5.3-BETA1 on ES40 (go) and AS1200 (no go)

[Bernd Walter]

On Mon, Aug 30, 2004 at 08:34:06PM +0200, Wilko Bulte wrote:
> On Mon, Aug 30, 2004 at 07:46:43PM +0200, Konstantin Saurbier wrote..
> > The AS1200 doesn't boot, boot message and srm show config and show 
> > device are also attached.
> 
> Well, boot it does, but it appears to get stuck in the SCSI probes.
> Have you tried with the RAIDarray3000 disconnected (the HSZ22 device
> is a raidbox). 
> 
> Bernd, AS1200 is close to your AS4100, have you seen something similar?
> 
> > sio0: port may not be enabled
> > sio0: irq maps: 0 0 0 0
> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> > sio0: type 16550A, console
> > sio0: interrupting at ISA irq 4
> > sio1: configured irq 3 not in bitmap of probed irqs 0
> > sio1: port may not be enabled
> > sio1: irq maps: 0 0 0 0
> > sio1 at port 0x2f8-0x2ff irq 3 flags 0x80 on isa0
> > sio1: type 16550A
> > sio1: interrupting at ISA irq 3
> > vga0: <Generic ISA VGA> failed to probe on isa0
> > isa_probe_children: probing PnP devices
> > procfs registered
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > Timecounters tick every 0.833 msec
> > lo0: bpf attached
> > Waiting 15 seconds for SCSI devices to settle
> > (noperiph:sym0:0:-1:-1): SCSI BUS reset delivered.
> > (noperiph:sym1:0:-1:-1): SCSI BUS reset delivered.
> > sym1: enabling clock multiplier
> > sym1: Downloading SCSI SCRIPTS.
> > isp0: driver initiated bus reset of bus 0
> > md0: Preloaded image </boot/mfsroot> 4423680 bytes at 0xfffffc00009c63d8
> > GEOM: Configure md0a, start 8192 length 4415488 end 4423679
> > GEOM: Configure md0c, start 0 length 4423680 end 4423679
> > de0: enabling Full Duplex 100baseTX port
> > (probe5:sym0:0:5:0): Retrying Command
> > (probe5:sym0:0:5:0): error 22
> > (probe5:sym0:0:5:0): Unretryable Error
> > (probe22:isp0:0:0:0): Retrying Command
> > (probe0:isp0:0:0:1): Retrying Command
> > (probe0:isp0:0:0:2): Retrying Command

Extremly interesting - no I don't see it on AS4100, which is still
running 2 month old -current.

But I do see it on NoName, which I booted a recent kernel today.
This happens right now during installworld:
(da1:sym0:0:3:0): tagged openings now 35
(da1:sym0:0:3:0): Retrying Command
(da1:sym0:0:3:0): Request Requeued
(da1:sym0:0:3:0): Retrying Command
(da1:sym0:0:3:0): Request Requeued
(da1:sym0:0:3:0): Retrying Command
(da1:sym0:0:3:0): QUEUE FULL
(da1:sym0:0:3:0): Queue Full


-- 
B.Walter                   BWCT                http://www.bwct.de
bernd at bwct.de                                  info at bwct.de