nvnet does not see NVidia's adapter on amd64

Mikhail Teterin mi+mx at aldan.algebra.com
Wed Apr 13 15:03:24 PDT 2005


Hi!

I just installed a fresh 5.4-RC2 on IWill's DK8N motherboard:

	http://www.iwillusa.com/product_2.asp?p_id=27

I transfered the net/nvnet's distfiles using a floppy and built the driver.

Unfortunately, kldload-ing if_nv did not make the interface appear... Putting 
``if_nv_load="YES"'' into loader.conf and rebooting did not help either.

Is there anything, you can suggest for me try right off the bat?

I'm attaching the dmesg.boot and the output of 'pciconf -lv'. Thanks!

Yours,

	-mi
-------------- next part --------------
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib1:   secondary bus     2
pcib1:   subordinate bus   2
pcib1:   I/O decode        0x9000-0x9fff
pcib1:   memory decode     0xff100000-0xff1fffff
pcib1:   prefetched decode 0xe6900000-0xee8fffff
pcib1: could not get PCI interrupt routing table for \\_SB_.PCI0.P0P2 - AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
	map[10]: type 3, range 32, base e8000000, size 26, enabled
pcib1: device (null) requested decoded memory range 0xe8000000-0xebffffff
	map[14]: type 4, range 32, base 00009800, size  8, enabled
pcib1: device (null) requested decoded I/O range 0x9800-0x98ff
	map[18]: type 1, range 32, base ff1fc000, size 14, enabled
pcib1: device (null) requested decoded memory range 0xff1fc000-0xff1fffff
pcib0: matched entry for 0.11.INTA (src \\_SB_.LNKE)
pcib0: possible interrupts: 16 17 18 19
ACPI PCI link arbitrated settings:
\\_SB_.LNKB (references 3, priority 840):
	interrupts:	    19    18    17    16
	penalty:	   280   280   280   280
\\_SB_.LKSM (references 1, priority 706):
	interrupts:	    20    22    21
	penalty:	   640   740   740
\\_SB_.LKMO (references 1, priority 706):
	interrupts:	    20    22    21
	penalty:	   640   740   740
\\_SB_.LTIE (references 1, priority 706):
	interrupts:	    20    22    21
	penalty:	   640   740   740
\\_SB_.LNKE (references 1, priority 280):
	interrupts:	    19    18    17    16
	penalty:	   280   280   280   280
pcib0: slot 11 INTA routed to irq 19 via \\_SB_.LNKE
pcib1: slot 0 INTA is routed to irq 19
found->	vendor=0x1002, dev=0x5446, revid=0x00
	bus=2, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0087, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=19
	powerspec 2  supports D0 D1 D3  current D0
pci2: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib2:   secondary bus     1
pcib2:   subordinate bus   1
pcib2:   I/O decode        0xf000-0xfff
pcib2:   memory decode     0xff000000-0xff0fffff
pcib2:   prefetched decode 0xfff00000-0xfffff
ACPI link \\_SB_.LNKD has invalid initial irq 10, ignoring
ACPI link \\_SB_.LNKC has invalid initial irq 10, ignoring
ACPI PCI link initial configuration:
\\_SB_.LNKD irq  0: [16 17 18 19]  0+ low,level,sharable 1.7.0
\\_SB_.LNKA irq  0: [16 17 18 19]  0+ low,level,sharable 1.7.1
\\_SB_.LNKB irq  0: [16 17 18 19]  0+ low,level,sharable 1.7.2
\\_SB_.LNKC irq  0: [16 17 18 19]  0+ low,level,sharable 1.7.3
\\_SB_.LNKC irq  0: [16 17 18 19]  0+ low,level,sharable 1.6.0
\\_SB_.LNKD irq  0: [16 17 18 19]  0+ low,level,sharable 1.6.1
\\_SB_.LNKA irq  0: [16 17 18 19]  0+ low,level,sharable 1.6.2
\\_SB_.LNKB irq  0: [16 17 18 19]  0+ low,level,sharable 1.6.3
pci1: <ACPI PCI bus> on pcib2
pci1: physical bus=1
	map[10]: type 1, range 32, base ff0ff800, size 11, enabled
pcib2: device (null) requested decoded memory range 0xff0ff800-0xff0fffff
	map[14]: type 1, range 32, base ff0f8000, size 14, enabled
pcib2: device (null) requested decoded memory range 0xff0f8000-0xff0fbfff
pcib2: matched entry for 1.6.INTA (src \\_SB_.LNKC)
pcib2: possible interrupts: 16 17 18 19
ACPI PCI link arbitrated settings:
\\_SB_.LNKB (references 5, priority 2212):
	interrupts:	    18    17    16    19
	penalty:	   440   440   440   450
\\_SB_.LNKD (references 2, priority 885):
	interrupts:	    18    17    16    19
	penalty:	   440   440   440   450
\\_SB_.LNKA (references 2, priority 885):
	interrupts:	    18    17    16    19
	penalty:	   440   440   440   450
\\_SB_.LNKC (references 2, priority 885):
	interrupts:	    18    17    16    19
	penalty:	   440   440   440   450
\\_SB_.LKSM (references 1, priority 706):
	interrupts:	    20    21    22
	penalty:	   640   740   740
\\_SB_.LKMO (references 1, priority 706):
	interrupts:	    20    21    22
	penalty:	   640   740   740
\\_SB_.LTIE (references 1, priority 706):
	interrupts:	    20    21    22
	penalty:	   640   740   740
pcib2: slot 6 INTA routed to irq 18 via \\_SB_.LNKC
found->	vendor=0x104c, dev=0x8023, revid=0x00
	bus=1, slot=6, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x0210, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
	intpin=a, irq=18
	powerspec 2  supports D0 D1 D2 D3  current D0
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xff0f8000-0xff0fbfff,0xff0ff800-0xff0fffff irq 18 at device 6.0 on pci1
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xff0ff800
fwohci0: [MPSAFE]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:01:46:87
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:01:46:87
fwe0: bpf attached
fwe0: Ethernet address: 02:00:00:01:46:87
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcib3: <ACPI Host-PCI bridge> on acpi0
pcib3: could not get PCI interrupt routing table for \\_SB_.PCIB - AE_NOT_FOUND
pci3: <ACPI PCI bus> on pcib3
pci3: physical bus=3
found->	vendor=0x1022, dev=0x7450, revid=0x12
	bus=3, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0117, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
	map[10]: type 1, range 64, base ff6fe000, size 12, enabled
found->	vendor=0x1022, dev=0x7451, revid=0x01
	bus=3, slot=1, func=1
	class=08-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x1022, dev=0x7450, revid=0x12
	bus=3, slot=2, func=0
	class=06-04-00, hdrtype=0x01, mfdev=1
	cmdreg=0x0116, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 64, base ff6ff000, size 12, enabled
found->	vendor=0x1022, dev=0x7451, revid=0x01
	bus=3, slot=2, func=1
	class=08-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci3
pcib4:   secondary bus     5
pcib4:   subordinate bus   5
pcib4:   I/O decode        0xd000-0xefff
pcib4:   memory decode     0xff400000-0xff5fffff
pcib4:   prefetched decode 0xfff00000-0xfffff
ACPI PCI link initial configuration:
pci5: <ACPI PCI bus> on pcib4
pci5: physical bus=5
	map[10]: type 4, range 32, base 0000ec00, size  3, enabled
pcib4: device (null) requested decoded I/O range 0xec00-0xec07
	map[14]: type 4, range 32, base 0000e800, size  2, enabled
pcib4: device (null) requested decoded I/O range 0xe800-0xe803
	map[18]: type 4, range 32, base 0000e400, size  3, enabled
pcib4: device (null) requested decoded I/O range 0xe400-0xe407
	map[1c]: type 4, range 32, base 0000e000, size  2, enabled
pcib4: device (null) requested decoded I/O range 0xe000-0xe003
	map[20]: type 4, range 32, base 0000dc00, size  4, enabled
pcib4: device (null) requested decoded I/O range 0xdc00-0xdc0f
	map[24]: type 1, range 32, base ff5ffc00, size 10, enabled
pcib4: device (null) requested decoded memory range 0xff5ffc00-0xff5fffff
pcib4: matched entry for 5.3.INTA
pcib4: slot 3 INTA hardwired to IRQ 27
found->	vendor=0x1095, dev=0x3114, revid=0x02
	bus=5, slot=3, func=0
	class=01-80-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0107, statreg=0x02b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=27
	powerspec 2  supports D0 D1 D2 D3  current D0
atapci2: <SiI 3114 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 mem 0xff5ffc00-0xff5fffff irq 27 at device 3.0 on pci5
atapci2: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdc00
atapci2: [MPSAFE]
atapci2: Reserved 0x400 bytes for rid 0x24 type 3 at 0xff5ffc00
ata4: channel #0 on atapci2
ata4: reset tp1 mask=01 ostat0=50 ostat1=50
ata4-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata4-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata4-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata4: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata4: [MPSAFE]
ata5: channel #1 on atapci2
ata5: reset tp1 mask=01 ostat0=50 ostat1=50
ata5-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata5: [MPSAFE]
ata6: channel #2 on atapci2
ata6: reset tp1 mask=01 ostat0=7f ostat1=7f
ata6-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata6-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata6-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata6-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata6-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata6-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata6-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata6: reset tp2 stat0=ff stat1=00 devices=0x0
ata6: [MPSAFE]
ata7: channel #3 on atapci2
ata7: reset tp1 mask=01 ostat0=7f ostat1=7f
ata7-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata7-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata7-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata7-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata7-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata7-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata7-master: stat=0x7f err=0x00 lsb=0x00 msb=0x00
ata7: reset tp2 stat0=ff stat1=00 devices=0x0
ata7: [MPSAFE]
pci3: <base peripheral, interrupt controller> at device 1.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3
pcib5:   secondary bus     4
pcib5:   subordinate bus   4
pcib5:   I/O decode        0x0-0x0
pcib5:   memory decode     0xff300000-0xff3fffff
pcib5:   prefetched decode 0xfea00000-0xfeafffff
ACPI PCI link initial configuration:
pci4: <ACPI PCI bus> on pcib5
pci4: physical bus=4
	map[10]: type 3, range 32, base feaf0000, size 16, enabled
pcib5: device (null) requested decoded memory range 0xfeaf0000-0xfeafffff
pcib5: matched entry for 4.1.INTA
pcib5: slot 1 INTA hardwired to IRQ 29
found->	vendor=0x1000, dev=0x1960, revid=0x01
	bus=4, slot=1, func=0
	class=01-04-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0116, statreg=0x04b0, cachelnsz=16 (dwords)
	lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=29
	powerspec 2  supports D0 D3  current D0
amr0: <LSILogic MegaRAID 1.51> mem 0xfeaf0000-0xfeafffff irq 29 at device 1.0 on pci4
amr0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xfeaf0000
amr0: [MPSAFE]
amr0: <LSILogic MegaRAID SATA 150-6D> Firmware 712T, BIOS G116, 64MB RAM
pci3: <base peripheral, interrupt controller> at device 2.1 (no driver attached)
acpi_button0: <Power Button> on acpi0
unknown: not probed (disabled)
sio0: irq maps: 0xa3 0xb3 0xa3 0xa3
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: irq maps: 0xa3 0xab 0xa3 0xa3
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ahc_isa_probe 10: ioport 0xac00 alloc failed
ahc_isa_probe 11: ioport 0xbc00 alloc failed
ahc_isa_probe 12: ioport 0xcc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
ex_isa_identify()
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xc8800-0xccfff,0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
isa_probe_children: probing PnP devices
Device configuration finished.
Reducing kern.maxvnodes 132744 -> 100000
procfs registered
linprocfs registered
Timecounter "TSC" frequency 1800005863 Hz quality 800
Timecounters tick every 1.000 msec
Linux ELF exec handler installed
lo0: bpf attached
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on nVidia nForce3 Pro chip
acd0: <FX320S/q01> CDROM drive at ata1 as master
acd0: read 5512KB/s (5512KB/s), 256KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata4-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad8: <ST3200822AS/3.01> ATA-6 disk at ata4-master
ad8: 190782MB (390721968 sectors), 387621 C, 16 H, 63 S, 512 B
ad8: 16 secs/int, 1 depth queue, SATA150
ar: LSI check1 failed
ata5-master: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0
GEOM: new disk ad8
[0] f:00 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:16771797
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:16771860 l:4192965
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:20964825 l:16771860
[3] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:37736685 l:352980180
GEOM: Configure ad8s1, start 32256 length 8587160064 end 8587192319
GEOM: Configure ad8s2, start 8587192320 length 2146798080 end 10733990399
GEOM: Configure ad8s3, start 10733990400 length 8587192320 end 19321182719
GEOM: Configure ad8s4, start 19321182720 length 180725852160 end 200047034879
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad8s1b, start 0 length 8587160064 end 8587160063
GEOM: Configure ad8s1c, start 0 length 8587160064 end 8587160063
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad8s2a, start 0 length 2146798080 end 2146798079
GEOM: Configure ad8s2c, start 0 length 2146798080 end 2146798079
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad8s3c, start 0 length 8587192320 end 8587192319
GEOM: Configure ad8s3d, start 0 length 8587192320 end 8587192319
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad8s4c, start 0 length 180725852160 end 180725852159
GEOM: Configure ad8s4d, start 0 length 180725852160 end 180725852159
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
ata5: reiniting channel ..
ata5: reset tp1 mask=01 ostat0=50 ostat1=50
ata5-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata5: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata5: resetting done ..
ata5-master: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0
ata5: reiniting channel ..
ata5-master: FAILURE - ATA_IDENTIFY timed out
ata5: device config done ..
ata5-master: FAILURE - ATA_IDENTIFY timed out
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 953885MB (1953556480 sectors) RAID 5 (optimal)
GEOM: new disk amrd0
(probe21:amr0:0:15:0): error 22
(probe21:amr0:0:15:0): Unretryable Error
(probe13:amr0:0:6:0): error 22
(probe13:amr0:0:6:0): Unretryable Error
(probe14:amr0:0:8:0): error 22
(probe14:amr0:0:8:0): Unretryable Error
(probe15:amr0:0:9:0): error 22
(probe15:amr0:0:9:0): Unretryable Error
(probe16:amr0:0:10:0): error 22
(probe16:amr0:0:10:0): Unretryable Error
(probe17:amr0:0:11:0): error 22
(probe17:amr0:0:11:0): Unretryable Error
(probe18:amr0:0:12:0): error 22
(probe18:amr0:0:12:0): Unretryable Error
(probe19:amr0:0:13:0): error 22
(probe19:amr0:0:13:0): Unretryable Error
(probe20:amr0:0:14:0): error 22
(probe20:amr0:0:14:0): Unretryable Error
(probe12:amr0:0:5:0): error 22
(probe12:amr0:0:5:0): Unretryable Error
(probe11:amr0:0:4:0): error 22
(probe11:amr0:0:4:0): Unretryable Error
(probe9:amr0:0:2:0): error 22
(probe9:amr0:0:2:0): Unretryable Error
(probe7:amr0:0:0:0): error 22
(probe7:amr0:0:0:0): Unretryable Error
(probe8:amr0:0:1:0): error 22
(probe8:amr0:0:1:0): Unretryable Error
(probe10:amr0:0:3:0): error 22
(probe10:amr0:0:3:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 3 (ISA IRQ 3) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 18 (PCI IRQ 18) to cluster 0
ioapic0: routing intpin 21 (PCI IRQ 21) to cluster 0
ioapic0: routing intpin 22 (PCI IRQ 22) to cluster 0
ioapic1: routing intpin 3 (PCI IRQ 27) to cluster 0
ioapic2: routing intpin 1 (PCI IRQ 29) to cluster 0
Mounting root from ufs:/dev/ad8s2a
start_init: trying /sbin/init
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...3 2 2 1 0 0 done
No buffers busy after final sync
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RC2 #0: Sun Apr 10 04:02:23 UTC 2005
    root at portnoy.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Opteron(tm) Processor 244 (1800.01-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0xf58  Stepping = 8
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 2146697216 (2047 MB)
avail memory = 2060873728 (1965 MB)
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-27 on motherboard
ioapic2 <Version 1.1> irqs 28-31 on motherboard
acpi0: <A M I OEMXSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI link \\_SB_.LUS0 has invalid initial irq 10, ignoring
ACPI link \\_SB_.LKLN has invalid initial irq 5, ignoring
ACPI link \\_SB_.LUS1 has invalid initial irq 11, ignoring
ACPI link \\_SB_.LUS2 has invalid initial irq 7, ignoring
ACPI link \\_SB_.LNKE has invalid initial irq 11, ignoring
ACPI link \\_SB_.LNKB has invalid initial irq 10, ignoring
ACPI link \\_SB_.LTIE has invalid initial irq 10, ignoring
pci0: <ACPI PCI bus> on pcib0
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xff2fb000-0xff2fbfff irq 22 at device 2.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <OHCI (generic) USB controller> mem 0xff2fc000-0xff2fcfff irq 21 at device 2.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <OHCI (generic) USB controller> on ohci1
usb1: USB revision 1.0
uhub1: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 2.2 (no driver attached)
pci0: <bridge> at device 5.0 (no driver attached)
pci0: <multimedia, audio> at device 6.0 (no driver attached)
atapci0: <nVidia nForce3 Pro UDMA133 controller> port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 8.0 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
atapci1: <GENERIC ATA controller> port 0xbc00-0xbc0f,0xc000-0xc003,0xc400-0xc407,0xc800-0xc803,0xcc00-0xcc07 irq 21 at device 10.0 on pci0
ata2: channel #0 on atapci1
ata3: channel #1 on atapci1
pcib1: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci2: <ACPI PCI bus> on pcib1
pci2: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 14.0 on pci0
ACPI link \\_SB_.LNKD has invalid initial irq 10, ignoring
ACPI link \\_SB_.LNKC has invalid initial irq 10, ignoring
pci1: <ACPI PCI bus> on pcib2
fwohci0: <Texas Instruments TSB43AB22/A> mem 0xff0f8000-0xff0fbfff,0xff0ff800-0xff0fffff irq 18 at device 6.0 on pci1
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:00:00:00:00:01:46:87
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:00:00:01:46:87
fwe0: Ethernet address: 02:00:00:01:46:87
fwe0: if_start running deferred for Giant
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
pcib3: <ACPI Host-PCI bridge> on acpi0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci3
pci5: <ACPI PCI bus> on pcib4
atapci2: <SiI 3114 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 mem 0xff5ffc00-0xff5fffff irq 27 at device 3.0 on pci5
ata4: channel #0 on atapci2
ata5: channel #1 on atapci2
ata6: channel #2 on atapci2
ata7: channel #3 on atapci2
pci3: <base peripheral, interrupt controller> at device 1.1 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci3
pci4: <ACPI PCI bus> on pcib5
amr0: <LSILogic MegaRAID 1.51> mem 0xfeaf0000-0xfeafffff irq 29 at device 1.0 on pci4
amr0: <LSILogic MegaRAID SATA 150-6D> Firmware 712T, BIOS G116, 64MB RAM
pci3: <base peripheral, interrupt controller> at device 2.1 (no driver attached)
acpi_button0: <Power Button> on acpi0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
fdc0: <floppy drive controller (FDE)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
orm0: <ISA Option ROMs> at iomem 0xc8800-0xccfff,0xc0000-0xc7fff on isa0
ppc0: cannot reserve I/O port range
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1800006073 Hz quality 800
Timecounters tick every 1.000 msec
acd0: CDROM <FX320S/q01> at ata1-master PIO4
ad8: 190782MB <ST3200822AS/3.01> [387621/16/63] at ata4-master SATA150
ata5-master: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0
ata5-master: FAILURE - ATA_IDENTIFY status=51<READY,DSC,ERROR> error=4<ABORTED> LBA=0
ata5-master: FAILURE - ATA_IDENTIFY timed out
ata5-master: FAILURE - ATA_IDENTIFY timed out
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 953885MB (1953556480 sectors) RAID 5 (optimal)
Mounting root from ufs:/dev/ad8s2a
-------------- next part --------------
hostb0 at pci0:0:0:	class=0x060000 card=0x00000000 chip=0x00e110de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = HOST-PCI
isab0 at pci0:1:0:	class=0x060100 card=0x004415d4 chip=0x00e010de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-ISA
none0 at pci0:1:1:	class=0x0c0500 card=0x004415d4 chip=0x00e410de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce PCI System Management'
    class    = serial bus
    subclass = SMBus
ohci0 at pci0:2:0:	class=0x0c0310 card=0x004415d4 chip=0x00e710de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = USB
ohci1 at pci0:2:1:	class=0x0c0310 card=0x004415d4 chip=0x00e710de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = USB
none1 at pci0:2:2:	class=0x0c0320 card=0x004415d4 chip=0x00e810de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = serial bus
    subclass = USB
none2 at pci0:5:0:	class=0x068000 card=0x004415d4 chip=0x00df10de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'Network Bus Enumerator'
    class    = bridge
none3 at pci0:6:0:	class=0x040100 card=0x004415d4 chip=0x00ea10de rev=0xa1 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    class    = multimedia
    subclass = audio
atapci0 at pci0:8:0:	class=0x01018a card=0x004415d4 chip=0x00e510de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'CK8S Parallel ATA Controller'
    class    = mass storage
    subclass = ATA
atapci1 at pci0:10:0:	class=0x010185 card=0x00000000 chip=0x00e310de rev=0xa2 hdr=0x00
    vendor   = 'NVIDIA Corporation'
    device   = 'CK8S Serial ATA Controller'
    class    = mass storage
    subclass = ATA
pcib1 at pci0:11:0:	class=0x060400 card=0x00000000 chip=0x00e210de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    device   = 'nForce3 250 AGP Host to PCI Bridge'
    class    = bridge
    subclass = PCI-PCI
pcib2 at pci0:14:0:	class=0x060400 card=0x00000000 chip=0x00ed10de rev=0xa2 hdr=0x01
    vendor   = 'NVIDIA Corporation'
    class    = bridge
    subclass = PCI-PCI
hostb1 at pci0:24:0:	class=0x060000 card=0x00000000 chip=0x11001022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron HyperTransport Technology Configuration'
    class    = bridge
    subclass = HOST-PCI
hostb2 at pci0:24:1:	class=0x060000 card=0x00000000 chip=0x11011022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Address Map'
    class    = bridge
    subclass = HOST-PCI
hostb3 at pci0:24:2:	class=0x060000 card=0x00000000 chip=0x11021022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron DRAM Controller'
    class    = bridge
    subclass = HOST-PCI
hostb4 at pci0:24:3:	class=0x060000 card=0x00000000 chip=0x11031022 rev=0x00 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'Athlon 64 / Opteron Miscellaneous Control'
    class    = bridge
    subclass = HOST-PCI
none4 at pci2:0:0:	class=0x030000 card=0x04081002 chip=0x54461002 rev=0x00 hdr=0x00
    vendor   = 'ATI Technologies Inc.'
    device   = 'Rage 128 PRO ULTRA Video Controller (VGA Compatible)'
    class    = display
    subclass = VGA
fwohci0 at pci1:6:0:	class=0x0c0010 card=0x8023104c chip=0x8023104c rev=0x00 hdr=0x00
    vendor   = 'Texas Instruments (TI)'
    device   = 'TSB43AB22/A IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr'
    class    = serial bus
    subclass = FireWire
pcib4 at pci3:1:0:	class=0x060400 card=0x000000a0 chip=0x74501022 rev=0x12 hdr=0x01
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8131 PCI-X Bridge'
    class    = bridge
    subclass = PCI-PCI
none5 at pci3:1:1:	class=0x080010 card=0x36c01022 chip=0x74511022 rev=0x01 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8131 PCI-X IOAPIC'
    class    = base peripheral
    subclass = interrupt controller
pcib5 at pci3:2:0:	class=0x060400 card=0x000000a0 chip=0x74501022 rev=0x12 hdr=0x01
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8131 PCI-X Bridge'
    class    = bridge
    subclass = PCI-PCI
none6 at pci3:2:1:	class=0x080010 card=0x36c01022 chip=0x74511022 rev=0x01 hdr=0x00
    vendor   = 'Advanced Micro Devices (AMD)'
    device   = 'AMD-8131 PCI-X IOAPIC'
    class    = base peripheral
    subclass = interrupt controller
atapci2 at pci5:3:0:	class=0x018000 card=0x31141095 chip=0x31141095 rev=0x02 hdr=0x00
    vendor   = 'Silicon Image Inc (Was: CMD Technology Inc)'
    device   = 'Sil 3114 SATALink/SATARaid Controller'
    class    = mass storage
amr0 at pci4:1:0:	class=0x010400 card=0x05231000 chip=0x19601000 rev=0x01 hdr=0x00
    vendor   = 'LSI Logic (Was: Symbios Logic, NCR)'
    class    = mass storage
    subclass = RAID


More information about the freebsd-amd64 mailing list