5.4-STABLE problem on 164SX?

[Wilko Bulte]

On Mon, Jun 06, 2005 at 02:00:49PM +0200, Bernd Walter wrote..
> On Mon, Jun 06, 2005 at 01:54:42PM +0200, Wilko Bulte wrote:
> > On Mon, Jun 06, 2005 at 12:30:08AM +0200, Bernd Walter wrote..
> > > On Sun, Jun 05, 2005 at 10:28:38PM +0200, Wilko Bulte wrote:
> > > > On Sun, Jun 05, 2005 at 09:54:05PM +0200, Bernd Walter wrote..
> > > > > On Sun, Jun 05, 2005 at 08:44:56PM +0200, Wilko Bulte wrote:
> > > > > > Folks,
> > > > > > 
> > > > > > After just having built the June 2005 6.0 and 5.4-STABLE
> > > > > > snapshots I tested them on my 164SX.
> > > > > > 
> > > > > > 6.0 works OK, but 5.4-STABLE after a test install gives me a hang
> > 
> > ...
> > 
> > > > > > GEOM: Configure da0c, start 0 length 9139200000 end 9139199999
> > > > > > GEOM: Configure da0d, start 2411544576 length 268435456 end 2679980031
> > > > > > GEOM: Configure da0e, start 2679980032 length 268435456 end 2948415487
> > > > > > GEOM: Configure da0f, start 2948415488 length 6190784512 end 9139199999
> > > > > > Mounting root from ufs:/dev/da0a
> > > > > > start_init: trying /sbin/init
> > > > > > 
> > > > > > <hang>
> > > > > > 
> > > > > > On the DS10 the same thing works just fine.
> > > > > > 
> > > > > > I would appreciate if people with other Alpha models could try the SNAP
> > > > > > to see if it is just my box.  
> > 
> > Well, I just replaced the 2940UW with a Qlogic 1040 (aka KZPBA in DEC speak)
> > driven by isp(4) and it hangs in exactly the same fashion :(
> 
> Mm - yes - after rereading your log it is likely not SCSI at all.
> You see lots of SCSI messages, but all are related to your CD.
> Any difference if you boot -s?

No, nothing changes.

-- 
Wilko Bulte				wilko at FreeBSD.org