: | DUMPING PCM Playback/Record Channels |
---Type <return> to continue, or q <return> to quit---
pcm0: +--------------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x000e007f
pcm0: 16 20 24 bits, 8 11 16 22 32 44 48 KHz
pcm0: DAC: 3
pcm0:
pcm0: Record:
pcm0:
pcm0: Stream cap: 0x00000001
pcm0: PCM
pcm0: PCM cap: 0x0006007f
pcm0: 16 20 bits, 8 11 16 22 32 44 48 KHz
pcm0: ADC: 4
pcm0:
pcm0: +--------------------------------+
pcm0: | DUMPING Playback/Record Pathes |
pcm0: +--------------------------------+
pcm0:
pcm0: Playback:
pcm0:
pcm0: nid=5 [pin: Speaker (Fixed)]
pcm0: |
pcm0: + <- nid=3 [audio output] [src: pcm]
pcm0:
pcm0: nid=6 [pin: Headphones (Jack)]
pcm0: |
pcm0: + <- nid=3 [audio output] [src: pcm]
pcm0:
pcm0: Record:
pcm0:
pcm0: nid=4 [audio input]
pcm0: |
pcm0: + <- nid=21 [audio selector] [src: line, mic]
pcm0: |
pcm0: + <- nid=12 [audio mixer] [src: mic]
pcm0: |
pcm0: + <- nid=30 [audio selector] [src: mic]
pcm0: |
---Type <return> to continue, or q <return> to quit---
pcm0: + <- nid=8 [pin: Mic (Jack)] [src: mic]
pcm0: + <- nid=9 [pin: Line-in (Jack)] [src: line]
pcm0:
pcm0: +-------------------------+
pcm0: | DUMPING Volume Controls |
pcm0: +-------------------------+
pcm0:
pcm0: Master Volume (OSS: vol)
pcm0: |
pcm0: +- ctl 1 (nid 5 in ): -91/3dB (64 steps) + mute
pcm0: +- ctl 3 (nid 6 in ): -91/3dB (64 steps) + mute
pcm0:
pcm0: PCM Volume (OSS: pcm)
pcm0: |
pcm0: +- ctl 1 (nid 5 in ): -91/3dB (64 steps) + mute
pcm0: +- ctl 3 (nid 6 in ): -91/3dB (64 steps) + mute
pcm0:
pcm0: Microphone Volume (OSS: mic)
pcm0: |
pcm0: +- ctl 5 (nid 8 out): 0/30dB (4 steps)
pcm0: +- ctl 19 (nid 30 out): mute
pcm0:
pcm0: Line-in Volume (OSS: line)
pcm0: |
pcm0: +- ctl 7 (nid 9 out): 0/30dB (4 steps)
pcm0:
pcm0: Recording Level (OSS: rec)
pcm0: |
pcm0: +- ctl 12 (nid 21 out): 0/22dB (16 steps) + mute
pcm0: +- ctl 19 (nid 30 out): mute
pcm0:
pcm0: Mixer "vol":
pcm0: Mixer "pcm":
pcm0: Mixer "line":
pcm0: Mixer "mic":
pcm0: Mixer "rec":
pcm0: Mixer "ogain":
pcm0: clone manager: deadline=750ms flags=0x8000001e
pcm0: sndbuf_setmap 1970000, 4000; 0xfffffffe78dc3000 -> 1970000
pcm0: sndbuf_setmap 1780000, 4000; 0xfffffffe78dd3000 -> 1780000
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
---Type <return> to continue, or q <return> to quit---
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x00010000 pcm: 0x00000400
ioapic0: Assigning ISA IRQ 1 to local APIC 0
ioapic0: Assigning ISA IRQ 9 to local APIC 1
ioapic0: Assigning ISA IRQ 12 to local APIC 0
ioapic0: Assigning ISA IRQ 14 to local APIC 1
ioapic0: Assigning PCI IRQ 16 to local APIC 0
ioapic0: Assigning PCI IRQ 17 to local APIC 1
ioapic0: Assigning PCI IRQ 20 to local APIC 0
ioapic0: Assigning PCI IRQ 23 to local APIC 1
msi: Assigning MSI IRQ 256 to local APIC 0
Trying to mount root from ufs:/dev/ad4s1a
WARNING: / was not properly dismounted
/: mount pending error: blocks 8 files 3
ct_to_ts([2008-12-16 19:33:55]) = 1229456035.000000000
start_init: trying /sbin/init
<118>Entropy harvesting: kickstart.
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00 0x01
(probe0:ata0:0:0:0): error 22
(probe0:ata0:0:0:0): Unretryable Error
pass0 at ata0 bus 0 target 0 lun 0
pass0: <HL-DT-ST DVDRAM GSA-T20L NC08> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
GEOM: new disk cd0
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
cd0 at ata0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-T20L NC08> Removable CD-ROM SCSI-0 device
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
(cd0:ata0:0:0:0): error 6
(cd0:ata0:0:0:0): Unretryable Error
acpi_tz0: _AC3: temperature 59.0 >= setpoint 40.0
acpi_tz0: _AC2: temperature 59.0 >= setpoint 50.0
---Type <return> to continue, or q <return> to quit---
acpi_tz0: switched from _AC1 to _AC2: 59.0C
acpi_tz0: _AC3: temperature 59.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 59.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 57.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 55.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 55.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 54.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 53.0 >= setpoint 40.0
battery1: battery initialization failed, giving up
acpi_tz0: _AC3: temperature 53.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 53.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 53.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 52.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 55.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 54.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 54.0 >= setpoint 40.0
<118>/dev/ad4s1a: FREE BLK COUNT(S) WRONG IN SUPERBLK (SALVAGED)
<118>/dev/ad4s1a: SUMMARY INFORMATION BAD (SALVAGED)
<118>/dev/ad4s1a: BLK(S) MISSING IN BIT MAPS (SALVAGED)
<118>/dev/ad4s1a: 453034 files, 20740782 used, 53902307 free (100531 frags, 6725222 blocks, 0.1% fragmentation)
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
<118>/etc/rc: WARNING: $hostname is not set -- see rc.conf(5).
<118>Starting Network: lo0.
<118>hw.bus.devctl_disable: 0 -> 1
<118>Additional TCP/IP options: tcp extensions=NO TCP keepalive=NO.
<118>savecore: reboot after panic: page fault
<118>savecore: writing core to vmcore.10
acpi_tz0: _AC3: temperature 53.0 >= setpoint 40.0
<118>Removing stale Samba tdb files: done
<118>Configuring syscons: blanktime.
<118>Local package initialization:[: =: unexpected operator
acpi_tz0: _AC3: temperature 53.0 >= setpoint 40.0
<118>ipfw: : (skipping /usr/local/etc/rc.d/kdm.sh, not executable) rtcLinux ELF exec handler installed
<118>.
<118>/etc/rc.d/sysctl: WARNING: sysctl dev.pcm.0.vchans does not exist.
<118>
<118>Tue Dec 16 19:36:18 MSK 2008
<118>date: : acpi_tz0: _AC3: temperature 52.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 52.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 51.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 51.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 51.0 >= setpoint 40.0
---Type <return> to continue, or q <return> to quit---
acpi_tz0: _AC3: temperature 51.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 51.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 51.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 50.0 >= setpoint 40.0
hdac0: wake_prep disabled wake for \_SB_.C08B.C0FD (S3)
pci0:1:5:0: Transition from D0 to D3
pci0:16:0:0: Transition from D0 to D3
vga0: saving 68 bytes of video state
pci0:0:18:0: Transition from D0 to D3
pci0:0:19:5: Transition from D0 to D3
pci0:0:20:2: Transition from D0 to D3
acpi_tz0: _AC3: temperature 54.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 54.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 54.0 >= setpoint 40.0
acpi_tz0: switched from _AC2 to _AC3: 54.0C
ata2: reiniting channel ..
ata2: CONNECT requested
ata2: SATA connect time=0ms
ata2: BUSY wait time=1ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=00000001
ata2: CONNECTED
ata2: SATA connect time=0ms
ata2: BUSY wait time=1ms
ata2: SIGNATURE: 00000101
ata2: ahci_reset devices=00000001
ata2: identify ch->devices=00000001
ata2: reinit done ..
---Type <return> to continue, or q <return> to quit---
ata3: reiniting channel ..
ata3: port not implemented
ata3: reinit done ..
ata4: reiniting channel ..
ata4: port not implemented
ata4: reinit done ..
ata5: reiniting channel ..
ata5: port not implemented
ata5: reinit done ..
acpi_tz0: _AC2: temperature 56.0 >= setpoint 55.0
acpi_tz0: switched from _AC3 to _AC2: 56.0C
acpi_tz0: _AC3: temperature 56.0 >= setpoint 40.0
acpi_tz0: _AC3: temperature 56.0 >= setpoint 40.0
ata0: reiniting channel ..
ata0: reset tp1 mask=03 ostat0=00 ostat1=00
ata0: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb
ata0: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=00 stat1=00 devices=0x10000
ubt0: at uhub0 port 2 (addr 2) disconnected
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire
ad: ad4 already exists; skipping it
ad: ad4 already exists; skipping it
Fatal trap 12: page fault while in kernel mode
cpuid = 1; apic id = 01
fault virtual address = 0x50
fault code = supervisor read data, page not present
instruction pointer = 0x8:0xffffffff80551631
stack pointer = 0x10:0xfffffffe4005bad0
frame pointer = 0x10:0xfffffffe4005bb20
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 0 (thread taskq)
trap number = 12
panic: page fault
cpuid = 1
Uptime: 6m23s
Physical memory: 1905 MB
Dumping 217 MB: 202 186 170 154 138 122 106 90 74 58 42 26 10(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb)
(kgdb) quit
HP# exit
exit
Script done on Tue Dec 16 19:50:51 2008
More information about the freebsd-amd64
mailing list