5.3-BETA1 OK on AlphaPC64 without graphic card
Gheorghe Ardelean
ardelean at ww.uni-erlangen.de
Mon Aug 30 16:56:27 PDT 2004
Hi,
as I've already tested 2 days ago the 5.3-BETA1 does not boot on my
AlphaPC 64 275MHz machine (with S3 Virge Graphic card).
Today I tested the same machine without the S3 Virge graphic card and it
booted ok. Than I've put in a Matrix Millennium (worked on AXPpci33) but
then I've got again a kernel trap while detecting/initializing sc0?
So from my tests the conclusion, I draw, is that FreeBSD 5.3-BETA1 works
on the above machine only when the frame buffer is removed.
Tomorrow I will test the same way my PWS 433 au.
The boot message without and with graphic card inserted and also the
config of the machine follows bellow.
Best regards
G. Ardelean
===========
================================================================
1.) ##### Booting WITHOUT graphic card #######
================================================================
>>>boot dka100
(boot dka100.1.0.7.0 -flags 0)
block 0 of dka100.1.0.7.0 is a valid boot block
reading 409 blocks from dka100.1.0.7.0
bootstrap code read in
base = 114000, image_start = 0, image_bytes = 33200
initializing HWRPB at 2000
initializing page table at 106000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x1000100010538
OSF PAL rev: 0x100040002012d
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root at ds10.wbnet, Mon Aug 23 08:53:04 UTC 2004)
Memory: 131072 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5babf0+0x4d140 syms=[0x8+0x68e20+0x8+0x55872]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc0000347100...
Unrecognized boot flag '0'.
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA1 #0: Mon Aug 23 22:50:09 UTC 2004
root at ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000e02000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000e020e0.
EB64+
Digital AlphaPC 64 274 MHz, 274MHz
8192 byte page size, 1 processor.
CPU: EV45 (21064A) major=6 minor=2
OSF PAL rev: 0x100040002012d
real memory = 132128768 (126 MB)
Physical memory chunk(s):
0x00e24000 - 0x07d15fff, 116334592 bytes (14201 pages)
avail memory = 114622464 (109 MB)
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
mem: <memory>
apecs0: <DECchip 21072 Core Logic chipset>
pcib0: <2107x PCI host bus adapter> on apecs0
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 4, range 32, base 00010000, size 8, enabled
map[14]: type 1, range 32, base 82040000, size 8, enabled
found-> vendor=0x1000, dev=0x0001, revid=0x11
bus=0, slot=7, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x40 (16000
ns)
intpin=a, irq=1
found-> vendor=0x8086, dev=0x0484, revid=0x03
bus=0, slot=8, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00010100, size 7, enabled
map[14]: type 1, range 32, base 82040100, size 7, enabled
found-> vendor=0x1011, dev=0x0014, revid=0x21
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
sym0: <810a> port 0x10000-0x100ff mem 0x82040000-0x820400ff irq 1 at
device 7.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x82040000
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c2/a0/00/08/00
sym0: Delay (GEN=11): 318 msec, 27950 KHz
sym0: Delay (GEN=11): 308 msec, 28858 KHz
sym0: Delay (GEN=11): 308 msec, 28858 KHz
sym0: interrupting at APECS irq 1
sym0: [GIANT-LOCKED]
PCI-ISA bridge with incorrect subclass 0x0
PCI-ISA bridge with incorrect subclass 0x0
isab0: <PCI-ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
de0: <Digital 21041 Ethernet> port 0x10100-0x1017f mem
0x82040100-0x8204017f irq 3 at device 9.0 on pci0
de0: Reserved 0x80 bytes for rid 0x14 type 3 at 0x82040100
de0: interrupting at APECS irq 3
de0: [GIANT-LOCKED]
de0: SMC 21041 [10Mb/s] pass 2.1
de0: bpf attached
de0: Ethernet address: 00:e0:29:22:a7:cb
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 275001604 Hz (firmware 274725274 Hz)
i8254 clock: 1193170 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: no video adapter found.
sc0: <System console> failed to probe on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: interrupting at ISA irq 4
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
sio1: type 16550A
sio1: interrupting at ISA irq 3
vga0: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
procfs registered
Timecounter "i8254" frequency 1193182 Hz quality 0
Timecounter "alpha" frequency 275001604 Hz quality 0
Timecounters tick every 0.976 msec
lo0: bpf attached
Waiting 15 seconds for SCSI devices to settle
(noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
de0: enabling 10baseT port
md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009c63d8
GEOM: Configure md0a, start 8192 length 4415488 end 4423679
GEOM: Configure md0c, start 0 length 4423680 end 4423679
(probe1:sym0:0:1:0): error 22
(probe1:sym0:0:1:0): Unretryable Error
(probe6:sym0:0:6:0): Retrying Command
pass0 at sym0 bus 0 target 1 lun 0
pass0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
pass0: 10.000MB/s transfers (10.000MHz, offset 8)
pass1 at sym0 bus 0 target 6 lun 0
pass1: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device
pass1: Serial Number 5U394783
pass1: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
cd0 at sym0 bus 0 target 1 lun 0
cd0: <TEAC CD-ROM CD-532S 1.0A> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: cd present [141297 x 2048 byte records]
da0 at sym0 bus 0 target 6 lun 0
da0: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device
da0: Serial Number 5U394783
da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
GEOM: new disk cd0
GEOM: new disk da0
GEOM: Configure da0a, start 0 length 268435456 end 268435455
GEOM: Configure da0b, start 268435456 length 268435456 end 536870911
GEOM: Configure da0c, start 0 length 2164083200 end 2164083199
GEOM: Configure da0e, start 536870912 length 1627212288 end 2164083199
Mounting root from ufs:/dev/md0
WARNING: clock gained 7 days -- CHECK AND RESET THE DATE!
start_init: trying /sbin/init
start_init: trying /sbin/oinit
start_init: trying /sbin/init.bak
start_init: trying /stand/sysinstall
/stand/sysinstall running as init on serial console
These are the predefined terminal types available to
sysinstall when running stand-alone. Please choose the
closest match for your particular terminal.
================================================================
2.) ##### Booting WITH Matrox Millenium PCI graphic card #######
================================================================
Digital AlphaPC 64 274 MHz Console V4.8-1, Feb 20 1997 14:29:41
>>>boot dka100
(boot dka100.1.0.7.0 -flags 0)
block 0 of dka100.1.0.7.0 is a valid boot block
reading 409 blocks from dka100.1.0.7.0
bootstrap code read in
base = 114000, image_start = 0, image_bytes = 33200
initializing HWRPB at 2000
initializing page table at 106000
initializing machine state
setting affinity to the primary CPU
jumping to bootstrap code
Console: SRM firmware console
VMS PAL rev: 0x1000100010538
OSF PAL rev: 0x100040002012d
Switch to OSF PAL code succeeded.
FreeBSD/alpha SRM CD9660 boot, Revision 1.2
(root at ds10.wbnet, Mon Aug 23 08:53:04 UTC 2004)
Memory: 131072 k
Loading /boot/defaults/loader.conf
/boot/kernel/kernel data=0x5babf0+0x4d140 syms=[0x8+0x68e20+0x8+0x55872]
Hit [Enter] to boot immediately, or any other key for command prompt.
Booting [/boot/kernel/kernel] in 9 seconds...
Type '?' for a list of commands, 'help' for more detailed help.
OK boot -v
Entering /boot/kernel/kernel at 0xfffffc0000347100...
Unrecognized boot flag '0'.
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-BETA1 #0: Mon Aug 23 22:50:09 UTC 2004
root at ds10.wbnet:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xfffffc0000e02000.
Preloaded mfs_root "/boot/mfsroot" at 0xfffffc0000e020e0.
EB64+
Digital AlphaPC 64 274 MHz, 274MHz
8192 byte page size, 1 processor.
CPU: EV45 (21064A) major=6 minor=2
OSF PAL rev: 0x100040002012d
real memory = 132128768 (126 MB)
Physical memory chunk(s):
0x00e24000 - 0x07d15fff, 116334592 bytes (14201 pages)
avail memory = 114622464 (109 MB)
null: <null device, zero device>
andom: <entropy source, Software, Yarrow>
mem: <memory>
apecs0: <DECchip 21072 Core Logic chipset>
pcib0: <2107x PCI host bus adapter> on apecs0
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 88000000, size 24, enabled
map[14]: type 1, range 32, base 82850000, size 14, enabled
map[18]: type 1, range 32, base 82000000, size 23, enabled
found-> vendor=0x102b, dev=0x051b, revid=0x00
bus=0, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0xf8 (7440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=2
map[10]: type 4, range 32, base 00010000, size 8, enabled
map[14]: type 1, range 32, base 82854000, size 8, enabled
found-> vendor=0x1000, dev=0x0001, revid=0x11
bus=0, slot=7, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x08 (2000 ns), maxlat=0x40 (16000
ns)
intpin=a, irq=1
found-> vendor=0x8086, dev=0x0484, revid=0x03
bus=0, slot=8, func=0
class=00-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 00010100, size 7, enabled
map[14]: type 1, range 32, base 82854100, size 7, enabled
found-> vendor=0x1011, dev=0x0014, revid=0x21
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0047, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0xff (7650 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=3
pci0: <display, VGA> at device 5.0 (no driver attached)
sym0: <810a> port 0x10000-0x100ff mem 0x82854000-0x828540ff irq 1 at
device 7.0 on pci0
sym0: Reserved 0x100 bytes for rid 0x14 type 3 at 0x82854000
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: open drain IRQ line driver
sym0: using LOAD/STORE-based firmware.
sym0: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 00/00/00/00/00/00
sym0: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = (hex) 03/c2/a0/00/08/00
sym0: Delay (GEN=11): 308 msec, 28858 KHz
sym0: Delay (GEN=11): 314 msec, 28306 KHz
sym0: Delay (GEN=11): 314 msec, 28306 KHz
sym0: interrupting at APECS irq 1
sym0: [GIANT-LOCKED]
PCI-ISA bridge with incorrect subclass 0x0
PCI-ISA bridge with incorrect subclass 0x0
isab0: <PCI-ISA bridge> at device 8.0 on pci0
isa0: <ISA bus> on isab0
de0: <Digital 21041 Ethernet> port 0x10100-0x1017f mem
0x82854100-0x8285417f irq 3 at device 9.0 on pci0
de0: Reserved 0x80 bytes for rid 0x14 type 3 at 0x82854100
de0: interrupting at APECS irq 3
de0: [GIANT-LOCKED]
de0: SMC 21041 [10Mb/s] pass 2.1
de0: bpf attached
de0: Ethernet address: 00:e0:29:22:a7:cb
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
ata0: interrupting at ISA irq 14
ata0: [MPSAFE]
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
ata1: interrupting at ISA irq 15
ata1: [MPSAFE]
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x1f0000
atkbd0: interrupting at ISA irq 1
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0061
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: interrupting at ISA irq 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
mcclock0: <MC146818A real time clock> at port 0x70-0x71 on isa0
Calibrating clock(s) ... PCC clock: 275002883 Hz (firmware 274725274 Hz)
i8254 clock: 1193175 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
ppc0: using extended I/O port range
ppc0: SPP
ppc0: <Parallel port> at port 0x3bc-0x3c3 irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Polled port
ppi0: <Parallel I/O> on ppbus0
ppc0: interrupting at ISA irq 7
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x0>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
fatal kernel trap:
trap entry = 0x3 (instruction fault)
cpuid = 0
fault type = gentrap
pc = 0xfffffc0000735b64
ra = 0xfffffc000070df5c
sp = 0xfffffc0000e09b10
usp = 0x0
curthread = 0xfffffc00008c5cc8
pid = 0, comm = swapper
[thread 0]
Stopped at Ldotrap+0x8: br zero,Lret_result <zero=0x0>
db> tr
Ldotrap() at Ldotrap+0x8
--- root of call graph ---
db>
==========================
3.) ### AlphaPC 64 Config:
==========================
>>>show dev
dka100.1.0.7.0 DKA100 NEC CD-ROM DRIVE:464 1.14
dka600.6.0.7.0 DKA600 IBM DORS-32160 WA6A
dva0.0.0.0.1 DVA0
ewa0.0.0.9.0 EWA0 00-E0-29-22-A7-CB
pka0.7.0.7.0 PKA0 SCSI Bus ID 7
>>>show config
Digital AlphaPC 64 274 MHz
SRM Console V4.8-1 VMS PALcode V5.56-1, OSF PALcode V1.45-4
DECchip (tm) 21064A-2
DECchip (tm) 21071-DA Pass 1
DECchip (tm) 21071-CA Pass 2
MEMORY
128 Meg of system memory
PCI Bus
Bus 00 Slot 07: NCR 53C810 Scsi Controller
pka0.7.0.7.0 SCSI Bus ID 7
dka100.1.0.7.0 NEC CD-ROM
DRIVE:464
dka600.6.0.7.0 IBM DORS-32160
Bus 00 Slot 08: Intel 82378IB PCI to ISA Bridge
Bus 00 Slot 09: DECchip 21041 Network Controller
ewa0.0.0.9.0 00-E0-29-22-A7-CB
ISA
Slot Device Name Type Enabled BaseAddr IRQ
DMA
0
0 MOUSE Embedded Yes 60 12
1 KBD Embedded Yes 60 1
2 COM1 Embedded Yes 3f8 4
3 COM2 Embedded Yes 2f8 3
4 LPT1 Embedded Yes 3bc 7
5 FLOPPY Embedded Yes 3f0 6 2
>>>
More information about the freebsd-alpha
mailing list