tyan am2 boards

Thu Oct 19 08:55:14 PDT 2006

Ken Gunderson wrote:
> Greetings All:
> 
> Perchance does anyone have any experience with either of these
> Tyan AM2 boards they could share??
> 
> Tomcat n3400B (S2925) - nVidia nForce Pro 3400 based
> <http://www.tyan.com/products/html/tomcatn3400b_spec.html>
> 
> 
> Tomcat h1000S (S3950) - Broadcom ht1000 based
> <http://www.tyan.com/products/html/tomcath1000s.html>

I have this board since yesterday. With SATA in P-ATA emulation it boots
and I'm able to install 6.1-RELAESE on the both SATA disks (ad6, ad10)
with gmirror.

Whats not working is any kind of temperature or fan-speed monitoring, I
just don't get the hw.acpi.thermal stuff and building the kernel with
smb and intpm support does not give the /dev/smb device.

Also this amr_linux failure looks odd, but I get that on other Tyan
boards too.

I don't use the onboard raid-stuff, so I can't say anything about that.

Don't wonder about the UDMA33 message of the harddisks, they both work
in full speed. Got 50MByte/s sustained while syncing the gmirror.

If you have any tests or questions, the system will not be in production
until end of next week or so, so I can play if you have any specific
questions :-)

dmesg:

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p10 #0: Thu Oct 19 15:16:05 CEST 2006
    root at server1:/usr/obj/usr/src/sys/SMP-FOO
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ (2194.51-MHz
K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
  Cores per package: 2
real memory  = 2147418112 (2047 MB)
avail memory = 2062290944 (1966 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 1.1> irqs 0-15 on motherboard
ioapic1 <Version 1.1> irqs 16-31 on motherboard
ioapic2 <Version 1.1> irqs 32-47 on motherboard
kbd0 at kbdmux0
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
acpi0: Sleep Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x508-0x50b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci1
pci2: <ACPI PCI bus> on pcib2
atapci0: <GENERIC ATA controller> port
0xc080-0xc087,0xc000-0xc003,0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb80f
mem 0xff3fe000-0xff3fffff irq 11 at device 14.0 on pci1
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <GENERIC ATA controller> port
0xcc00-0xcc07,0xc880-0xc883,0xc800-0xc807,0xc480-0xc483,0xc400-0xc40f
irq 11 at device 14.1 on pci1
ata4: <ATA channel 0> on atapci1
ata5: <ATA channel 1> on atapci1
atapci2: <GENERIC ATA controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
isab0: <PCI-ISA bridge> at device 2.2 on pci0
isa0: <ISA bus> on isab0
ohci0: <OHCI (generic) USB controller> port 0xe000-0xe0ff mem
0xff6b4000-0xff6b4fff irq 10 at device 3.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <OHCI (generic) USB controller> port 0xe400-0xe4ff mem
0xff6b5000-0xff6b5fff irq 10 at device 3.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> port 0xe800-0xe8ff mem
0xff6b6000-0xff6b6fff irq 10 at device 3.2 on pci0
ehci0: [GIANT-LOCKED]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <EHCI (generic) USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: (0x1166) EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0xdc00-0xdc3f mem 0xff680000-0xff69ffff,0xff660000-0xff67ffff irq 24 at
device 4.0 on pci0
em0: Ethernet address: 00:e0:81:5e:bd:f4
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port
0xd880-0xd8bf mem 0xff620000-0xff63ffff,0xff600000-0xff61ffff irq 25 at
device 5.0 on pci0
em1: Ethernet address: 00:e0:81:5e:bd:f5
pci0: <display, VGA> at device 6.0 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
acpi0
sio0: type 16550A, console
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc9fff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
module_register_init: MOD_LOAD (amr_linux, 0xffffffff8062e300, 0) error 6
ad4: 238475MB <Seagate ST3250820NS 3.AEE> at ata2-master UDMA33
GEOM_MIRROR: Device gm0 created (id=4289931757).
GEOM_MIRROR: Device gm0: provider ad4 detected.
ad6: 238475MB <Seagate ST3250820NS 3.AEE> at ata3-master UDMA33
SMP: AP CPU #1 Launched!
GEOM_MIRROR: Device gm0: provider ad6 detected.
GEOM_MIRROR: Device gm0: provider ad6 activated.
GEOM_MIRROR: Device gm0: provider ad4 activated.
GEOM_MIRROR: Device gm0: provider mirror/gm0 launched.
Trying to mount root from ufs:/dev/mirror/gm0s1a